• Restorative Dentistry and Endodontics
• /
• 제42권3호
• /
• pp.240-252
• /
• 2017

The restoration of endodontic tooth is always a challenge for the clinician, not only due to excessive loss of tooth structure but also invasion of the biological width due to large decayed lesions. In this paper, the 7 most common clinical scenarios in molars with class II lesions ever deeper were examined. This includes both the type of restoration (direct or indirect) and the management of the cavity margin, such as the need for deep margin elevation (DME) or crown lengthening. It is necessary to have the DME when the healthy tooth remnant is in the sulcus or at the epithelium level. For caries that reaches the connective tissue or the bone crest, crown lengthening is required. Endocrowns are a good treatment option in the endodontically treated tooth when the loss of structure is advanced.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.512-517
• /
• 1993

The cold rolled strip meets continuously rising demands on the less deviation of thickness at the width direction of their rolled products. Especially, the special interest has been to find the methods to reduce the edge drop which influences seriously on the yield losses and the quality of the rolled products. In this study, the influence of hot coils on the thickness profile of cold rolled strip was analyzed. For obtainint the tapered work roll shig\ft conditions, the thermal crown and the flattening between the work roll and the strip were calculated, and the main parameters which have mostly effects on the edge drop were simulated. Also the obtained conditions from the simulation were applied to Tandem Cold Rolling Mill to investigate the change of the edge drop and the crown ratio depending on the amount of work roll taper and the length of contact of taper. The results of the application led to better thickness profile than conventional one.

• 한국항만학회지
• /
• 제8권1호
• /
• pp.23-30
• /
• 1994

This study discusses the wave transformation(wave reflection and transmission) by a impermeable submerged breakwater with one ray, and integrated horizontal wave pressure acting on the structure. Numerical method in this study is based on the simplified eigenfunction expansion method and linear wave theory. Although this method is very simple, the results give good agreement with the one of the strict eigenfunciton expansion method, especially, in case that the crown width of the submerged breakwater becomes longer and its crown water depth shallower. Therefore, it is concluded that this simplified method is one good method in planning coastal structures as like the submerged breakwater in this study, and computing their wave transformations.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2022년도 하계학술대회
• /
• pp.78-80
• /
• 2022

Strawberry (Fragaria × ananassa) cultivation methods are rapidly changing from traditional soil cultivation to high bed hydroponics, which are easy to agricultural working. The objective was to evaluate the growth characteristics of three strawberry cultivars cultivated high bed system. The "Seolhyang", "Altaking", and "Keumsil" strawberry plants were transplanted in a glass-type greenhouse at Kyungpook National University Gunwi Agricultural Field. The cultivation period was approximately seven months from September 17, 2021 to April 21, 2022. Growth parameters measured including the number of leaves, plant height, petiole length, leaf length, leaf width, and crown diameter at two-week intervals. The environmental parameters for each location in the greenhouse were collected. Plant height in all cultivars continued to decrease from the early stage to the late stage of growth. The crown diameter was increased by 50 DAT, and then gradually decreased until late growth stage in all cultivars. Results indicated that the growth parameters represented to vary according to the cultivar of strawberry plants.

• 구강회복응용과학지
• /
• 제18권3호
• /
• pp.205-215
• /
• 2002

This study investigated the compressive fracture strength of Targis ceromer crown by the difference of occlusal thickness on a maxillary first premolar. Control group was a castable IPS-Empress all-ceramic crown with occlusal thickness of 1.5 mm constructed by layered technique. Experimental groups were Targis crowns having different occlusal thicknesses of 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm, respectively. The classification of Targis group is T10, T15, T20, T25 and T15N (for no-thermocycling and occlusal thickness of 1.5mm). Ten samples were tested per each group. Except occlusal thickness, all dimension of metal die is same with axial inclination of $10^{\circ}$and marginal width 0.8mm chamfer. All crowns were cemented with Panavia F and thermocycled 1,000 times between $5^{\circ}$ and $55^{\circ}$ water bath with 10 sec dwelling time and 10 sec resting time. The compressive fracture strength was measured by universal testing machine. The results were as follows : 1. Fracture strength was increased as the occlusal thickness increased : compressive fracture strength of Group T10, T15, T20, T25 was $66.65{\pm}4.88kgf$, $75.04{\pm}3.01kgf$, $87.07{\pm}7.06kgf$ and $105.03{\pm}10.56kgf$, respectively. 2. When comparing material, Targis crown had higher fracture strength than IPS-Empress crown : the mean compressive strength of group T15 was $75.04{\pm}3.01kgf$ and the value of group Control was $37.66{\pm}4.28kgf$. 3. Fracture strength was decreased by thermocycling : the compressive fracture strength of T15 was $75.04{\pm}3.01kgf$, which is lower than $90.69{\pm}6.88kgf$ of group T15N. 4. The fracture line of crowns began at the loading point and extended along long axis of tooth. IPS-Empress showed adhesive failure pattern whereas Targis had adhesive and cohesive failure. In the SEM view, stress was distributed radially from loading point and the crack line was more prominent on Targis crown.

