• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.335-338
• /
• 2005

This study was performed to verify that the impact vibration test on the damaged concrete pier can be adopted for assessment of the bridge substructure integrity. Using the experimental modal analysis, the dynamic property changes of the concrete pier are investigated according to the damage levels which are modeled by the loss of cross section area of the pier body. As a result of the impact vibration test, it is found that the natural frequency of the bridge substructure is reduced due to the damage on the pier such as loss of cross section area, and the natural frequency can be used for assessment of the integrity index.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.75-84
• /
• 2019

This study was a cross-sectional descriptive research that investigate the level of addiction and analyzed the impact of computer game addiction from 20 to 30 years old on communication capabilities. The purpose of this study was to investigate the level of game addiction according to general characteristics and to confirm the effect of computer game addiction on communication ability. There were a total of 220 participants in the study. This survey for this study was a self-reporting questionnaire, research tools for this study were developed by Lee (2000) using game addiction and Communication ability developed by Frits et al., (1999). Data analysis was analyzed with frequency analysis, t-test, ANOVA, and Regression using SPSS 18.0. As a result of analysis, the difference between game addiction and communication ability by gender was appeared to be different under statistical significance levels: game addiction (t=-.9.2, p<0.01), subcomponents of communication ability, concentration (t=7.20, p<0.01), understanding (t=6.13, p<0.01), response (t=6.22, p<0.01), memory (t=2.88, p<0.05). The highest level of game addiction was appeared between 28 and 30 years old under statistical significance (p<0.01). Finally computer game addiction affects understanding, a subcomponent of communication capabilities.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.47-58
• /
• 2014

This study explores methods for modeling the foundation-seabed interaction needed for the load analysis of an offshore wind energy system. It comprises the comparison study of foundation design load analyses for NREL 5 MW turbine according to various soil-foundation interaction models by conducting the load analysis with GH-Bladed, analysis software for offshore wind energy systems. Furthermore, the results of the aforementioned load analysis were applied to foundation analysis software called L-Pile to conduct a safety review of the foundation cross-section design. Differences in the cross-section of a monopile foundation were observed based on the results of the fixed model, winkler spring and coupled spring models, and the analysis of design load cases, including DLC 1.3, DLC 6.1a, and DLC 6.2a. Consequently, under all design load conditions, the diameter and thickness of the monopile foundation cross-section were found to be 7 m and 80 mm, respectively, using the fixed and coupled spring models; the results of the analysis conducted using the winkler spring model showed that the diameter and thickness of the monopile foundation cross-section were 5 m and 60 mm, respectively. The study found that the soil-foundation interaction modeling method had a significant impact on the load analysis results, which determined the cross-section of a foundation. Based on this study, it is anticipated that designing an offshore wind energy system foundation taking the above impact into account would reduce the possibility of a conservative or unconservative design of the foundation.

• Journal of Information Technology Applications and Management
• /
• v.27 no.6
• /
• pp.53-73
• /
• 2020

Many prior studies have been conducted that positive reviews increase the intention to purchase. However, there are very few papers that have studied the impact of review search on purchase satisfaction. It is meaningful to study the impact of review search on purchase satisfaction as it can lead the business successfully by inducing repurchase. There is also no study of how review search have different effects on purchase satisfaction among countries. Given the growing number of cross-border e-commerce, we believe that the need for research is high because identifying these differences between countries can have a very important impact on a company's successful overseas expansion. Therefore, in this study, the impact of positive and negative review search on purchase satisfaction and the national impact were set up as a research model. In order to verify this research model, the survey was distributed to those who experienced online purchase in Korea and China, and a total of 234 copies were collected, including 125 copies in Korea, 109 copies in China, and the research model was verified using Smart-PLS structural equation analysis tools. First, positive review search has been shown to positively affect purchase satisfaction. Second, it has been shown that negative review search also has a positive effect on purchase satisfaction. Third, the impact of positive and negative review search on purchase satisfaction was different between Korea and China. While Korea is more aggressive in review search than China due to its high tendency to avoid uncertainty, China is less likely to avoid uncertainty than Korea and is more likely to rely on brand familiarity. Therefore, according to the uncertainty avoidance moderation effect the impact of positive and negative review search on purchase satisfaction was higher in Korea than in China. In this study, Shopping mall managers need to take strategic measures to maximize shopping mall performance by recognizing positive aspects of negative review search on purchase satisfaction. Companies and managers in Korea and China can establish strategies to promote product sales when companies enter the global market.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.945-950
• /
• 2001

Floor impact noise has been evaluated by investigating the temporal and spectral characteristics of the noise. The noises generated by different impactors were analyzed to find out whether there is any correlation with the factors of ACF /IACF (Autocorrelation Function/Inter-aural Cross-correlation Function) [1] and Zwicker parameters [2]. Experiments were undertaken to compare the objective and subjective parameters of the floor impact noises generated by a bang/tapping machine, a rubber ball [3], and a walker. As a result, it was found that $\phi$ (0) and IACC extracted from ACF/IACF, and Loudness, Unbiased Annoyance from Zwicker parameters showed high correlation with subjective evaluations of loudness concerning floor impact noises. In addition, it was revealed that jumping is similar to the ball.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1407-1424
• /
• 2024

