• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.731-741
• /
• 2008

Previous studies on the numerical simulation at the tidal reach of Han River tend to restrict downstream boundary as Jeon-ryu station due to difficulties in gaining cross section data and tidal elevation values at Yu-do. But, in this study, geometries beyond the confluence of Gok-reung stream and Im-jin River are constructed based on the numerical sea map; tidal elevation at the downstream boundary, Yu-do is estimated by harmonic analysis of In-cheon tide gage station so that hydrodynamic and diffusion behavior have been analyzed. The domain ranging from Shin-gok submerged weir to Yu-do is selected (which is 36.8 km in length). RMA-2 and RAM4 developed by Il Won Seo (2008) are applied to simulate flow and diffusion behavior, respectively. Numerical results of flow characteristic are compared with the measured data at Jeon-ryu station. Simulation is carried out from June 23 to 25 in 2006 on the ground that hydrologic data is satisfactory and tidal difference is huge during that period. The result shows that reverse flow occurs 5 times according to the tidal elevation at Yu-do and the maximum reverse flow is observed up to Jang-hang IC, which is 32.9 km in length. Also analysis is focused on the process of generation and disappearance of reverse flow, the distribution of water surface elevation and velocity along the maximum velocity line, and the transport of nonconservative pollutant. Pollutant injected from Gul-po stream spreads widely across the river; however, the size of BOD cloud entering from Gok-reung stream is relatively small because water depth at the mid and left side becomes deeper and maximum velocity occurs along the right bank so that transverse mixing is completed quickly. Finally, mixing characteristic of horizontal salinity distribution is obtained by estimating the salinity input with analytical solution of 1D advection-dispersion equation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.17-24
• /
• 2023

A post-processing technique for the measurement signal of a solenoid-type sensor is introduced. The solenoid-type sensor nondestructively evaluates an external tendon of prestressed concrete using the total flux leakage (TFL) method. The TFL solenoid sensor consists of primary and secondary coils. AC electricity, with the shape of a sinusoidal function, is input in the primary coil. The signal proportional to the differential of the input is induced in the secondary coil. Because the amplitude of the induced signal is proportional to the cross-sectional area of the tendon, sectional loss of the tendon caused by ruptures or corrosion can be identified by the induced signal. Therefore, it is important to extract amplitude information from the measurement signal of the TFL sensor. Previously, the amplitude was extracted using local maxima, which is the simplest way to obtain amplitude information. However, because the sampling rate is dramatically decreased by amplitude extraction using the local maxima, the previous method places many restrictions on the direction of TFL sensor development, such as applying additional signal processing and/or artificial intelligence. Meanwhile, the proposed method uses amplitude demodulation to obtain the signal amplitude from the TFL sensor, and the sampling rate of the amplitude information is same to the raw TFL sensor data. The proposed method using amplitude demodulation provides ample freedom for development by eliminating restrictions on the first coil input frequency of the TFL sensor and the speed of applying the sensor to external tension. It also maintains a high measurement sampling rate, providing advantages for utilizing additional signal processing or artificial intelligence. The proposed method was validated through experiments, and the advantages were verified through comparison with the previous method. For example, in this study the amplitudes extracted by amplitude demodulation provided a sampling rate 100 times greater than those of the previous method. There may be differences depending on the given situation and specific equipment settings; however, in most cases, extracting amplitude information using amplitude demodulation yields more satisfactory results than previous methods.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.3
• /
• pp.249-254
• /
• 2019

'Japonica 6' is a japonica rice variety developed from a cross between 'MS11', the beginning variety adaptable to tropical region, and 'IR86743-28-1-4', an elite line of high yield and good plant type by a Korea(RDA)-IRRI cooperative breeding program at IRRI in 2017. The growth duration of 'Japonica 6' is 121 days from sowing to harvest. It is 10 days later than that of the check variety 'MS11'. The culm length of 'Japonica 6' is 70 cm, and 1,000-brown rice grain weight is 26.7 g. It has a shorter culm and a larger grain. size than that of MS11. 'Japonica 6' is moderately resistant to blast disease but susceptible to bacterial blight, tungro virus and plant hoppers. The milled rice recovery rate of 'Japonica 6' is improved than that of 'MS11'. The head rice rate of 'Japonica 6' is significantly higher than that of 'MS11'. Yield of 'Japonica 6' is averagely 3.59 MT/ha of milled rice in 5 areas of the Philippines. The 'Japonica 6' was registered in Philippines and would be adaptable to the diverse regions of tropical Asia (Registration No in Philippines. BPI-NSIC-2017-Rc 484SR).

