• Bulletin of the Korean Chemical Society
• /
• 제15권1호
• /
• pp.64-74
• /
• 1994

The nonstoichiometric chalcogenides with NaCl-type structure were prepared and the physical and structural properties were studied. The homogeneous range and the structural change were studied based on X-ray powder diffractions using Rietveld-type full-profile fitting technique. Wide homogeneous ranges were observed in Y-S and Y-Se systems, and relatively narrow homogeneous ranges were observed in Yb-S and Yb-Se systems. Both in $Yb_{1-x}S\;and\;Yb_{1-x}Se$, a vacancy ordering transition occurred in (111) plane direction. The ordered superstructure had cubic symmetry(Fm$\bar{3}m) with doubled unit cell "a" parameter compared to the original NaCl-type. The superlattice developed in a continuous second-order transitiion was characterized by the reduced waved vector k= $(a^*+b^*+c^*)/2$. Y-S system had metallic, and YSe, YbSe system had semiconducting properties in their homogeneous ranges. It was observed that the change of electronic transport properties in extended homogeneous range did not depend on the relativeratio of metal to nonmetal, but on the quantities of vacancies.

• 대한환경공학회지
• /
• 제37권2호
• /
• pp.126-135
• /
• 2015

도시지역의 소하천은 불투수 면적의 증가 및 우수관거의 발달로 인해 유역의 오염물질 및 강우 유출수의 유달률이 증가한 반면 비강우시에 현저하게 유량이 감소되어 하천환경에 심각한 문제를 나타내고 있다. 본 연구에서는 도시 하천의 유량과 수질 문제를 저감하기 위해 개발된 초기강우 저류 및 처리시설을 효율적으로 운영하기 위해 SWMM 도시유역모델 적용 결과와 자동모니터링 시스템을 이용하는 종합관리시스템을 개발하였다. 본 연구의 대상 지역인 관평천 유역의 대부분의 강우사상에서 오염물질은 초기 4시간의 강우 유출수에 집중되어 있는 것으로 관찰되었으며 이는 처리시설의 용량 결정에 있어 가장 중요한 인자로 작용한다. 본 시험 유역에서 유역모델인 SWMM을 이용하여 계산한 결과 처리시설에서 수용할 수 있는 초기우수 유출량은 약 6 mm의 누적강우량으로 산정되었으며 이는 대상지역에서 발생하는 대부분의 소규모 강우에 대해 처리가 가능하다는 것을 의미한다. 본 연구 결과는 강우-유출 모델과 연계한 초기우수 처리시설 운영을 위한 가이드라인을 제시하고 있으며, 하천 수질 모델과 연결할 경우 유입하천에 미치는 영향을 사전에 예측할 수 있으며, 유역의 조건과 연계하여 도시하천의 유역연계 종합 수질관리를 위한 중요한 자료를 제공할 수 있을 것이다.

• 한국군사과학기술학회지
• /
• 제16권2호
• /
• pp.169-174
• /
• 2013

In counterfire warfare, it is important to detect and attack enemy targets faster than the enemy using sensing The grided environmental data is usually provided by the numerical simulation coupled with a data assimilation technique and various inter- or extrapolation algorithms, both of which are based on the observation spanning from simple equipments to satellites. In order to employ the gridded environmental data in the M&S system frequently cutting area and changing its resolution, interpolation algorithms such as linear, cubic spline, IDW, and Kriging methods are necessary to apply. These methods, however, require much time in the M&S system. This paper introduces a technic to reduce time to change the resolution of data. using the binary search method, which finds a point to interpolate quickly and interpolate data in the vicinity of. We also show the efficiency of proposed methods by way of measuring the respective elapsed times.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.211-217
• /
• 2009

The numerical program has been developed for the purpose of the complicate geometries application using CIP method. The non-staggered, non-orthogonal, and unstructured grid system can be also used for the various geometries in the program. For validating CIP solver, the lid-driven cavity flow and solitary wave propagation flow are carried out. Test results show a good agreement with the verified results. The dynamic solver was used for the behavior of moving body. Interface process between the two solvers is introduced. The research was performed on the flow problem around torpedo and log and the flow problem in a tank in order to analyze the three phase flow problem Although the comparison to the verified results was not quantitatively performed, the trend of the results was reasonable.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.716-720
• /
• 2006

In order to examine the effect of constant excitation on nonlinear interactions in vibrating modes of circular plates, we added a constant term to a harmonic excitation. A two-degree-of freedom system is derived by using the Galerkin's procedure. The system is shown to have quadratic and cubic nonlinearities subjected to a harmonic excitation.

