• 한국정밀공학회지
• /
• 제27권4호
• /
• pp.102-108
• /
• 2010

Projection microstereolithography is a process of fabricating a micro-structure by using dynamic mask such as digital micromirror device(DMD). DMD shapes the beam into cross-sectional image of structure. Photocurable resin is cured by the beam and stacked layer on top of layer. It is difficult to deliver the beam from the DMD to the photocurable resin without any distortions. We assume that the beam exposed to the resin by 1 pixel of DMD has Gaussian distribution, so the shaped beam reflected by the DMD affects its neighboring area. Curing pattern corresponding to a cross-sectional images is predicted by superposition of pixels of Gaussian distribution and it is similar to cured shape.

• Journal of Preventive Medicine and Public Health
• /
• 제24권1호
• /
• pp.29-36
• /
• 1991

A multiple regression analysis using ordinary least square (OLS) is frequently used for the projection of health expenditure as well as for the identification of factors affecting health care costs. Data for the analysis often have mixed characteristics of time series and cross section. Parameters as a result of OLS estimation, in this case, are no longer the best linear unbiased estimators (BLUE) because the data do not satisfy basic assumptions of regression analysis. The study theoretically examined statistical problems induced when OLS estimation was applied with the time series cross section data. Then both the OLS regression and time series cross section regression (TSCS regression) were applied to the same empirical da. Finally, the difference in parameters between the two estimations were explained through residual analysis.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.695-702
• /
• 2008

In this paper, a new numerical method is proposed to analyze near-field sonar cross section of acoustically large-sized underwater targets such as submarines. A near-field problem is converted to a far-field problem using a spherical projection method with respect to the objective target. Then, sonar cross section is calculated with a physical optics well established in far-field acoustic wave scattering problems. The analysis results of a square flat plate compared with those obtained by other method show the accuracy of the proposed method. Moreover, it is noted that the sonar cross section is varied with respect to the targeting point as well as the range. Finally, numerical analysis results of real-like underwater target such as a submarine pressure hull are discussed.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.444-450
• /
• 2024

Based on multiple measurements of ionization loss, the Time Projection Chamber (TPC) combines strong tracking ability with particle identification ability in a large momentum range, which is an important advantage of TPC detection technology over traditional ionization measurement technology. According to these two characteristics of TPC, applying it to the measurement of fission cross-section can greatly improve the measurement accuracy. During the measurement of the fission cross-section, the number of target nuclei is required to be accurately measured. So this paper introduces a method for measuring the number of ²³⁵U target nuclei using a fission TPC system. The measurement result agrees with the reference value, and relative error is around 1 %.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.710-717
• /
• 2015

Projection stereolithography is an additive manufacturing method that uses beam projection to cure the photo-reactive resin used. The light source of a cross-section layer-form illuminates photo-curable resin for building a three-dimensional (3D) model. This method has high accuracy and a fast molding speed because the processing unit is a face instead of a dot. This study describes a Scalable Projection Stereolithography 3D Printing System for improving the accuracy of the stereolithography. In a conventional projection 3D printer, when printing a small sized model, many pixels are not used in the projection or curing. The proposed system solves this problem through an optical adjustment, and keeps using the original image as possible as filling the whole projection area. The experimental verification shows that the proposed system can maintain the highest level of precision regardless of the output size.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권12호
• /
• pp.1239-1246
• /
• 2003

대상 물체의 3차원 모델을 구축하기 위해서는 여러 시점에서 측정된 거리정보 데이타들을 하나의 좌표계로 통합하는 정합(registration) 과정이 필수적이다. 3차원 데이타의 정합을 위해 가장 널리 사용되는 ICP(Iterative Closest Point) 알고리즘은 거리정보 데이타 간에 겹치는 영역 또는 일치점 등에 대한 사전 정보가 필요하다. 본 논문에서는 임의의 시점에서 측정된 데이타를 반복적인 방법에 의해 자동으로 정합하는 개선된 ICP 방법이 제안된다. 3차원 데이타가 거리정보 영상으로 맺히는 관계를 나타내는 센서 사영조건(projection constraint), 데이타의 공분산(covariance) 행렬, 교차(cross) 사영 등을 이용하여 정합과정을 자동화하였으며, 유저의 개입이나 3차원 기계 보조 장치 등을 사용하는 별도의 초기값 측정 없이 3차원 모델을 정확하게 구성할 수 있다. 다양한 거리정보 데이타에 대한 실험을 통해 제안된 방법의 우수한 성능을 확인하였다.

