• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.491-502
• /
• 1995

핵연료집합체 부수로 유동장에 대한 상세한 정보에 기초해 교차류를 정확히 예측하는 것은 핵연료의 성능을 해석하는데 중요한 요소이다. 본 연구에서는 저-Reynolds 수 k-$\varepsilon$ 난류모형을 채택하여 인접한 두 부수로 사이에 발생하는 교차류를 해석하였다 또한, 2차유동을 정확히 모사하기 위해서 비등방성 대수응력모형을 사용하였다. 이상의 난류 모형은 유한요소법을 통해 해석되었으며 가용한 실험자료와 비교하여 검증하였다. 그리고, 부수로 유동장에 대한 수치해석 결과를 이용하여 횡방향 합력손실계수의 상관식을 구성하였다. 상관식은 교차류를 제공하는 부수로의 축방향 속도에 대한 교차류의 속도비, 제공받는 부수로의 Reynolds 수 그리고 Pitch-to-diameter의 함수로 구성되었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.260-262
• /
• 2003

New Image registration techniques are developed for determining geometric distortions between two images of the same scene. First, the properties of the Fourier transform of a two dimensional function under the affine transformation are given. As a result, techniques for the estimation of the coefficients of the distortion model using the spectral frequency information are developed. Image registration can be achieved by applying the fast Fourier transform (FFT) technique for cross correlation of misregistered imagery to determine spatial distances. The correlation results may be rather broad, making detection of the peak difficult, what can be suppressed by enhancing cross-correlation technique. Yield greatly improves the delectability and high precision of image misregistration.

• ETRI Journal
• /
• 제33권4호
• /
• pp.537-546
• /
• 2011

This paper introduces an automated method for building height recovery through the integration of high-resolution satellite images and digital vector maps. A cross-correlation matching method along the vertical line locus on the Ikonos images was deployed to recover building heights. The rational function models composed of rational polynomial coefficients were utilized to create a stereopair of the epipolar resampled Ikonos images. Building footprints from the digital maps were used for locating the vertical guideline along the building edges. The digital terrain model (DTM) was generated from the contour layer in the digital maps. The terrain height derived from the DTM at each foot of the buildings was used as the starting location for image matching. At a preset incremental value of height along the vertical guidelines derived from vertical line loci, an evaluation process that is based on the cross-correlation matching of the images was carried out to test if the top of the building has reached where maximum correlation occurs. The accuracy of the reconstructed buildings was evaluated by the comparison with manually digitized 3D building data derived from aerial photographs.

• Wind and Structures
• /
• 제2권4호
• /
• pp.253-266
• /
• 1999

This paper presents the effects of free-stream turbulence on streamwise surface pressure fluctuations on two-dimensional rectangular cylinders. Particular attention is given to possible effects of turbulence integral scale on fluctuation and peak pressures. The mean, standard deviation, peak pressure coefficients, spectra and cross-correlation of fluctuating pressures were measured to investigate the nature of the separation and reattachment phenomenon in turbulent flows over a wide range of turbulence intensity and integral scale.

• 대한안전경영과학회지
• /
• 제2권1호
• /
• pp.161-170
• /
• 2000

When designing the parameter on the multiple quality characteristics, there has been a study for optimization of problems, but there has been few former study on the possible conflicting phenomena in consideration of the correlations among the characteristics. To solve the issue on the optimal design for multiple quality characteristics, this study modelled the expected loss function with cross-product terms among the characteristics and derived range of the coefficients of the terms. The model will be used to determine the global optimal design parameters where there exists the conflict among the characteristics, which shows difference in optimal design parameters for the individual characteristics.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권3호
• /
• pp.552-562
• /
• 2001

Measurement of average of heat transfer and friction coefficients were obtained with air flowing through electrically heated ducts having square, rectangular(aspect ration, 5), and triangular cross section for range of surface temperature from $540^{\circ}$to $1780^{\circ}$ R and Reynolds number from 1000 to 330,000. The results indicates that the effect of heat flux on correlations of the average heat transfer and friction coefficients is similar to that obtained for circular tubes in previous investigation and was nearly eliminated by evaluating the physical properties and density of the air a film temperature halfway between the average surface and fluid bulk temperatures, With the Nusselt and Reynolds numbers on the hydraulic diameter of the ducts, the data for the noncircular ducts could be represented by the same equations obtained in the previous investigation for circular tubes. Correlation of the average difference between the surface corner and midwall temperatures for the square duct was in agreement with predicted values from a previous analysis. However, for the rectangular and triangular ducts, the measured corner temperature was greater by approximately 20 and 35 percent, respectively, than the values predicted by analysis.

