• 한국염색가공학회지
• /
• 제15권4호
• /
• pp.8-16
• /
• 2003

Poly(trimethylene terephthalate)(PTT) fiber was pretreated with organic solvent/water solution of various compositions. The organic solvents used in this experiment were benzyl alcohol, n-buthanol, and N,N-dimethylformamide(DMF). Density of the fibers were investigated as a measure of crystallite region. The dye uptake increased in the order of pretreatment with hot water < untreated < 5% benzyl alcohol < 100% benzyl alcohol < 90% benzyl alcohol; hot water < untreated $\risingdotseq$ 5% butanol < 100% beutanol < 90% butanol; hot water $\risingdotseq$ 5% DMF < untreated < 90% DMF < 100% DMF. The dye uptake increases with increase of crystallinity. It seems likely that the recrystallization process during the pretreatment with organic solvent/water solutions leads to an increase in the microvoid and then a large increase in the dye uptake. Also the dyeing rate increased and the dyeing transition temperature decreased with the pretreatments. The results obtained are corresponds with the plasticization of the fiber structure formed during the pretreatrnent.

• 한국염색가공학회지
• /
• 제8권6호
• /
• pp.33-39
• /
• 1996

The purpose of this study was to investigate the structural characteristics, mechanical properties, and stress-relaxation behavior of PET filament, which were prepared at various spinning speeds(1650, 3300, 4500, 5000, 5500, and 6000 m/min) and anneal(12$0^{\circ}C$, 20 min & 15$0^{\circ}C$, 40 min). In 4500 m/min of spinning speed the crystallinity, crystallite size, and degree of orientation of PET filament rapidly increased. By increasing spinning speed, the temperature dependence of stress-relaxation sharply decreased. Same results were obtained from heat-treated samples. As a result, activation energy for stress-relaxation increased with the crystallinity and spinning speed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.656-659
• /
• 2005

Nanocrystalline ceria powders were prepared by hydrothermal treatment of cerium(IV) ammonium nitrate solution without a precipitating agent. A systematic investigation of the effect of hydrothermal temperature and react ion time on the physical properties of the product powders was carried out. When the hydrothermal temperature was increased, the product ceria powders exhibited larger crystallite size with higher yield. Increasing reaction time produced more crystalline ceria powders attributed to further hydrothermal reactions and structural rearrangement. The physical properties of ceria powders can be control led by adjusting the hydrothermal conditions.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.65-65
• /
• 2003

Chemical mechanical polishing (CMP) is one of the most important processes in recent ULSI (Ultra Large Scale Integrated Circuit) manufacturing technology. Recently, ceria slurries with surfactant have recently been used in STI-CMP,[1] became they have high oxide-to-nitride removal selectivity and widen the processing margin The role of the abrasives, however, on the effect of planarization on STI-CMP is not yet clear. In this study, we investigated how the crystal characteristic affects the planarization efficiency of wafer surface with controlling crystallite size and poly crystalline abrasive size independently.

• 한국분말재료학회지
• /
• 제11권6호
• /
• pp.467-471
• /
• 2004

In order to fabricate a high density sintered body of ITO, nano-sized ITO powders were synthesized by coprecipitation methods. Aqueous solutions of indium and tin salts were mixed and coprecipitated by changing their pH. Coprecipitated ITO powders possessed 20-30 nm crystallite size and a relatively high BET value ($35m^2/g$), however, aggregation of particles were occurred. Therefore, a novel recrystallization technique was applied in order to eliminate the aggregates. The recrystallized ITO material consists of a little bit larger needlelike crystals, $20nm{\times}80nm$, and it possesses a higher BET value $(57m^{2}/g)$ compared to the plain coprecipitated material $(35m^{2}/g)$. Metastable phase formation and higher content of aggregated particles were observed in the coprecipitated materials. Densification was 95% to 98% complete after 5 hour sintering at $1500^{\circ}C$ for the recrystallized powders while densities of the coprecipitated powders were below 75%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.165-169
• /
• 2001

Carbon nitride films were grown on Si (100) substrate by a laser-electric discharge method with and without a magnetic field assistance. The magnetic field leads to vapor plume plasma expending upon the ambient arc discharge plasma area. Influence of the magnetic field has resulted in increase of a crystallite size in the films due to bombardment (heating) of Si substrates by energetic carbon and nitrogen species generated during cyclotron motion of electrons in the discharge zone. Many crystalline grains were observed in the morphology of the deposited films by scanning electron microscopy. In order to determine the structural crystalline parameters, X-ray diffraction (XRD) was used to analysis the grown films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.621-624
• /
• 2002

Lanthanum nickel oxide$(LaNiO_3)$ powders have been prepared via a mechanochemical processing without any additional heat treatment. When a mixed lanthanum and nickel oxide was mechanically activated for 6 hours with 450 rpm, a stable and single phase perovskite powder was successfully synthesized and its crystallite size of about 90 nm is calculated by using the Scherrer equation.

• 한국표면공학회지
• /
• 제30권3호
• /
• pp.202-212
• /
• 1997

The composition and the microstructure of the Sn-Ni alloy electrodeposited in pyrophosphate bath were investigated according to the electrolysis conditions. The cathode current efficiency increased with the addition of $NH_4CI$ and glycine, while it decreased with the increase of current density. The Sn content of the alloy deposits increased with the increase of $NH_4CI$ in the bath. The alloys with 51~71wt.% Sn had the NiSn single phase structure. The preferred orientation of the single phase alloys changed from (110) to (110)+(101) with the increase of current density and cathode overpotential. The single phase alloys with 50~60wt.%Sn had the smooth surface structure with fine crystallite, while the multiphase alloys showed the surface structure with crystal size and cracks at high curret density.

• Carbon letters
• /
• 제9권2호
• /
• pp.127-130
• /
• 2008

This study aims to find a correlation between XRD and Raman result of the activated carbon fibers as a function of its activation degrees. La of the isotropic carbon fiber prepared by oxidation in carbon dioxide gas have been observed using laser Raman spectroscopy. The basic structural parameters of the fibers were evaluated by XRD as well, and compared with Raman result. The La of the carbon fibers were measured to be 25.5 ${\AA}$ from Raman analysis and 23.6 ${\AA}$ from XRD analysis. La of the ACFs were 23.6 ${\AA}$ and 20.4 ${\AA}$, respectively, representing less ordered through activation process. It seems that the $I_D/I_G$ of Raman spectra were related to crystallite size(La). Raman spectroscopy has demonstrated its unique ability to detect structural changes during the activation of the fibers. There was good correlation between the La value obtained from Raman and XRD.

• 한국세라믹학회지
• /
• 제33권12호
• /
• pp.1353-1364
• /
• 1996

Recently semiconductor doped glasses have attracted attention as nonlinear optical materials because of their large third order nonlinear optical properties. The transparent and homogeneous CdS-doped SiO2 glass thin films were obtained by the dip=coating process of the sol-gel method. Thin films were consisted of glasses containing CdS microcrystallites which were formed by dissolved Cd2+ and S2- ions in a SiO2 matrix solutions. A subsequent thermal treatment of this samples led the formation of colloidal agglomerates and finally of microcrystallites. The size of CdS microcrystallites was about 4 to 15 nm after thermal treatments at various heating conditions. From the optical absorption spectra of the CdS-doped SiO2 glass films it was found that the absorption edge was blue-shifted compared with that of the bulk CdS crystal(~2, 4 eV) and that the amount of energy shift was inversely proportional to the crystal size. And the band gap energy increased with the decrease in crystallite size indicating that the quantum size effects occured.