• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.3
• /
• pp.366-373
• /
• 2005

This study was carried out to investigate the self-reported health and eating habit of the elite female adolescent athletes in Incheon. The subjects were 102 elite female athletes of middle and high schools located in Inchon. A self-administered Questionnaire was used for this cross-sectional survey. Statistical analysis by two-way ANOVA was performed to discriminate between the main effects of age (as middle and high school athletes) and sports type, and their interaction. As use of nutritional supplements, 35.8% of the total subjects took vitamin and iron supplements and 62.5% of field and track athletes took vitamin and iron supplements. While mental stress related to exercise was much in fencing ＆gt; shooting ＆gt; field and track ＆gt; swimming athletes, physical burden during training was higher in swimming ＆gt; field and track ＆gt; fencing ＆gt; shooting athletes. More than half of the subjects showed irregular menstrual cycle. As the most severe problem of eating habit, they reported skipping meal ＆gt; overeating ＆gt; prejudiced meal ＆gt; preference to salty and spicy foods. More than half of the subjects skipped meal over three times per week. Fencing and shooting athletes showed very significantly higher frequency of skipping meal and more irregular breakfast time compared to those of other sport types. As for snack, they ate cookies, carbonated drink, chocolate, candy ＆gt; milk, yogurt, ice cream ＆gt; cake, bread, rice cake ＆gt; fried noodle ＆gt; hamburger, pizza. Therefore, nutritional counseling and education by sport type are necessary for health and good eating habit of these elite female adolescent athletes.

• Sijohaknonchong
• /
• v.42
• /
• pp.151-185
• /
• 2015

The purpose of this study is to reveal the aspects of "Children" in Saseolsijo and its historical implication in Korean Classical Poetry. What was discussed can be summarized as follows: There are two types of children in Saseolsijo, one is silent, and the other is speaking. The silent child characteristics are such as being called and addressed by the poetic narrator, customary audience, passive attitude, etc. The speaking child characteristics are speaking subject, active attitude as sign of modernity. These phenomenon simply expose the differences of aesthetic order. The silent children is mainly to be utilized as a device to maximize the lyricism of the text as an ideologically product by the inner request of the poetic narrator and show identification discourse. The speaking child, gives the dynamics in text by heterogeneous discourse and informs aesthetic distance between "the reader and the text" as well and show distance discourse. These fragments from Saseolsijo's children are also found in previous genres. In the case of Hyangga, 'children' speak for solving others' desire but are targeted by poetic narrator as well. In the case of Goryosokyo, 'children' show activity and efforts to break forced silence by the poetic narrator through voluntary speaking. In Sijo's case, unlike other genres, some literary works show contents about disciplining children and the growth of children. However mostly targeted children by the poetic narrator are predominantly appeared from the discourse perspective. These aspects of children in previous genres including some of works in Saseolsijo are mainly associated with the appearance of medieval children. Unlike these, the new aspects of Saseolsijo's children show the cross-section of the signs of transition contemporary, from medieval to modern. Even if there are few literary works in these, speaking children with activity reveals novelty over medieval-imposed 'child-ness' by showing 'self', 'individual desire' strongly. This novelty is far from infants of the modern concept as naive and innocent children but these children are noted in that they show a part of modernity through various voices in the text, the comic(laughter), multiple point views, etc.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.2
• /
• pp.46-67
• /
• 2014

The Dinosaur track-bearing deposits recently found at Bangudae Petroglyph site in Ulju (National Treasure No. 285) have been studied in the aspects of sedimentology, paleoenvironments, and significance in natural history. The dinosaur tracks occur in the Daegu Formation (late Early Cretaceous), and over 80 footprints including 43 ornithopod footprints, 36 sauropod footprints, and 2 theropod footprints are preserved in this tracksite. The track-bearing deposits consist of irregularly interlaminated siltstone and mudstone, calcareous sandy to silty mudstone, thin-bedded tuffaceous sandstone, planar- to cross-laminated sandstone, and thin- to medium-bedded graded sandstone, and they are interpreted to be sheetflood deposits on an alluvial plain. Diverse types of ripples and mudcracks, rainprints, and invertebrate trace fossils are observed in these deposits, and the crest-lines of wave ripples do not show preferred orientation. Dinosaur footprints occur as true prints, underprints, overtracks, and casts on the bedding surfaces, and the orientation of trackways are scattered. It is interpreted that paleoclimatic condition of the track-bearing deposits were semiarid with alternation of wetting and drying periods, and that dinosaurs frequented small and shallow ponds during wetting periods and recorded their tracks on an alluvial plain. The frequent occurrence of dinosaur tracks in study area indicates that the Cretaceous deposits around Daegokcheon Stream are very useful sedimentological and paleontological records to understand the paleoecology and paleoenvironments during the dinosaur age in Korean Peninsula. Consequently the dinosaur track-bearing deposits around Daegokcheon Stream should be further studied in sedimentary geology and paleontology in order to enhance cultural heritage value of the Petroglyphs of Bangudae Terrace as the World Heritage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.1-8
• /
• 1992