In Pressurized Water Reactors, most of the failed fuel rods are often observed at the periphery of the fuel assembly, especially near the core baffle. The rod vibration-induced fretting wear is a significant failure mechanism strongly correlated with the coolant and support conditions. This paper presents a coupled vibration model of double-rod to predict the grid-to-rod fretting (GTRF) wear. A motion-dependent fluid force model is used to simulate the coolant cross flow, the gap constraints with asymmetric stiffness between spring and dimple on the vibration form, and the fretting wear are discussed. The results show the effect of the coupled vibration on the deterioration of wear, providing a sound theoretical explanation of some failure phenomena observed in the previous experiment. Exploratively, we analyze the impact of the baffle jet on the GTRF wear, which indicates that the high-velocity cross-flow will significantly affect the vibration forms while sharply changing the wear behavior.

• Advances in concrete construction
• /
• v.15 no.4
• /
• pp.215-228
• /
• 2023

The vibrational behavior of nanoelements is critical in determining how a nanostructure behaves. However, combining vibrational analysis with stability analysis allows for a more comprehensive knowledge of a structure's behavior. As a result, the goal of this research is to characterize the behavior of nonlocal nanocyndrical beams with uniform and nonuniform cross sections. The nonuniformity of the beams is determined by three distinct section functions, namely linear, convex, and exponential functions, with the length and mass of the beams being identical. For completely clamped, fully pinned, and cantilever boundary conditions, Eringen's nonlocal theory is combined with the Timoshenko beam model. The extended differential quadrature technique was used to solve the governing equations in this research. In contrast to the other boundary conditions, the findings of this research reveal that the nonlocal impact has the opposite effect on the frequency of the uniform cantilever nanobeam. Furthermore, since the mass of the materials employed in these nanobeams is designed to remain the same, the findings may be utilized to help improve the frequency and buckling stress of a resonator without requiring additional material, which is a cost-effective benefit.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.9
• /
• pp.1615-1626
• /
• 1992

In this study, vibrations and resulting acoustic radiations from an elastic beam impacted by a steel ball were studied theoretically and experimentally. First the transverse vibrations of free-free elastic beams are analysed with modal analysis technique. The impact forces are modeled with the Hertz's theory and the contanct duration is compared with the measured values. Also the calculated beam vibrations are verified with the experimental results. Then the acoustic radiations due to the beam vibration are studied numberically and experimentally. The acousticpressure is calculated assuming the beam has an elliptical cross-section. The predicted acoustic pressure is compared with the measured value. It was found that both the predicted beamvibrations using the Hertz's theory and the estimated acoustic pressure under the assumption of an elliptical cross- section are in very good agreements with the measured values.

• Advanced Composite Materials
• /
• v.16 no.1
• /
• pp.45-61
• /
• 2007

This paper describes a damage accumulation mechanism in cross-ply CFRP laminates $[0_2/90_2]_{2S}$ subjected to out-of-plane loading. Drop-weight impact and static indentation tests were carried out, and induced damage was observed by ultrasonic C-scan and an optical microscope. Both tests gave essentially the same results for damage modes, sizes, and load-deformation history. First, a crack occurred in the bottom $0^{\circ}$ layer accompanying some delamination along the crack caused by bending stress. Then, transverse cracks occurred in the middle $90^{\circ}$ layer with decreasing contact force between the specimen and the indenter. Measured local strains near the impact point showed that the stress state changed from a bending dominant state to an in-plane tensile dominant state. A cohesive interface element was used to simulate the propagation of multiple delaminations and transverse cracks under static indentation. Two types of analytical models are considered, one with multiple delaminations and the other with both multiple delaminations and transverse cracks. The damage obtained for the model with only multiple delaminations was quite different from that obtained from the experiment. However, the results obtained from the model with both delaminations and transverse cracks well explain the characteristics of the damage obtained in the experiment. The existence of the transverse cracks is essential to form the characteristic impact damage.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.355-364
• /
• 2021

The main objective of this study is to examine the interactive effect of technology spillover channels on business efficiency within the case study of manufacturing industry of Vietnam during the period from 2012 to 2018. The research model was developed with business efficiency as dependent variable and the relevant factors affecting the technology spillover capacity as independent variables. With a sample of 2,776 cross-sectional enterprises, panel data analysis approach was adopted to estimate the impact of technology spillover issue. Different spillover channels were also included in the analysis to enhance the empirical result. The study reveals that technology spillovers positively influence manufacturing business efficiency, in which horizontal spillover channel produces negative impact and vertical spillover channel, creates positive impact. Several factors that negatively affect the technology spillover capacity of businesses could be mentioned such as limited skills and experiences of workers, methods of implementing R&D, and the existence of FDI enterprises. Meanwhile, the rise of other factors related to joint-venture activities can help to increase the technology spillover capacity of businesses. In addition, skill and experience transfer makes a partial impact since this variable only positively affect the vertical spillover channel and provide no evidence of impact regarding horizontal spillover channel model.