• Korean Journal of Breeding Science
• /
• v.51 no.1
• /
• pp.34-40
• /
• 2019

'Jungmo1033', a japonica rice variety, was developed by the rice breeding team at the National Institute of Crop Science (NICS) in 1992. It is derived from a cross between a native variety 'Jagwangdo', which has translucent milled rice and medium maturity; and 'Hwayeong', which is an elite line with bacterial blight resistance and mid-late maturity. The heading date of 'Jungmo1033' was August 10 in the middle plain area of Korea, which was two days later than that of 'Hwaseong'. 'Jungmo1033' has a culm length of 79 cm, which was 5 cm shorter than that of 'Hwaseong', and 105 spikelets per panicle. 'Jungmo1033' showed resistance to bacterial blight (K1, K2, and K3 races) and stripe virus, but susceptibility to the K3a race of bacterial blight, dwarf and black-streaked dwarf viruses, and planthoppers. The milled rice of this variety exhibited translucency and a medium short grain shape. It had an excellent appearance and lower amylose content (19.1%) than that of 'Hwaseong'. The characteristics related to grain milling were better than those of 'Hwaseong', especially head rice milling recovery ratio and head rice ratio (94.8%). 'Jungmo1033' showed a milled rice productivity of 5.38 MT/ha at 11 sites under ordinary cultivation conditions. (Registration No. 5723)

• 한국노년학
• /
• v.29 no.4
• /
• pp.1361-1381
• /
• 2009

There have lately been a variety of social issues in our society due to rapid social changes. Specifically, how to approach elderly people who suffer from dementia is never an easy task, and few in-depth studies have ever focused on their quality of life due to that. The purpose of this study was to examine the quality of life of elderly people with dementia and the relationship between their quality of life and the environments of facilities for them in an attempt to lay the foundation for the development of compatible programs tailored to the environments of the facilities and for relevant policy setting. It's ultimately meant to improve the quality of life of the elderly with dementia and the environments of facilities for them. The subjects in this study were elderly people with dementia who were housed in senior residential and medical welfare facilities in Daegu and Gyeongsangbukdo. The collected data were analyzed with a SPSS 12.0 program, and frequency analysis, cross-tabs and multiple logistic regression analysis were utilized. As a result, facility environments were identified as one of the variables that had a significant impact on the quality of life of the elderly people with dementia. There are some suggestions about how to boost their quality of life: First, good environments should be prepared in consideration of the characteristics of elderly people with dementia in order for themto be satisfied with their own quality of life, and the way of looking at their potentials should be changed. Second, it's found that main caregivers affected the quality of life of the elderly people with dementia, and the kind of programs that focus on the improvement of the relationship between elderly people with dementia and their main caregivers is required. Third, there should be a change in the environments of the facilities. The facilities should be well equipped to successfully respond to the symptoms of elderly people with dementia. To redress their poor accessibility to the facilities, infrastructure involving nursing homes and professional personnels should be built by utilizing the Internet, and the facilities and local community should make concerted efforts to provide quality care to elderly people in want of it.