This study was conducted to obtain the basic information on salt-tolerance of rice cultivars in relations with growth retardation and cation content. As the salt-level increased, less retardation in plant height and dry weight were shown in salt-tolerant than salt-susceptible rice cultivars. Salt tolerant cultivars showed lower N $a^{+}$ and higher $K^{+}$ content and lower N $a^{+}$ / $K^{+}$ ratio at each salt-levels than salt-susceptible ones, while there were no significant differences in $Ca^{++}$ and $Mg^{++}$ content. At the tillering stage, the plant height and dry weight of the salt-treated plots were significantly correlated with N $a^{+}$ and $K^{+}$ content and N $a^{+}$ / $K^{+}$ ratio, implying that N $a^{+}$ and $K^{+}$ content could be an indicator of salt-tolerance of a rice cultivar. There were no tiller-depending differences in cation content in all cultivars. N $a^{+}$ content and N $a^{+}$ / $K^{+}$ ratio in leaves were lower at the top and higher at the bottom. In three $F_1$ hybrids between salt tolerant parent Pokkali and three salt susceptible parents, plant height, dry weight, $K^{+}$ content and N $a^{+}$ / $K^{+}$ ratio were similar to those of Pokkali parent, while N $a^{+}$ content was intermediate of the parents. So, it seemed that salt tolerance is dominant over salt susceptibility. In $F_2$ of Pokkali/wx817 cross, genetic segregation of plant height, dry weight, $K^{+}$ content and N $a^{+}$ / $K^{+}$ ratio varied continuously and was biased onto Pokkali side, while that of N $a^{+}$ content showed normal distribution with intermediate mode. Broad-sense heritability of the characters ranged from 0. 604 to 0. 811. Genotypic and phenotypic correlation coefficients among them were relatively high.fficients among them were relatively high.h.h.

• Asia Marketing Journal
• /
• v.7 no.3
• /
• pp.53-76
• /
• 2005

With rapid technological and market change, new product development (NPD) complexity is a significant issue that organizations continually face in their development projects. There are numerous factors, which cause development projects to become increasingly costly & complex. A product is more likely to be successfully developed and marketed when the complexity inherent in NPD projects is clearly understood and carefully managed. Based upon the previous studies, this study examines the nature and importance of complexity in developing new products and then identifies several issues in managing complexity. Issues considered include: definition of complexity : consequences of complexity; and methods for managing complexity in NPD projects. To achieve high performance in managing complexity in development projects, these issues need to be addressed, for example: A. Complexity inherent in NPD projects is multi-faceted and multidimensional. What factors need to be considered in defining and/or measuring complexity in a development project? For example, is it sufficient if complexity is defined only from a technological perspective, or is it more desirable to consider the entire array of complexity sources which NPD teams with different functions (e.g., marketing, R&D, manufacturing, etc.) face in the development process? Moreover, is it sufficient if complexity is measured only once during a development project, or is it more effective and useful to trace complexity changes over the entire development life cycle? B. Complexity inherent in a project can have negative as well as positive influences on NPD performance. Thus, which complexity impacts are usually considered negative and which are positive? Project complexity also can affect the entire organization. Any complexity could be better assessed in broader and longer perspective. What are some ways in which the long-term impact of complexity on an organization can be assessed and managed? C. Based upon previous studies, several approaches for managing complexity are derived. What are the weaknesses & strengths of each approach? Is there a desirable hierarchy or order among these approaches when more than one approach is used? Are there differences in the outcomes according to industry and product types (incremental or radical)? Answers to these and other questions can help organizations effectively manage the complexity inherent in most development projects. Complexity is worthy of additional attention from researchers and practitioners alike. Large-scale empirical investigations, jointly conducted by researchers and practitioners, will help gain useful insights into understanding and managing complexity. Those organizations that can accurately identify, assess, and manage the complexity inherent in projects are likely to gain important competitive advantages.