• 한국산림과학회지
• /
• 제69권1호
• /
• pp.1-5
• /
• 1985

잣나무 수형목(秀型木) 23클론에 대(對)한 수고(樹高), 흉고직경(胸高直徑), 수관폭(樹冠幅), 가지길이 및 가지 직경(直徑)의 생장특성(生長特性)을 측정(測定)하여 다음과 같은 결과(結果)을 얻었다. 1) 생장(生長)이 가장 우수(優秀)한 클론은 가장 불량(不良)한 클론에 비(比)하여 수고(樹高)는 41%, 흉고직경(胸高直徑)은 81%, 수관폭(樹冠幅)은 50%, 가지길이는 55% 및 가지직경(直徑)은 83%의 양호(良好)한 생장(生長)을 보였다. 2) 각(各) 생장특성(生長特性)은 클론간(間)에 유의차(有意差)가 있었으며, 각(各) 생장특성간(生長特性間)의 상관(相關)은 고도(高度)의 정(正)의 상관(相關)을 나타냈다 ($r=0.418^*{\sim}0.917^{**}$). 3) 각(各) 생장특성(生長特性)에 대(對)한 광의(廣義)의 유전력(遺傳力)은 수고(樹高)에서 0.46, 흉고직경(胸高直徑)에서 0.45, 수관폭(樹冠幅)에서 0.28, 가지길이에서 0.26 및 가지직경(直徑)에서 0.18로 추정(推定)되었다. 4) 개량효과(改良効果)는 23 클론 중(中) 생장(生長)이 우수(優秀)한 3 클론을 각(各) 특성별(特性別)로 선발(選拔)하여 4.1%~11.1%까지 예측(豫測)할 수 있었다.

• 한국측량학회지
• /
• 제30권3호
• /
• pp.269-277
• /
• 2012

도시지역에서 가로수는 이산화탄소를 저감하고 녹지 공간을 제공하는 유용한 도시시설물 중의 하나이다. 가로수는 일반적으로 지자체에서 관리되고 있으며 가로수의 위치, 수고, 수관폭 등의 정보를 체계적으로 획득하기 위하여 항공 라이다를 사용하는 것이 효율적이다. 본 연구에서는 항공 라이다 자료에서 추정한 가로수 꼭대기점을 정제하고, 가로수의 영역을 분리하는 방법을 제안하였다. 제안 방법의 검증을 위하여 가로수의 개수, 수고, 수관폭 등을 수치적으로 정확하게 알 수 있는 모의 항공 라이다 자료를 생성하였다. 자료처리 과정은 먼저 개별 가로수의 영역을 구분하기 위하여 지면과 비지면을 구분하는 필터링을 수행하였다. 그리고 나서 비지면점에서 건물 등의 비가로수 정보를 제거하고, 가로수의 꼭대기점을 추정하였다. 가로수의 영역은 추정된 가로수의 꼭대기점과 지면점을 서로 잇는 직선의 교차점을 이용하여 설정하였다. 모의자료를 이용한 실험을 통해 수목의 꼭대기점 추정에서 발생되는 오추정점을 정제하고, 가로수의 영역설정을 통해 수고, 수관폭, 가로수의 위치정보를 획득할 수 있었다.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.79-92
• /
• 2000