• 지질공학
• /
• 제29권3호
• /
• pp.303-314
• /
• 2019

얕은 대수층에서 매우 복잡한 함양과정을 거치는 지하수의 함양은 지표와 지하매질의 투수성에 의해 상당한 영향을 받는다. 투수성은 고유투수계수(intrinsic permeability)와 수리전도도(hydraulic conductivity)의 두 가지 개념으로 설명되며 이중 지표매질의 특성만으로 수리전도도를 구하려는 많은 연구가 이루어졌다. 본 연구에서는 경주지역 지하수기초조사에서 수행된 미고결퇴적물의 입도분포곡선과 강우-지하수위 교차상관분석을 토대로 회귀식을 사용하여 강우-지하수위 교차상관분석을 통한 수리전도도 산정식을 제안하고 실제현장에서 수행한 대수성 시험결과와 비교하여 그 적용성을 검토하였다. 그 결과 사질토 기반 충적층대수층에서 Zunker의 경험식에서 산정된 수리전도도와 강우-지하수위 최대 교차상관계수의 상관식이 자연로그형태로 증가하면서 결정계수 0.95 이상으로 매우 큰 상관성을 나타내었고 이 회귀식을 다른 관측공에 적용한 결과 실제 현장에서 수행한 대수성시험 결과와 평균제곱근오차가 2.83%로 나타나 강우-지하수위 모니터링 자료만으로 매우 신뢰할 만한 수리전도도를 추정할 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권9호
• /
• pp.1266-1270
• /
• 2006

This study was carried out to determine the contents of vitamins A and E in carcass fat from Japanese Black and F1 cross cattle, because the method of controlling the amount of vitamin A in feed has been used in the production of expensive beef with high marbling in Japan. We determined the contents of tocopherol and retinol in subcutaneous and perirenal fats for 40 carcasses of Japanese Black and F1 (Holstein${\times}$Japanese Black crossed) cattle that had been sent to market from 10 prefectures. In bovine fat, free ${\alpha}$-tocopherol was present in the greatest amount, the level of ${\gamma}$-tocopherol was about 10% and there was only a trace of ${\delta}$-tocopherol. The means${\pm}$standard deviation of ${\alpha}$-tocopherol content in subcutaneous and perirenal fats were $0.68{\pm}0.33mg/100g$ and $0.54{\pm}0.23mg/100g$, respectively. The means${\pm}$standard deviation of retinol content in subcutaneous and perirenal fats were $2.9{\pm}4.5{\mu}g/100g$ and $2.9{\pm}5.1{\mu}g/100g$, respectively. Both vitamins differed widely between animals and were present at a relatively low level compared to other reports (${\alpha}$-tocopherol 2.4-5.4 mg/100 g fat tissue and $30-220{\mu}g/100g$ muscle tissue). The correlation coefficients between subcutaneous and perirenal fats for retinol and ${\alpha}$-tocopherol content were 0.97 (p<0.01) and 0.82 (p<0.01), respectively, which showed high correlation. However, the correlation coefficients between retinol and ${\alpha}$-tocopherol contents for subcutaneous and perirenal fats were 0.11 and 0.08, respectively, which showed low correlation. Breed effect was observed in both vitamins. These results indicated that vitamins A and E in fat from Japanese Black and F1 cross cattle under the vitamin A controlling method are present at relatively low levels and feeds need to be supplemented with vitamin E.

• 한국지능시스템학회논문지
• /
• 제22권3호
• /
• pp.287-293
• /
• 2012

본 논문에서는 영상의 다차원 명암도 증감에 기반을 둔 유사도 측정에 의한 효율적인 영상정합 방법을 제안하였다. 여기서 다차원 명암도는 영상의 4방향을 고려한 유사성 판정으로 영상이 가지는 속성을 더욱 더 많이 반영하기 위함이고, 명암도 증감은 인접 픽셀간의 밝기변화를 고려함으로써 좀 더 포괄적으로 유사성을 측정하기 위함이다. 또한 측정된 4방향 각각의 명암도 증감에 대한 정규상호상관계수를 구하고, 그 각각에 바탕을 둔 전체 정규상호상관계수, 각 방향의 상관계수에 대한 산술평균과 단순 곱 및 최대값으로 정규화된 상관계수의 산술평균과 단순 곱으로 정의된 유사도 계수로 각각 정합을 측정하였다. 제안된 방법을 22개의 243*243 픽셀 얼굴영상과 9개의 500*500 픽셀 인물영상을 대상으로 각각 실험한 결과, 영상의 속성을 잘 반영한 우수한 정합성능이 있음을 확인하였다. 특히 각 방향의 상관계수에 대한 산술평균 유사도가 가장 우수한 신뢰성을 가지는 정합척도임을 알 수 있었다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2001년도 추계학술대회 논문집
• /
• pp.87-90
• /
• 2001

본 연구에서는 감성 평가 시스템에 가장 적합한 파라미터를 찾기 위하여 3가지 뇌파 파라미터를 이용하여 감정 분류 실험을 하였다. 뇌파 파라미터는 선형예측기계수(linear predictor coefficients)와 FFT 스펙트럼 및 AR 스펙트럼의 밴드별 상호상관계수(cross-correlation coefficients)를 이용하였으며, 감정은 relaxation, joy, sadness, irritation으로 설정하였다. 뇌파 데이터는 대학의 연극동아리 학생 4명을 대상으로 수집하였으며, 전극 위치는 Fp1, Fp2, F3, F4, T3, T4, P3, P4, O1, O2를 사용하였다. 수집된 뇌파 데이터는 전처리를 거친 후 특징 파라미터를 추출하고 패턴 분류기로 사용된 신경회로망(neural network)에 입력하여 감정 분류를 하였다. 감정 분류실험 결과 선형예측기계수를 이용하는 것이 다른 2가지 보다 좋은 성능을 나타내었다.