• 한국전산유체공학회지
• /
• 제4권1호
• /
• pp.27-33
• /
• 1999

Spiral tube heat exchangers can find numerous applications in many engineering fields. Flow in spiral tubes is interest to engineers due to occurrence of secondary flow which enhances the cross-sectional mixing and the heat transfer rate. In the present study, an incompressible viscous 3-D flow in spiral tubes with rectangular cross-section of various torsion rate and Reynolds number is studied by using a finite volume method. It is shown that the axial velocity profile is affected by the secondary flow motion. Because there is some difference from correlation proposed by Hur et al., a lot of analysis and arrangement of experimental results are needed. This study showed the results of variation of hydrodynamic entry length for torsion and Re numbers.

• Steel and Composite Structures
• /
• 제42권5호
• /
• pp.599-615
• /
• 2022

In the present paper, the numerical dynamic analysis of a functionally graded nano-scale nonuniform tube was investigated according to the high-order beam theory coupled with the nonlocal gradient strain theory. The supposed cross-section is changed along the pipe length, and the material distribution, which combines both metal and ceramics, is smoothly changed in the pipe length direction, which is called axially functionally graded (AFG) pipe. Moreover, the porosity voids are dispersed in the cross-section and the radial pattern that the existence of both material distribution along the tube length and porosity voids make a two-dimensional functionally graded (2D-FG) truncated conical pipe. On the basis of the Hamilton principle, the governing equations and the associated boundary conditions equations are derived, and then a numerical approach is applied to solve the obtained equations.

• 터널과지하공간
• /
• 제27권4호
• /
• pp.195-204
• /
• 2017

본 사례연구에서는 신림~봉천터널 지하환기소 대단면 터널의 시공 사례를 소개하였다. 환기갱(폭 7.8 m, 높이 6.6 m)에서 환기소(축류팬실, 폭 20.8 m, 높이 12.3 m)로 터널 단면이 확대되는 구간에 대해 안전성 및 시공성 등을 고려하여 점진적인 확대 굴착 방안 및 Q 시스템을 이용한 확폭 구간의 임시 보강 방안이 검토되었다. 확폭이 완료된 이후 대단면 터널은 현장의 암반조건을 확인하고, 전산해석을 이용한 터널의 안정성 검토 등을 통해 암반등급에 따라 굴진장을 일부 조정하고, 터널 상부 굴착을 분할 없이 전단면 굴착으로 변경하여 시공성을 향상시켰다. 본 사례연구에서 소개한 시공 사례가 향후 유사한 조건의 지하환기소 또는 4차로 도로 등의 대단면 터널의 설계 및 시공에 유용한 참고 자료가 될 수 있기를 기대한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권8호
• /
• pp.1171-1176
• /
• 1999

The precision and reliability of the Computer Image Analysis technique using a desk top computer for extracting information from carcass cross section scans was evaluated by the repeatability (R) and coefficient of variation (CV) for error variance. The 6th and 7th ribs cross section of carcasses from 55 fattened Japanese Black steers were used. The image analysis was conducted using a desk top computer (Macintosh-Apple Vision 1710 Display) connected to a scanner and an image capture camera. Two software applications, Adobe Photoshop and Mac Scope were used interchangeably. The information extracted and measured were individual muscle area, circumference length, long and short axes lengths, muscle direction; distance between any two muscle centers of gravity; cross section total area, lean, fat, and bone. The information was extracted after the processes of scanning, digitization, masking, muscle separation, and binarization. When using the Computer Image Analysis technique by desk top computer, proper digitization and selection of scanning resolution are very important in order to obtain accurate information. The R-values for muscle area, circumference, long and axes lengths, and direction ranged from 0.95 to 0.99, whereas those of the distance between any two muscle centers of gravity ranged from 0.96 to 0.99, respectively. For the cross section total area, lean, fat, and bone it ranged from 0.83 to 0.99. Excellent repeatability measurements were observed for muscle direction and distance between any two muscle centers of gravity. The results indicate that the Computer Image Analysis technique using a desk top computer for extracting information from carcass cross section is reliable and has high precision.