• Journal of Biomedical Engineering Research
• /
• v.6 no.2
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• Bulletin of the Korean Space Science Society
• /
• 1993.10a
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Journal of Nutrition and Health
• /
• v.41 no.1
• /
• pp.65-76
• /
• 2008

This study was performed to identify association between nutritional status and health risks of the elderly. This was a cross-sectional study involving low income elderly women in Gwangju, Korea (${\geq}$65y, n = 92). Socio-demographics, life style characteristics, health conditions, dietary intakes based on 24h-recall method, anthropometric measures, and clinical biochemistry parameters were examined. Anthropometric and clinical parameters included wt, ht, waist, hip, body protein, body fat, abdominal fat, total cholesterol, HDL-cholesterol, triglyceride, total protein, albumin, hemoglobin, hematocrit, fasting blood glucose, ferritin, IL-2, IL-6, TNF-${\alpha}$, CRP, TAS, TBARS, systolic blood pressure, and diastolic blood pressure. The subjects were divided into three groups based on age (65-74y, 75-84y, 85y${\leq}$) and were divided into two groups according to the sum of the Nutrition Screening Initiative (NSI) checklist score (adequate nutritional status, NSI score ${\leq}$3; at risk of malnutrition, NSI score >3). Mean and frequency of variables were estimated. Analysis of Variance, Tukey test, Chi-square test, and Multiple linear regression analyses were performed. Mean BMI and body fat were 25.1 $kg/m^2$ and 40.0%, respectively. However, for over 80% of subjects, the intakes of energy, fiber, thiamin, riboflavin, niacin, folate, Ca, K, and Zn were less than the Korean DRI (EAR or AI). The subjects who had lower NSI score tended to have better health status, eat meals frequently, have less depression, and exercise regularly. The subjects who had higher NSI score tended to have tooth problems, to eat alone most of time, and to be physically unable to cook or feed. Serum IL-6 and TNF-${\alpha}$ were significantly related with nutritional status which suggested higher tendency of inflammatory response. Serum IL-2, TAS, and glucose were significantly correlated with body fat (%) or abdominal fat (%). These results suggest that improving the nutritional status, increasing regular exercise, maintaining normal weight are beneficial to health care of low income elderly women.

• Journal of Hospice and Palliative Care
• /
• v.6 no.1
• /
• pp.22-33
• /
• 2003

Purpose : The purpose of this study was to evaluate the present status of patients' satisfaction and the reasons for any satisfaction or dissatisfaction in cancer pain management Methods : A cross-sectional survey was used to obtain the feedback about pain management. The results of the survey were collected from 59 in- or out-patient who had cancer treatment at two of the teaching hospitals in Seoul from July, 2002 to November, 2002. The data was obtained by a structured questionnaire based on the American Cancer Society Patient Outcome Questionnaire(APS-POQ) and other previous research. The clinical information for all patients were compiled by reviewing their medical records. Resuts : 1) The subjects' mean score of the worst pain was 6.77, the average pain score was 3.80, and the pain score after management was 2.93 for the past 24 hours. The mean score of total pain interference was $25.03{\pm}12.82$. Many of the subjects had false beliefs about pain such as 'the experience of pain is a sign that the illness has gotten worse', 'pain medicine should be 'saved' in case the pain gets worse' and 'people get addicted to pain medicine easily'. 2) 66.1% of the subjects were properly medicated with analgesics. 33.9% of the subjects reported use of various methods in controlling pain other than the prescribed medication. Only 33.9% of the subjects had a chance to be educated about pain management by doctors or nurses. 3) The mean score of patients' satisfaction with pain management was $4.19{\pm}1.14$. 72.9% of the subjects answered 'satisfied' with pain management. The reasons for dissatisfaction were 'the pain was not relieved even after the pain management', 'I was not quickly and promptly treated when I complained of pain', 'doctors and nurses didn't pay much attention to my complaints of pain.', and 'there was no appropriate information given on the methods of administration, effect duration and side effects of pain medicine.' The reasons for satisfaction were: 'the pain was relieved after the pain management.', 'doctors and nurses quickly and promptly controlled my pain.', 'doctors and nurses paid enough attention to my complaints of pain.' and 'trust in my physician'. 4) In pain severity or pain interference, no significant difference was found between the satisfied group and dissatisfied group. On the belief 'good patients avoid talking about pain', a significant difference was found between the satisfied group and dissatisfied group. Conclusions : The patients' satisfaction with cancer pain management has increased over the years but still about 30% of patients reported to be 'not satisfied' for various reasons. The results of this study suggest that patients' education should be done to improve satisfaction in the pain management program.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.3
• /
• pp.277-294
• /
• 1995