The purpose of this study was to estimate the morphology and the size of permanent maxillary molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study. The subjects were taken impression to make study model. On the study model, authour three times measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. In the maxilary first molar's clinical crown height, mesiolingual cusp height was 6.34mm, mesiobuccal cusp height was 6.05mm, distobuccal cusp height was 5.20mm. And in the maxillary second molar's clinical crown height, mesiobuccal cusp height was 5.85mm, mesiolingual cusp height was 5.71mm, distobuccal cusp height was 5.51mm, distolingual cusp height was 3.53mm. This result considered that the maxillary first molar inclined to distobuccal, and the maxillary second molar more upright than the maxillary first molar. 2. In the width of clinical crown, the maxillary first molar was 10.43mm, the maxillary second molar was 10.20mm, and the difference between the first molar's width and the second molar's width was 0.23mm. 3. The crown thickness was measured divided into mesial buccolingual half and distal buccolingual half. The mesial buccolingual half was 11.14mm, and distal buccolingual half was 10.35mm in the maxillary first molar, and in the maxilary second molar, mesial buccolingual half was 11.25mm, and distal buccolingual half was 9.72mm. This result considered that height of convergency located in mesial half of crown. 4. In the buccal groove length, total length and ratio, the maxillary first molar was 52.5%, the maxillary second molar was 50%. And the development of buccal groove in the maxillary first molar was 59% in case of the well developed buccal groove and 41% in case of the weak developed one. And frequency of buccal pit of the maxillary first molar was 12.5%. Whereas, the frequency of buccal of the well developed buccal groove in the maxillary second molar was 37% and that of the weak developed one was 63%. And frequency of buccal pit of the maxillary second molar was not seen. 5. The 3 cusp type tooth cannot be found in the maxillary first molar and the frequency of 3 cusp type tooth in the maxillary second molar was as small as 6% 6. In the case of 4 cusp type tooth, the size of distal lingual cusp molar was difference between in the maxillary first molar and in the maxillary second molar by about 1mm. 7. The intercuspal distance was similar in the maxillary first premolar and second molar. And intercuspal distanc of mesial half of the maxillary first molar and the maxillary second molar was silmillar, too. 8. The an measurement of occlusal surface in 4 cusp type tooth showed that the angle of occlusal surface between the distobuccal and mesiolingual was an obtuse angle, and the angle of occlusal surface between mesiobuccal and distolingual was an acute angle in the both cases of maxillary first and second molar. 9. The measurements of the development of Carabelli cusp showed that the frequency of the well developed one was 7% and that of the weak developed one was 56% in the maxillary first molar. And there cannot be found the well developed one and can be found 2.5% only in the case of the weak developed one in the maxillary second molar. 10. The well developed oblique ridge in the maxillary first molar showed the 100% frequency and that in the maxillary second molar showed the 85.5% frequency. The frequency of mesiomarginal ridge tubercle in the maxillary first molar was 82% and that in the maxillary second molar was 30.5%. And the frequency of distal accessory tubercle in the maxillary first molar can be seen about 19% and that in the maxillary second molar can be seen about 12%.

• 대한소아치과학회지
• /
• 제43권1호
• /
• pp.60-69
• /
• 2016

영구 전치의 복합 치관-치근 파절은 심미적, 기능적 문제 뿐 아니라 심리적 문제도 발생시킨다. 그러므로 파절에 대한 치료는 매우 중요하며, 여러 분야에 걸친 종합적 치료가 요구된다. 본 증례는 두 환자에서의 외상으로 인한 상악 전치의 복합 치관-치근 파절에 대한 임상적 치료 과정을 서술하였다. 근관치료와 근첨형성술이 각 환자에게 시행되었으며, 파절선을 치은 상방으로 노출시키고 생물학적 폭경을 재확립하기 위해 교정적 정출을 시행하였다. 이후 유지기간을 두었고, 그 기간 동안 치아에 임시수복을 시행하였다. 최종적으로 CAD/CAM을 이용한 세라믹 크라운 수복을 시행하였다. 이후 정기 검진 때에도 해당 치아들은 만족스러운 기능적, 심미적 결과를 보였으며, 두 환자 모두에서 재발은 나타나지 않았다. 치주조직 또한 건강한 상태를 보였다.

• Journal of Forest and Environmental Science
• /
• 제16권1호
• /
• pp.34-41
• /
• 2000

솔잎혹파리 피해임지의 특성에 따른 수세변동을 구명하였다. 솔잎혹파리 피해도("심", "중", "경")별로 구분하여 수세를 조사한 결과 피해가 심한 지역의 수목은 수세가 현저하게 약화되었으며, 수목의 임분밀도("밀", "중", "소")별로 구분한 경우는 피해도와 관계없이 임분밀도가 낮은 임분에서 수목의 수세가 강하게 나타났다. 수목의 외형적 인자중 수관폭과, 흉고직경이 작은 개체에 비하여 큰 개체의 수세가 모든 임분에서 강하게 나타났다. 각 임분에서 전기저항치와 수관면적과의 관계는 피해도 "심" 임분에서는 수관면적이 $13.4m^2$ "중" 임분에서는 $10.9m^2$, "경" 임분에서는 $7.9m^2$로 피해가 심할수록 수관면적이 넓어야 임목이 생존할 가능성이 높은 전기저항치($15k{\Omega}$ 이하)가 나타나는 것으로 파악되었다.