• 한국전산유체공학회지
• /
• 제9권3호
• /
• pp.8-17
• /
• 2004

A Semi-Lagrangian method based on CIP(Cubic Interpolated Pseudoparticle)method is proposed and it is applied to solve the two dimensional advection equation. Especially the attentions are given to settle the pole problem and to enhance the accuracy in solving the advection equation on the spherical coordinate system. Tn this algorithm, the CU method is employed as the Semi-Lagrangian method and extended to the spherical coordinate system. To enhance the accuracy of the solution, the spatial discretization is made by CIP method. The mathematical formulation and numerical results are also described. To verify the efficiency, accuracy and capability of proposed algorithm, two dimensional rotating cosine bell problem and the frontogenesis problem are simulated by the present scheme. As results, it is confirmed that the present scheme gives an accurate solution and settles the pole problem in the advection equation on the sphere.

• 소음진동
• /
• 제7권3호
• /
• pp.439-447
• /
• 1997

In this study, the dynamic instabilities of a nonlinear elastic system subjected to follower forces are investigated. The two-degree-of-freedom double pendulum model with nonlinear geometry, cubic spring, and linear viscous damping is used for the study. The constant, the initial impact forces acting at the end of the model are considered. The chaotic nature of the system is identified using the standard methods, such as time histories, power density spectrum, and Poincare maps. The responses are chaotic and unpredictable due to the sensitivity to initial conditions. The sensitivities to parameters, such as geometric initial imperfections, magnitude of follower force, direction control constant, and viscous damping, etc., are analysed. Dynamic buckling loads are computed for various parameters, where the loads are changed drastically for the small change of parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.827-829
• /
• 1999

The identification of nonlinear system using Extended GMDH(EGMDH) is studied in this paper. The proposed EGMDH algorithm is based on GMDH(Group Method of Data handling) method and its structure is similar to Neural Networks. The each node of EGMDH structure utilizes several types of high-order polynomial such as linear, quadratic and cubic, and is connected as various kinds of multi-variable inputs. As the operating condition changes, the parameters of EGMDH will also change, so the proposed scheme by means of the EGMDH method is capable of adapting rapidly to the changing environment. The simulation result shows that the simple nonlinear process can be modeled reasonably well by the proposed method which are simple but efficient.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.686-697
• /
• 2003

A new colloidal silver (Ag) system is present in which a fine colloidal Ag is in situ deposited onto functionalized porous poly (ethylene glycol dimethacrylate) (poly (EGDMA)) microspheres. The effectiveness of Ag deposition was investigated considering the surface characteristics of poly (EGDMA) microspheres. The result reported in this study illustrates that the control of surface area and surface functionality (in this study, a hydroxyl group) of poly (EGDMA) microspheres is an important factor that determines practically the degree of deposition of colloidal Ag. The x-ray analysis showed that Ag nanoparticles were dispersed evenly inner and outer surfaces and had a face center cubic (fee) phase. In the preservative efficacy test, the Ag-containing poly (EGDMA) microspheres had a powerful anti-bacterial activity, showing a high potential for a new preservative in cosmetic industry.

• 시큐리티연구
• /
• 제7호
• /
• pp.7-28
• /
• 2004

This paper is to introduce the foreign civil military enterprise system and to suggest a plan to improve the employment rate of the discharged soldiers who served for a long term and the welfare of soldiers highly. At first, Military Professional Resources Inc., Dyncorp Inc. and Cubic Inc. of the United States, Sandline International Inc. of England and ATCO Frontec Inc. and Ednoonton Inc. of Canada are introduced in this paper. And also, this paper is to analyze employment conditions and difficulties of the discharged soldiers and suggest to establish a institute of tentatively named 'Korean Civil Military Enterprise' in terms of the Government and the Department of Defense. This civil military enterprise is to plan and manage military projects, to research and develop drill manuals and military doctrines and policies and to evaluate and manage the military training. As a pattern of civil military enterprises, three types of Military Support, Military Consulting and Military Provider are presented. Moreover, in order to advance the civil military enterprise, diverse training programs(for public civil investigators, guard advisors, special security guards and security staffs) to utilize all sorts of special military fields are developed.