Background: The prevalence of tuberculosis in Korea decreased remarkably for the past 30 years, while the incidence of disease caused by mycobacteria other than tuberculosis is unknown. Korean Academy of Tuberculosis and Respiratory Diseases performed national survey to estimate the incidence of mycobacterial diseases other than tuberculosis in Korea. We analyzed the clinical data of confirmed cases for the practice of primary care physicians and pulmonary specialists. Methods: The period of study was from January 1981 to October 1994. We collected the data retrospectively by correspondence with physicians in the hospitals that referred the specimens to Korean Institute of Tuberculosis, The Korean National Tuberculosis Association for the detection of mycobacteria other than tuberculosis. In confirmed cases, we obtained the records for clinical, laboratory and radiological findings in detail using protocols. Results: 1) Mycobacterial diseases other than tuberculosis were confirmed that 1 case was in 1981, 2 cases in 1982, 4 cases in 1983, 2 cases in 1984, 5 cases in 1985, 1 case in 1986, 3 cases in 1987, 1 case in 1988, 6 cases in 1989, 9 cases in 1990, 14 cases in 1990, 10 cases in 1992, 4 cases in 1993, and 96 cases in 1994. Cases since 1990 were 133 cases(84.2%) of a total. 2) Fifty seven percent of patients were in the age group of over 60 years. The ratio of male to female patients was 2.6:1. 3) The distribution of hospitals in Korea showed that 61 cases(38.6%) were referred from Double Cross Clinic, 42 cases(26.6%) from health centers, 21 cases(13.3%) from tertiary referral hospitals, 15 cases(9.5%) from secondary referral hospitals, and 10 cases(6.3%) from primary care hospitals. The area distribution in Korea revealed that 98 cases(62%) were in Seoul, 17 cases(10.8%) in Gyeongsangbuk-do, 12 cases(7.6%) in Kyongki-do, 8 cases(5.1%) in Chungchongnam-do, each 5 cases(3.2%) in Gyeongsangnam-do and Chungchongbuk-do, 6 cases(3.8%) in other areas. 4) In the species of isolated mycobacteria other than tuberculosis, M. avium-intracellulare was found in 104 cases(65.2%), M. fortuitum in 20 cases(12.7%), M. chelonae in 15 cases(9.5%), M. gordonae in 7 cases(4.4%), M. terrae in 5 cases(3.2%), M. scrofulaceum in 3 cases(1.9%), M. kansasii and M. szulgai in each 2 cases(1.3%), and M. avium-intracellulare coexisting with M. terrae in 1 case(0.6%). 5) In pre-existing pulmonary diseases, pulmonary tuberculosis was 113 cases(71.5%), bronchiectasis 6 cases(3.8%), chronic bronchitis 10 cases(6.3%), and pulmonary fibrosis 6 cases(3.8%). The timing of diagnosis as having pulmonary tuberculosis was within 1 year in 7 cases(6.2%), 2~5 years ago in 32 cases(28.3%), 6~10 years ago in 29 cases(25.7%), 11~15 years ago in 16 cases(14.2%), 16~20 years ago in 15 cases (13.3%), and 20 years ago in 14 cases(12.4%). Duration of anti-tuberculous treatment was within 3 months in 6 cases(5.3%), 4~6 months in 17 cases(15%), 7~9 months in 16 cases(14.2%), 10~12 months in 11 cases(9.7%), 1~2 years in 21 cases(18.6%), and over 2 years in 8 cases(7.1%). The results of treatment were cure in 44 cases(27.9%) and failure in 25 cases(15.8%). 6) Associated extra-pulmonary diseases were chronic liver disease coexisting with chronic renal failure in 1 case(0.6%), diabetes mellitus in 9 cases(5.7%), cardiovascular diseases in 2 cases(1.3%), long-term therapy with steroid in 2 cases(1.3%) and chronic liver disease, chronic renal failure, colitis and pneumoconiosis in each 1 case(0.6%). 