• 한국전자파학회논문지
• /
• 제16권5호
• /
• pp.472-481
• /
• 2005

본 논문에서는 Pareto 유전자 알고리즘을 이용한 최적화기법을 적용하여 UHF 대역 내에서 동작하는 crooked wire 형태의 RFID 리더 안테나를 설계하였다. 최적화 과정은 안테나의 제한된 크기, 반사 손실 대역폭(VSWR<2), 원형 편파 대역폭(Axial Ratio<3 dB), 인식 영역이 실제 조건과 인식 영역에 부합하도록 수행하였다 최적화된 안테나들 중 표본 안테나를 제작하였으며, 리더 안테나 특성을 측정하여 시뮬레이션 결과와 비교 및 검증하였다. 안테나 동작원리를 안테나 선로에 유기된 전류를 분석하여 설명하였으며, 안테나의 구조적 민감도와 주요 설계 변수(critical design parameters)를 찾기 위해 랜덤 에러(random error) 방식을 안테나 본체의 선로가 꺾이는 부분에 적용한 후, 안테나 구조와 원형 편파 대역폭 및 안테나 반사 손실 대역폭 사이의 관계를 정량화 하였다.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.5-10
• /
• 2007

We prepared four different $MgB_2$ films on $Al_2O_3$ by hybrid physical chemical vapor deposition method with thicknesses ranging from $0.65\;{\mu}m$ to $1.2\;{\mu}m$. X-ray diffraction patterns confirm that all the $MgB_2$ films are c-axis oriented perpendicular to $Al_2O_3$ substrates. The superconducting onset temperature of $MgB_2$ films were between 39.39K and 40.72K. The residual resistivity ratio of the $MgB_2$ films was in the range between 3.13 and 37.3. We measured the angle dependence of critical current density ($J_c$) and resistivity, and determined the upper critical field ($H_{c2}$) from the temperature dependence of the resistivity curves. The anisotropy ratios defined as the ratio of the $H_{c2}$ parallel to the ab-plane to that perpendicular to the ab-plane were in the range of 2.13 to 4.5 and were increased as the temperature was decreased. Some samples showed increase of $J_c$ and decrease of resistivity when a magnetic field in applied parallel to the c-axis. We interpret this angle dependence in terms of enhanced flux pinning due to columnar growth of $MgB_2$ along the c-axis.

• 한국세라믹학회지
• /
• 제34권2호
• /
• pp.115-122
• /
• 1997

액상 분말 합성법 중의 하나인 에멀젼 건조 방법에 의한 분말 합성은 조성 조절이 용이하고 균질한 미립자 분말을 제조할 수 있는 장점을 지니고 있다. 에멀젼 건조법을 사용하여 합성 분체의 초기 형상과 입도를 제어하고 근본적으로 더욱 개선된 homogeneity를 얻었다. 에멀젼의 분리를 억제시킬 수 있는 계면활성제, 오일상 및 수용액의 혼합비를 조절함으로써 Bi(Pb)-Sr-Ca-Cu-O 초전도 분말을 제조할 수 있었다. 이 방법에 의하여 합성된 산화물 초전도체 분말의 특성 및 pellet으로 성형한 시편을 열처리하여 미세구조와 전기적 특성을 조사하였다. 또한, OPIT(Oxide Powder-in-tube)법에 의해 테이프를 제작하여 미세구조와 전기적 특성을 관찰하였다. 합성된 분말의 입자크기는 1$\mu$m이하의 구형이었으나 대부분이 2~5$\mu$m크기로 응집되어 있었다. Ar분위기의 1/13atm 산소분압(Po2)에서 84$0^{\circ}C$로 72시간 동안 열처리한 덩어리형 시편의 임계저항온도는 108K이었으며, 1차와 2차 열처리한 테이프의 임계전류는 각각 0.4A와 1.5A이었다.

• 임상간호연구
• /
• 제29권3호
• /
• pp.312-326
• /
• 2023

Purpose: This study attempted to analyze the staffing level and critical care nursing fees of intensive care units at tertiary and general hospitals and to provide a professional judgment-based recommendation on staffing level and critical care nursing fee schedules. Methods: Staffing grades and critical care nursing fee schedules for the first quarter of 2017~2020 and the fourth quarter of 2020~2022 were analyzed. A survey was conducted on nursing managers and nurses about the current and appropriate staffing levels. A total of 77 nurse managers and 708 nurses working in Intensive Care Unit(ICU)s at tertiary and general hospitals participated in the study. Results: Grade 1 staffing increased from 25.6% in 2017 to 92.1% in 2022 at tertiary hospitals and from 0.8% in 2017 to 28.4% in 2022 at general hospitals. The current staffing ratios of tertiary and general hospitals were 1:2.21 and 1:2.77, respectively. The appropriate staffing ratio according to nurse managers and nurses was 1:1.00 in patients with more than a ventilator application and 1:2.00 in patients without any ventilator application in tertiary hospitals, and it was 1:1.25 in patients with more than a ventilator application and 1:2.00 in patients without any ventilator application in general hospitals, respectively. Conclusion: The appropriate staffing level was suggested from 1:1.0 to 1:2.0. The new nursing fee schedules were suggested from 1:1.0 (Grade 1) to 1:3.0 (Grade 5) and recommended to be paid based on the staffing grade, minimum number of nurses, and standard annual working days. It is expected to increase staffing levels and provide a better nursing work environment.

