• Journal of the Korean Wood Science and Technology
• /
• 제43권1호
• /
• pp.52-59
• /
• 2015

소경 참나무 횡절목을 열처리하여 브로치 등 악세사리용 소재로 개발하였다. 그러나 국산참나무는 난건조수종으로 특히 횡절 원판을 건조결함없이 건조하기 어렵다. 소경 굴참나무(Quercus variabilis)에서 얻은 원판(섬유방향 길이 7 mm)을 여름과 가을에 강제송풍천연건조하면서 여러 조건에 따른 건조수율을 조사하였다. 같은 조건에서 가을에 건조한 시편의 최종 평균함수율이 여름에 건조한 시편의 평균함수율보다 낮았다. 두 계절 모두 큰 직경의 시편은 풍속에 따른 차이를 보이지 않았으나 작은 직경의 시편은 풍속이 높았을 때 최종 평균함수율이 약간 낮았다. 두 계절 모두 직경이 큰 시편의 할렬 발생빈도가 직경이 작은 시편보다 높았는데 가을에는 2배 정도인데 반해 여름에는 4배가 넘었다. 여름에 낮은 풍속에서 건조한 큰 직경 시편의 할렬 발생빈도가 높은 이유는 여름의 높은 습도와 낮은 풍속으로 반복적인 수분 응축과 증발이 일어났기 때문으로 설명할 수 있다.

• Restorative Dentistry and Endodontics
• /
• 제7권1호
• /
• pp.77-83
• /
• 1981

The purpose of this study was to observe the bonding strength between tooth surface (enamel and dentin) and restorative filling materials which are two composite resins (Clearfil and Concise) and Glass ionomer cement, after etching with 50% phoshoric acid and 37% citric acid. To measure the bonding strength in enamel, the labial surface of upper anterior tooth was cut flatly with using carborundum disk and polished with sand paper disk, and to measure in dentin, the dentin surface was prepared by grinding upper part of posterior tooth horizontally. After washing the tooth surface with water and drying with air blast, the prepared tooth surface was etched. In glass ionomer cement, 50% phosphoric acid and 37% citric acid were used, in Clearfil 40% phosphoric acid was used and in Concise, 50% phosphoric acid and 37% citric acid were used as etchant for 1 minute. After the copper band which is 5 mm in diameter and 5 mm in height was fixed on the prepared surface and each filling material was inserted into the copper band, the hooking loop was inserted into filled material in the copper band before setting to make it easily that the load is applied on the specimen. After all specimens were immersed in water at $37^{\circ}C$ for 1 week, this specimen was placed on the load cell of tensile test apparatus, and specimen was pulled at the cross-head speed of 0.8 mm per minute. The following results were obtained 1) In glass ionomer cement, the bond strength obtained by 37% citric acid was higher than one obtained by 50% phosphoric acid in enamel and dentin surfaces. The bond strength obtained in non-etched surface was much less than one by etchants in enamel and dentin surface. 2) In Clearfil, the bond strength obtained by 40% phosphoric acid was 4 times more than one obtained by non etch ant. 3) In Concise, the bond strength obtained by 50% phosphoric acid was almost same as one obtained by 37% citric acid, and the bond strength obtained by non etch ant was much less than one obtained by etchants.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.159-168
• /
• 1994

The purpose of this study was to evaluate the shear bond strength of the porcelain laminate specimens according to the surface roughness of the cut enamel of human anterior teeth. Flat enamel surfaces were prepared in 30 extracted human anterior teeth with diamond disc which were divided into two groups. Group 1 Coarse enamel surface group prepared with LVS-3 bur. Group 2 Fine enamel surface group prepared with superfine diamond bur. 30 teeth specimens of two group were stored in normal saline during 24 hours. 30 disk - type porcelain laminate specimens with diameter 4mm and thickness 1mm were made and sand - blasted on internal surface which were to cemented on enamel surface. Porcelain laminate specimens were cemented on enamel surface with Choice Veneer System (Bisco Dental, U.S.A) according to manufacture's instructions. All teeth specimens of two groups were manipulated with same method and stored In normal saline before testing. An Universal Testing machine (Model No.UTM-4206,Instron, U.S.A) was used to apply shear loads in the vertical directed, and the force required for separation was recorded with a cross head speed of 3mm/min and 500kg in full scale. The results were as follow ; 1. The mean shear bond strength of coarse surface group was 36.30kg and that of fine surface group was 44.39 kg, but there was no significant difference in breaking strength of two groups(p>0.05).

• 대한치과교정학회지
• /
• 제31권6호
• /
• pp.567-578
• /
• 2001

본 연구는 metal stripper, diamond bur, cross-cut carbide bur을 이용한 기계적 삭제방법과 산을 이용한 화학적 삭제방법 등의 서로 다른 방법으로 삭제된 치아에서 삭제방법에 따른 법랑질 표면조도의 차이를 비교하고, 삭제된 법랑질 표면에 국소적 불소도포와 교정용 전색제를 적용시 치아우식 감수성에 미치는 영향을 알아보기 위해 교정적인 목적으로 발치된 100개의 소구치를 대상으로 주사전자현미경과 레이저 형광법을 이용하여 연구한 바 다음과 같은 결과를 얻었다. 1. 치간삭제방법에 관계없이 인접면 삭제 후 법랑질 표면에 형성된 열구는 세심한 연마과정을 통해서도 제거되지 않았다. 2. 기계적인 치간삭제 방법 중에 가장 활택한 법랑질 표면조도를 보이는 군은 crosscut tungsten carbide bur로 초기삭제 후 sof-$lex^{(r)}$ disk로 연마한 군이었다. 3. 기계적 방법이나 기계적과 화학적 방법을 동반하여 치간 삭제한 모든 군의 치아우식 감수성은 대조군보다 높았다. 그러나 치간삭제 방법에 따른 치아우식 감수성의 차이는 보이지 않았다(p<0.001). 4. APF-gel 이나 sealant을 도포한 군은 치간삭제 후 다른 처치를 하지 않은 군에 비해 치아우식 감수성이 낮았다(p<0.001). 5. APF-gel을 도포한 군이 sealant을 도포한 군보다 치아우식 감수성이 낮았다(P<0.05). 결론적으로, 치간삭제 후 활택한 법랑질 표면을 얻고자 하는 노력에도 불구하고 치간삭제를 실시한 치아는 그 삭제 방법에 관계없이 정상치아에 비해 치아우식 감수성이 높았다. 따라서 치간삭제 후 주기적인 불소의 사용이 치아우식을 예방하는 최선의 방법이라고 생각된다.