7) The clinical presentations of mycobacterial diseases other than tuberculosis were 86 cases (54.4%) of chronic pulmonary infections, 1 case(0.6%) of cervical or other site lymphadenitis, 3 cases(1.9%) of endobronchial tuberculosis, and 1 case(0.6%) of intestinal tuberculosis. 8) The symptoms of patients were cough(62%), sputum(61.4%), dyspnea(30.4%), hemoptysis or blood-tinged sputum(20.9%), weight loss(13.3%), fever(6.3%), and others(4.4%). 9) Smear negative with culture negative cases were 24 cases(15.2%) in first examination, 27 cases(17.1%) in second one, 22 cases(13.9%) in third one, and 17 cases(10.8%) in fourth one. Smear negative with culture positive cases were 59 cases(37.3%) in first examination, 36 cases (22.8%) in second one, 24 cases(15.2%) in third one, and 23 cases(14.6%) in fourth one. Smear positive with culture negative cases were 1 case(0.6%) in first examination, 4 cases(2.5%) in second one, 1 case (0.6%) in third one, and 2 cases(1.3%) in fourth one. Smear positive with culture positive cases were 48 cases(30.4%) in first examination, 34 cases(21.5%) in second one, 34 cases(21.5%) in third one, and 22 cases(13.9%) in fourth one. 10) The specimens isolated mycobacteria other than tuberculosis were sputum in 143 cases (90.5%), sputum and bronchial washing in 4 cases(2.5%), bronchial washing in 1 case(0.6%). 11) Drug resistance against all species of mycobacteria other than tuberculosis were that INH was 62%, EMB 55.7%, RMP 52.5%, PZA 34.8%, OFX 29.1%, SM 36.7%, KM 27.2%, TUM 24.1%, CS 23.4%, TH 34.2%, and PAS 44.9%. Drug resistance against M. avium-intracellulare were that INH was 62.5%, EMB 59.6%, RMP 51.9%, PZA 29.8%, OFX 33.7%, SM 30.8%, KM 20.2%, TUM 17.3%, CS 14.4%, TH 31.7%, and PAS 38.5%. Drug resistance against M. chelonae were that INH was 66.7%, EMB 66.7%, RMP 66.7%, PZA 40%, OFX 26.7%, SM 66.7%, KM 53.3%, TUM 53.3%, CS 60%, TH 53.3%, and PAS 66.7%. Drug resistance against M. fortuitum were that INH was 65%, EMB 55%, RMP 65%, PZA 50%, OFX 25%, SM 55%, KM 45%, TUM 55%, CS 65%, TH 45%, and PAS 60%. 12) The activities of disease on chest roentgenogram showed that no active disease was 7 cases(4.4%), mild 20 cases(12.7%), moderate 67 cases(42.4%), and severe 47 cases(29.8%). Cavities were found in 43 cases(27.2%) and pleurisy in 18 cases(11.4%). 13) Treatment of mycobacterial diseases other than tuberculosis was done in 129 cases(81.7%). In cases treated with the first line anti-tuberculous drugs, combination chemotherapy including INH and RMP was done in 86 cases(66.7%), INH or RMP in 30 cases(23.3%), and not including INH and RMP in 9 cases(7%). In 65 cases treated with the second line anti-tuberculous drugs, combination chemotherapy including below 2 drugs were in 2 cases(3.1%), 3 drugs in 15 cases(23.1%), 4 drugs in 20 cases(30.8%), 5 drugs in 9 cases(13.8%), and over 6 drugs in 19 cases (29.2%). The results of treatment were improvement in 36 cases(27.9%), no interval changes in 65 cases(50.4%), aggravation in 4 cases(3.1%), and death in 4 cases(3.1%). In improved 36 cases, 34 cases(94.4%) attained negative conversion of mycobacteria other than tuberculosis on cultures. The timing in attaining negative conversion on cultures was within 1 month in 2 cases(1.3%), within 3 months in 11 cases(7%), within 6 months in 14 eases(8.9%), within 1 year in 2 cases(1.3%) and over 1 year in 1 case(0.6%). Conclusion: Clinical, laboratory and radiological findings of mycobacterial diseases other than tuberculosis were summarized. This collected datas will assist in the more detection of mycobacterial diseases other than tuberculosis in Korea in near future.