• (The) Research of the performance art and culture
• /
• no.22
• /
• pp.123-155
• /
• 2011

This study aims to closely read Kim Jong-il's "About Stage Drama Arts" and disclose the new reality as evaluated by him. The study took the method by which to compare Kim Jong-il's theory on drama and North Korea's drama theory in the 1950s, and the findings of this study revealed that it was irrational to grant the adjective "new" to Kim Jong-il's drama theory. This is because tradition inheritance and newness cross each other. First, his tradition inheritance aspect was found in his playwriting method. In playwriting method, Kim Jong-il's argument about characters and language is an extension of the 1950s drama theory, and his theory on JongZa(seeds) is the transformation of the concept proposed in the 1950s. Also, the expression means of dramas and drama arts is dialogue, and his guideline to focus on the art of conversation rather than on acting is interpreted to be a reduced concept of drama arts, compared with the 1950s drama theory. On the other hand, his newness aspect can be clearly discovered in the materialization of stage. The fixed stage background, without dark change, shifts to another situation as it is, and this stage setting is clearly distinguished from the previous stage setting. The attempt is worth highly evaluating to allow the stage to reflect actors' emotional flows and let them act. Also, the attempt is distinctively distinguished from previous drama theories to allow the chorus' positive involvement in dramas so as to directly deliver characters' emotions to the audience and to trigger the audience' response as intended by creators. From the perspectives of drama evaluation, Kim Jong-il's theory and practice regarding stage and music is understood to maximize the audio-visual effects. Therefore, Kim Jeong-il's drama theory, as he argues, is not a completely new theory, but a transformational inheritance of existing drama theories, and a creation theory with focus on expansion of spectacles.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.1
• /
• pp.76-81
• /
• 2019

'Asemi' is a rice variety derived from a cross between 'Jinmibyeo' which has translucent milled rice and medium maturity and 'Cheolwon46', an elite line with high yield and early maturity by the rice breeding team at NICS, RDA in 2013. The heading date of 'Asemi' is August 1, six days earlier than the check variety 'Hwaseong'. It has 82 cm culm length and 109 spikelets per panicle. 'Asemi' is resistant to blast disease, stripe virus and tungro virus, but susceptible to other viruses and planthoppers. The milled rice of this variety exhibits translucent, clear non-glutinous endosperm and short grain shape. It has protein content (6.7%) higher than 'Hwaseong', and amylose content (19.5%) similar to 'Hwaseong'. The milled rice recovery rate of 'Asemi' is similar to that of 'Hwaseong'. However, the head rice rate of 'Asemi' is higher than that of 'Hwaseong'. Milled rice yield of 'Asemi' is 5.23 MT/ha in ordinary cultivation. ' Asemi' could be adaptable to the wide region of tropical Asia (Registration No. 5639).

• Korean Journal of Breeding Science
• /
• v.51 no.3
• /
• pp.190-200
• /
• 2019

It is reported that the absence of lipoxygenase-3 (LOX-3) may contribute to a reduction in stale flavor after the storage of rice. To improve the quality of stored rice of the Korean japonica rice cultivar, we conducted a breeding program to develop near-isogenic rice without LOX-3 in the genetic background of Saenuri, a mega variety of Korea. In the first step of the breeding program, we used a donor parent of LOX-3 null, Daw Dam, and a recurrent japonica parent, Sindongjin, to develop HR27873-AC12 by backcross (BC₁), color test for introgression of lox-3, and anther culture for rapid fixation. In the second step, we used the donor parent, HR27873-AC12, and the recurrent parent, Saenuri, to develop HR28896-31-3-1-1 by backcross (BC₁), marker-assisted selection (MAS) for lox-3, and phenotypic selection (PS) for agronomic traits. Finally, in the third step, we developed HR30960-186-2-1-2-1 (Jeonju624), derived from a cross between Saenuri and HR28896-31-3-1-1, by MAS for lox-3 and PS with high selection pressure for agronomic characteristics. Jeonju624 was confirmed with the introgression of lox-3 by molecular marker. Jeonju624 was a mid-late maturing rice with similar agronomic characteristics to Saenuri, lodging tolerance with short culm, erect plant architecture, and resistance to bacterial blight and rice stripe virus. The yield components of Jeonju624 were mostly similar to Saenuri, except for the 1,000-grain weight of brown rice. The appearance of the grain of Jeonju624 was better than that of Saenuri, and the characteristics of cooked rice were similar to those of Saenuri. In the genetic background analysis using 406 KASP (Kompetitive Allele-Specific PCR) markers, Jeonju624 was confirmed to be the near-isogenic line (NIL) of Saenuri with a 95.8% recovery rate. Jeonju624 is the NIL of Saenuri without LOX-3, and overcomes the linkage drag of Daw Dam with similar agronomic characteristics and genetic background to Saenuri. Jeonju624 can be utilized as a practical cultivar to improve the quality of stored rice, breeding material for the introgression of lox-3, and genetic material to elucidate the effect of introgressed genes.