• 한국정보통신학회논문지
• /
• 제5권6호
• /
• pp.1163-1168
• /
• 2001

거리 계측 시스템은 물체까지의 거리를 삼차원 좌표계에서 측정하는 장치이다. 군용 장비나 건설, 항해, 검사 조립, 로봇 비전 등에 널리 사용되는 무접촉식 원격 거리 계측(ranging) 시스템은 자동화 응용에 매우 중요하다. 계측 방식은 active와 passive방식으로 구분되는데, active방식은 laser나 microwave, 초음파 등의 time of flight를 이용하거나 레이저 조사(illumination)에 대한 카메라 영상을 해석하는 등의 다양한 방식이 있으나 장치가 복잡하며, passive 방식은 stereo camera의 양안영상을 이용하거나 focus특성을 이용하는 방식 등이 있으나 대부분 연산시간이 많이 요구된다. 본 연구에서는 수동식 스테레오 카메라에서 양안시차를 산출하여 triangulation으로 목표전의 거리를 측정하는 방식에서, 연산 시간이 많이 소요되는 과정을 고속으로 처리하는 새로운 방식을 제안하였다. 즉, 목표점에서의 양안 edge 영상을 구하고, 이 영상의 projection profile을 cross correlation하여, 시차를 고속으로 산출해 거리를 구하는 알고리즘을 제안하였으며, 이 방식의 효율성을 실험 결과를 통하여 보였다.

• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.878-884
• /
• 2013

Stereolithography can be classified into two main categories according to the cross-sectional shape: scanning type and projection type. Projection stereolithography has significant advantages when making a layer using a single patterned beam, and results in improved speed and accuracy. To implement relatively low-cost projection stereolithography, we developed a system using a commercially available resin, which cures on exposure to visible light. The optimum photoinitiator was investigated, as well as the mixing ratio. The viscosity, shrinkage, curing depth and tensile strength were evaluated through several experiments on fabricated three-dimensional structures, and thus an optimal resin selection system was developed.

• 대한전자공학회논문지TC
• /
• 제43권12호
• /
• pp.24-30
• /
• 2006

본 논문에서는 다중 안테나를 갖는 위성항법시스템 (GNSS) 수신기에서의 subspace projection을 이용한 전파방해신호 제거와 다중경로 간섭신호 제거에 대한 방법을 기술한다. 우리는 수신기에 들어온 신호를 두 번의 subspace projection을 통해 전파방해신호와 다중경로 간섭신호가 없는 noise subspace로 투영함으로써 GNSS 신호와 noise 만으로 구성된 신호 얻게 되고, 이 신호에 Beamformer를 적용하여 최대의 신호 대 잡음비를 갖는 수신기 출력 신호를 얻게 된다. 컴퓨터 시뮬레이션을 통하여 수신기가 효과적으로 전파방해신호와 다중경로간섭신호를 제거하고 신호 대 잡음비를 최대한으로 증가시킬 수 있음을 보여준다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권5호
• /
• pp.385-391
• /
• 2013

X-ray computed tomography is a very powerful nondestructive technique in safety inspection of historic timber building. But, in field, various testing condition makes it difficult to carry out X-ray CT testing. Limited size in X-ray digital detector is one of the problems. In this study, a pitch pine disk with two holes was used to know how imperfection in X-ray projection affects CT image resolution. Using various number of projections, CT image was reconstructed by filtered back projection method, and then it was investigated how many projection is required to identify the holes in different location. Two artificial holes could be differently detected according to their location in cross section of specimen. One hole in center part of specimen was identified using more than 9 radiographs, but the other one which located in outer part of cross section could not be detected until more than 36 projections were used. Even though there is data missing in outer part of cross section due to limited size of detector, the center part of CT image could be reconstructed well and the resolution of outer part became higher with increase of the number of projections. For field application, the number of projections for CT image reconstruction needs to be decided with consideration of another nondestructive testing and the location of interest.