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.357-371
• /
• 2016

Column base connections are critical components in steel structures because they transfer axial forces, shear forces and moments to the foundation. Exposed column bases are quite commonly used in low- to medium-rise buildings. To investigate shear transfer in exposed column base plates, four large scale specimens were subjected to a combination of axial load (compression or tension) and lateral shear deformations. The main parameters examined experimentally include the number of anchor rod, arrangement of anchor rod, type of lateral loading, and axial force ratio. It is observed that the shear resisting mechanism of exposed column base changed as the axial force changed. When the axial force is in compression, the resisting mechanism is rotation type, and the shear force will be resisted by friction force between base plate and mortar layer. The specimens could sustain inelastic deformation with minimal strength deterioration up to column rotation angle of 3%. The moment resistance and energy dissipation will be increased as the number of anchor rods increased. Moreover, moment resistance could be further increased if the anchor rods were arranged in details. When the axial force is in tension, the resisting mechanism is slip type, and the shear force will be resisted by the anchor rods. And the shear resistance was reduced significantly when the axial force was changed from compression to tension. The test results indicated that the current design approach could estimate the moment resistance within reasonable acceptance, but overestimate the shear resistance of exposed column base.

• 한국기계가공학회지
• /
• 제6권2호
• /
• pp.34-40
• /
• 2007

Antifatigue failure technology take an important part of current industries. Currently, the shot peening is used for removing the defect from the surface of steel and improving the fatigue strength on surface. Therefore, this paper the effect of compressive residual stress and corrosion of spring steel(SAE 5155)by shot-peening on fatigue crack growth characteristics in stress ratio(R=0.05)was investigated with considering fracture mechanics. By using the methods mentioned above, We arrived at the following conclusions. The fatigue crack growth rate(da/dN) of the shot-peening material was lower than that of the un-peening material. And in stage I, ${\Delta}Kth$, the threshold stress intensity factor, of the shot-peen processed material is high in critical parts unlike the un-peening material. Also m, fatigue crack growth exponent and number of cycle of the shot-peening material was higher than that of the un-peening material. That is concluded from effect of da/dN. Finally fracture of shot-peening material and un-peening material was identified and discussed in this study.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.345-348
• /
• 2004

For practical applications, the evaluation of reliability or endurance of HTS conductors is necessary. The mechanical properties and the critical current, $I_c$, of multifilamentary Bi-2223 superconducting tapes, externally reinforced with stainless steel foils, subjected to high cycle fatigue loading in the longitudinal direction were investigated at 77K. The S-N curves were obtained and its transport property was evaluated with the increase of repeated cycles at different stress amplitudes. The effect of the stress ratio, R, on the $I_c$ degradation behavior under fatigue loading was also examined considering the practical application situation of HTS tapes. Microstructure observation was conducted in order to understand the L degradation mechanism in fatigued Bi-2223 tapes.

• 한국기계가공학회지
• /
• 제3권3호
• /
• pp.79-85
• /
• 2004

The lightness of components required in automobile and machinery industry is requiring high strength of components. In particular, fatigue failure phenomena, which happen in metal, bring on danger in human life and property. Therefore, antifatigue failure technology takes an important part of current industries. Currently, the shot peening is used for removing the defects from the surface of steel and improving the fatigue strength on surface. Therefore, in this paper the effect of compressive residual stress of spring steel(JISG SUP-9)by shot peening on fatigue crack growth characteristics in stress ratio(R=0 1, R=0 3, R=0 6)was investigated considering fracture mechanics. By using the methods mentioned above, I arrived at the following conclusions: (1) The fatigue crack growth rate(da/dN) of the shot peening material was lower than the unpeening material And in stage I, ${\Delta}K_{th}$, the threshold stress intensity factor, of the shot peening material is high in critical parts unlike the unpeening material. (2) Fatigue life shows more Improvement in the shot peening material than in the unpeening material. And compressive residual stress of surface on the shot peening processed operate the resistance of fatigue crack propagation.

• 복식문화연구
• /
• 제16권3호
• /
• pp.547-558
• /
• 2008

This study aims on observing the social recognition and its aspects for men taking care of their outer appearances at current point where men are rapidly rising as the main consumer in the beauty industry while their interest for outer appearances are increasing. Therefore, we observed the overall trend and changes in social recognition for male looks by analyzing the contents of newspaper articles from 1990 to 2005 that play the critical role of spreading new information trend while reflecting the interest of people of a certain era. As a result, articles related to male looks were divided into fashion, hair, skin and cosmetics, physical image, cosmetic surgery, trend related to male looks, and male oriented stores and sites, and among them, articles related to fashion and skin took up the highest ratio. Especially articles related to the trend took up the largest ratio as it reflects the properties of two industries launching new products. Moreover, articles related to male looks tended to increase generally according to timely changes, and rapidly increased especially since 2000.

• Steel and Composite Structures
• /
• 제35권3호
• /
• pp.405-413
• /
• 2020

Current study on the buckling analysis of steel plate in composite structures normally focuses on applying finite element method to derive the buckling stress. However, it is time consuming, computationally complicated and tedious for general use in design by civil engineers. Therefore, in this study an analytical study is conducted to predict the buckling behavior of steel plates in composite structures. Hand calculation method was proposed based on energy principle. Novel buckling shapes with biquadratic functions along both loaded and unloaded direction were proposed to satisfy the boundary condition. Explicit solutions for predicting the critical local buckling stress of steel plate is obtained based on the Rayleigh-Ritz approach. The obtained results are compared with both experimental and numerical data. Good agreement has been achieved. Furthermore, the influences of key factors such as aspect ratio, width to thickness ratio, and elastic restraint stiffness on the local buckling performance are comprehensively discussed.