• Korean Journal of Breeding Science
• /
• v.51 no.4
• /
• pp.504-514
• /
• 2019

'Yechan' is a high grain quality mid-late maturing rice cultivar with lodging tolerance and multiple disease resistance. It was a derived from a cross between 'Hopum' and 'Iksan537' (cultivar name 'Haepum'). 'Hopum' is a high grain quality mid-late maturing rice cultivar with strong lodging tolerance and 'Haepum' is a high grain quality medium maturing rice cultivar with multiple disease resistance. To shorten the breeding period, another culture method was applied to the F₁ plants. 'Yechan' was selected through the pedigree method, yield trials, and local adaptability tests, with a high selection pressure for grain quality, lodging, and disease resistance. The heading date of 'Yechan' was August 14, one day later than that of 'Nampyeong'. 'Yechan' is a cultivar tolerant to lodging and it has short culms. It has multiple disease resistance against rice blast, rice stripe virus, and bacterial blight, including the K3a race, the most virulent race in Korea. The yield of 'Yechan' was similar to that of 'Nampyeong'. 'Yechan' showed excellent grain appearance, superior taste when cooked, and enhanced milling performance; thus, we concluded that it could contribute to the improvement of Korean japonica rice cultivar quality. 'Yechan', a high grain quality mid-late maturing rice cultivar with lodging tolerance and multiple disease resistance, would be suitable for cultivation in the southern plain area in Korea and has been utilized in the breeding programs aimed at enhancing the grain quality and stability for the cultivation of Korean japonica rice (Registration No. 7647).

• Asia Marketing Journal
• /
• v.7 no.3
• /
• pp.53-76
• /
• 2005

With rapid technological and market change, new product development (NPD) complexity is a significant issue that organizations continually face in their development projects. There are numerous factors, which cause development projects to become increasingly costly & complex. A product is more likely to be successfully developed and marketed when the complexity inherent in NPD projects is clearly understood and carefully managed. Based upon the previous studies, this study examines the nature and importance of complexity in developing new products and then identifies several issues in managing complexity. Issues considered include: definition of complexity : consequences of complexity; and methods for managing complexity in NPD projects. To achieve high performance in managing complexity in development projects, these issues need to be addressed, for example: A. Complexity inherent in NPD projects is multi-faceted and multidimensional. What factors need to be considered in defining and/or measuring complexity in a development project? For example, is it sufficient if complexity is defined only from a technological perspective, or is it more desirable to consider the entire array of complexity sources which NPD teams with different functions (e.g., marketing, R&D, manufacturing, etc.) face in the development process? Moreover, is it sufficient if complexity is measured only once during a development project, or is it more effective and useful to trace complexity changes over the entire development life cycle? B. Complexity inherent in a project can have negative as well as positive influences on NPD performance. Thus, which complexity impacts are usually considered negative and which are positive? Project complexity also can affect the entire organization. Any complexity could be better assessed in broader and longer perspective. What are some ways in which the long-term impact of complexity on an organization can be assessed and managed? C. Based upon previous studies, several approaches for managing complexity are derived. What are the weaknesses & strengths of each approach? Is there a desirable hierarchy or order among these approaches when more than one approach is used? Are there differences in the outcomes according to industry and product types (incremental or radical)? Answers to these and other questions can help organizations effectively manage the complexity inherent in most development projects. Complexity is worthy of additional attention from researchers and practitioners alike. Large-scale empirical investigations, jointly conducted by researchers and practitioners, will help gain useful insights into understanding and managing complexity. Those organizations that can accurately identify, assess, and manage the complexity inherent in projects are likely to gain important competitive advantages.