• 대한토목학회논문집
• /
• 제30권3A호
• /
• pp.241-256
• /
• 2010

본 연구에서는 변장비 70에 가까운 도전적인 현수교 단면을 개발하는데 목적을 두고 있다. 이를 위하여 먼저 강박스 현수교의 제원을 수집 분석하였다. 그 결과를 보면 강박스 현수교에서 경간장과 형상변수(교폭, 형고, 변장비, 고폭비)는 상관관계가 낮았고 고유진동수와 형상변수의 상관관계도 낮은 것으로 나타났으며, 상관관계가 높은 경간장과 고유진동수 관계는 신뢰구간별 추정식을 제시하였다. 그리고 교폭, 진동수비, 질량, 질량관성모멘트, 수직 및 비틈 고유진동수 변화에 따른 플러터 풍속의 민감도 분석을 실시하였는데, 타 변수보다 비틈 고유진동수가 플러터 풍속에 미치는 영향이 가장 큰 것으로 나타났다. 주경간장 1111 m인 현수교의 내풍 단면을 개발하기 위하여 최소 단면폭과 형고를 제약조건으로 하여 총 30개의 단면에 대한 풍동실험을 실시하고, 이로부터 한계풍속 기준을 충분히 만족하는 단면을 찾았다. 그리고 다중모드 플러터 해석으로 개발한 단면의 내풍안정성을 검증하였다. 본 연구에서 제시한 세장 단면은 향후 장대 현수교 설계시 활용할 수 있을 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.197-201
• /
• 2007

Vibration characteristics of an annular cylindrical fuel rod, which was proposed as a candidate design of fuel's cross section for the ultra-high burnup nuclear fuel, according to the cross-sectional dimensions and the number of supports or the span length were analytically studied. Finite element(FE) modeling for the annular cross sectional fuel was based on the methodology, that have been proven by the test verification, for the conventional PWR nuclear fuel rod. A commercial FEA code, ABAQUS, was used for the FE modeling and analysis. A planar beam element (B21) that uses a linear interpolation was used for the fuel rod and a linear spring element for the spring and dimple of the SG. Natural frequencies and mode shape were calculated according to the preliminary design candidates for the fuel's cross sectional dimension and the number of span. From the analysis results, the design scheme of the annular fuel compatible to the present PWR nuclear reactor core was discussed in terms of the number of supports and fuel's cross section.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.34-38
• /
• 2010

An analytical solution procedure for the dynamic response of beams with variable properties is developed by using an asymptotic solution and the Green's function. This asymptotic closed form solution is derived for the transverse vibration of beams under the assumption of slowly varying properties, such as mass, cross-section, tension etc., along the beam length. However, this solution is still found to be very accurate even in the case of large variation, such as step change in cross-section, mass, and tension. Therefore, this derived asymptotic closed form solution and the Green's function can be easily applied to find dynamic responses for various kind of beam vibration problems.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 춘계학술대회논문집
• /
• pp.130-135
• /
• 1997

A kinematically admissible velocity field is developed for the analysis of twisting of extruded products. The twisting of extruded product is caused by the linearly increased rotational velocity from the center on the cross-section of the workpiece at the die exit. In the analysis, the rotational velocity in angular direction is assumed by the multiplication of radial distance and angular velocity. The angular velocity is zero at the die entrance and is increased linearly by longitudinal distance from die entrance. The increase rate of angular velocity is determined by the minimization of plastic work. The results of the analysis show that the angular velocity of the extruded product changes with the aspect ratio of product and increases with the decreases in die length and in eccentricity of gravity center of the cross-section of workpiece at die entrance from that of the cross-section at the die exit.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1997년도 추계학술대회논문집
• /
• pp.49-52
• /
• 1997

The kinematically admissible velocity field is developed for the analysis of the curving of an eccentric extrusion. The curving of product in extrusion is caused by the difference of the linearly distributed longitudinal velocity on the cross-section of the workpiece at the dies exit. The result of the analysis show that the curvature of product increases with the increase in eccentricity of gravity center of the cross-section of the workpiece at the die entrance from that of the cross-section at the die exit. It also increase with the die land dimension. By the DEFORMTM-3D analysis, the curving of T-shaped product in extrusion is changed by the eccentricity, die land length and the friction constant. The result of the analysis by DEFORMTM-3D software shows that the curvature of circular shaped product increases with the eccentricity. The two analysis and one experiment show the curving phenomenon in eccentric extrusion process.

• 한국항공운항학회지
• /
• 제21권2호
• /
• pp.7-14
• /
• 2013

In this paper, the optimal design of composite rotor blade cross-section is performed using a genetic algorithm. Skin thickness, torsion box thickness and skin lay-up angle are adopted as discrete design variables. The position and width of a torsion box are considered as continuous variables. An object function of optimal design is to minimize the mass of a rotor blade, and constraints are failure index, center mass, natural frequency and blade minimum mass per unit length. Finally, design variables such as the thickness and lay-up angles of a skin, and the thickness, position and width of a torsion box are determined by using an in-house program developed for the optimal design of rotor blade cross-section.