• Geophysics and Geophysical Exploration
• /
• v.6 no.3
• /
• pp.138-142
• /
• 2003

Crosswell seismic data were acquired in three sections crossing a tunnel of 3 different types; one was empty, another was ailed by sand, and the other was filled by rock debris. Both the P- and S-wave first arrivals were picked and the traveltime tomography was conducted to generate the P- and S- wave velocity tomograms on the all three sections. Among six tomograms, only one tomogram shows a low velocity zone that can be interpreted as a tunnel image. The tomogram is the P wave velocity image of a section that crosses an empty tunnel. The result of numerical analysis for the spatial resolution of the traveltime tomography was consistent to this finding.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.223-228
• /
• 2007

First arrival signals of multi-frequency crosswell seismic data, acquired in wells drilled in granitic rock, were analyzed to investigate the characteristic behavior of the signals at the shear zones. Dominant frequencies of the sources were; 10-, 20-, 40-, 56-, and 80 kHz. No obvious changes in the waveform at the shear zones were found; however, at the shear zones, some degree of velocity reductions were observed in the signals of all frequency sources. The 80 kHz signal is slightly faster than 10 kHz signal in the survey region, and the velocity difference between the two signals were found largest at the shear zone where the permeability measured greatest in the survey interval.

• Geophysics and Geophysical Exploration
• /
• v.8 no.4
• /
• pp.280-286
• /
• 2005

Geological sequestration of carbon dioxide ($CO_2$) is one of the most effective strategies far long-term removal of greenhouse gas from atmosphere. This paper reviews three projects for the $CO_2$ sequestration in geological formation. A unique $CO_2$ injection into a marine aquifer has been successfully monitored with repeated surface seismic measurements in the North Sea Sleipner West field. The seismic images reveal the extent and internal shape of the $CO_2$ bubble. Massive miscible $CO_2$ has been injected into a complex fractured carbonate reservoir at the Weyburn oil filed. High-resolution time-lapse P-wave data were successfully obtained to map the features of $CO_2$ movements within the two thin zones of different lithology. From the time-lapse crosswell EM imaging at the Lost Hills oil field in central California, U.S.A., the replacement of brine with $CO_2$ has been confirmed through a decrease of conductivity. The conductivity image was successfully compared with induction logs observed in the two wells.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.123-127
• /
• 2005

Surface refraction and crosswell seismic survey conducted as a part of geoscientific studies applied in an area of ground water reservoir shows that, 1) the average velocity with respect to depth is about 250 m/s for the surface layer (<4m), 2,500 m/s for the weathered formation, and greater than 3,500 m/s for the bed rocks, 2) the depth to the bedrock derived from the seismic studies and the sonic log (17m) is somewhat different from the depth obtained from the core study (25m).

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.64-70
• /
• 1998

Diffraction tomography (DT) is a quantitative technique for high resolution subsurface imaging. In general DT algorithm is used for crosswell imaging. In this study high resolution GPR DT algorithm which is able to reconstruct high resolution image of subsurface structures in multi-monostatic geometry is developed. Developed algorithm is applied to finite difference data and its criteria of application and its limit are studied. Inversion parameters (number of imaging frequency, regularization factor, frequency range) are deduced from isolated weak scattering model. And the usuability of the algorithm is proved by applying to models which break the weak scattering approximation.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.25-30
• /
• 1998

Time-lapse crosswell seismic data, recorded before and after the cavity filling, showed that the filling increased the velocity at a known cavity zone in an old mine site in Inchon area. The seismic response depicted on the tomogram and in conjunction with the geologic data from drillings imply that the size of the cavity may be either small or filled by debris. In this study, I attempted to evaluate the filling effect by analyzing velocity measured from the time-lapse tomograms. The data acquired by a downhole airgun and 24-channel hydrophone system revealed that there exists measurable amounts of source statics. I presented a methodology to estimate the source statics. The procedure for this method is: 1) examine the source firing-time for each source, and remove the effect of irregular firing time, and 2) estimate the residual statics caused by inaccurate source positioning. This proposed multi-step inversion may reduce high frequency numerical noise and enhance the resolution at the zone of interest. The multi-step inversion with different starting models successfully shows the subtle velocity changes at the small cavity zone. The inversion procedure is: 1) conduct an inversion using regular sized cells, and generate an image of gross velocity structure by applying a 2-D median filter on the resulting tomogram, and 2) construct the starting velocity model by modifying the final velocity model from the first phase. The model was modified so that the zone of interest consists of small-sized grids. The final velocity model developed from the baseline survey was as a starting velocity model on the monitor inversion. Since we expected a velocity change only in the cavity zone, in the monitor inversion, we can significantly reduce the number of model parameters by fixing the model out-side the cavity zone equal to the baseline model.