• Steel and Composite Structures
• /
• 제16권6호
• /
• pp.703-718
• /
• 2014

The initial clamping forces of high strength bolts subjected to different faying surface conditions drop within 500 hours regardless of loading, any other external force or loosening of the nut. This study develops a mathematical model for relaxation confined to creep on a coated faying surface after initial clamping. The quantitative model for estimating relaxation was derived from a regression analysis for the relation between the creep strain of the coated surface and the elapsed time for 744 hours. This study establishes an expected model for estimating the relaxation of bolted joints with diverse coated surfaces. The candidate bolts are dacro-coated tension control bolts, ASTM A490 bolt, and plain tension control bolts. The test parameters were coating thickness, species of coating. As for 96, 128, 168, and $226{\mu}m$ thick inorganic zinc, when the coating thickness was increased, relaxation after the initial clamping rose to a much higher range from 10% to 18% due to creep of the coating. The amount of relaxation up to 7 days exceeded 85% of the entire relaxation. From this result, the equation for creep strain can be derived from a statistical regression analysis. Based on the acquired creep behavior, it is expected that the clamping force reflecting relaxation after the elapse of constant time can be calculated from the initial clamping force. The manufacturer's recommendation of inorganic zinc on faying surface as $75{\mu}m$, appears to be reasonable.

• 콘크리트학회논문집
• /
• 제11권3호
• /
• pp.23-34
• /
• 1999

In designing PSC box girder bridge, the dead load, prestressing force, creep and shrinkage of concrete are the main factors which influence the camber and deflection of segmental concrete structure under construction. Among these factors the creep and shrinkage are the functions of the time-dependent property which, therefore, must considered with time. The prediction model for estimating creep and shrinkage of concrete has been suggested by ACI, CEB/FIP, JSCE and KSCE design code. In this study the creep and shrinkage test were carried out for four curing ages of concrete which was applied to the pretressed concrete box-girder bridge at a construction site, and the results of test were compared to the values of prediction by the design code. Shrinkage test shows that the test results are similar to KSCE-96 and JSCE-96 but very higher than other prediction model and creep test results are generally similar to ACI-209 and DSCE-96 but lower than other prediction models in contrast to shrinkage test.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.99-107
• /
• 1999

In designing the Prestressed concrete box-girder bridge. dead load, prestressing force, creep and shrinkage of concrete are the main factors which influence the camber and deflection of segmental concrete structure under construction. Among these factors the creep and shrinkage are the functions of the time-dependent property which. therefore, must be considered with time. The prediction model for estimating creep and shrinkage of concrete has been suggested by ACI, CEB/FIP, JSCE and KSCE design code and EMM, AEMM, RCM, IDM and SSM has been suggested for analytical method in consideration of time-dependent characteristics. In this study the creep test was carried out for four different curing ages of concrete which were applied to the Prestressed concrete structure at the construction site, and the results of test were compared with the values of creep prediction proposed by the design code. Also the creep test was performed with step-wise incremental stresses and the results were compared to the analytical values.

• 한국철도학회논문집
• /
• 제17권5호
• /
• pp.342-348
• /
• 2014

차륜과 레일의 접촉은 크리프를 유발한다. 크리프 증가에 따라 크리프력이 선형적으로 증가한다고 가정하는 선형 크리프 이론은 철도차량의 진동이 무한히 발산하는 주행속도인 임계속도를 결정한다. 그러나 실제 크리프력은 일정값에 수렴하며 철도차량의 횡진동은 무한히 증가되지도 않는다. 본 연구에서는 비선형 크리프 이론인 Vermeulen이론, Polach이론, 실제 차륜과 레일의 형상을 고려하여 계산된 줄이론 등을 6 자유도 대차모델에 적용하여 철도차량의 동특성을 검토하였다. 그 결과 철도차량의 진동은 특정 주행속도 이상에서 한계사이클을 만들었으며, 크리프 곡선의 기울기가 클수록 한계사이클이 발생하는 주행속도는 낮아졌다. 또한 한계사이클은 플랜지 접촉으로 인해 그 크기가 제한되는 헌팅현상이 발생됨을 알았다.

• 농업과학연구
• /
• 제22권1호
• /
• pp.1-10
• /
• 1995

기계화농업에서 농작물은 재배관리, 수확 및 가공과정에서 기계와 접촉하면서 기계로부터 순간적인 하중 및 지속적으로 받는 하중과 같은 여러 종류의 하중을 받아 변형되거나 파괴로 손상되는 등의 결과가 발생한다. 즉 기계작업 과정에서 작물은 파괴도 일어날 수 있으므로 작물의 물성에 따라 기계가 적응하면서 작업이 수행되어야 질적인 작업능율을 높일 수 있게 된다. 본 연구는 재배 및 수확과정에서 기계로부터 받는 벼 줄기의 역학적 특성의 구명을 위하여 크리이프 시험장치를 설계 제작하여 컴퓨터 측정장치를 구성, Burger모형(模型)에 의하여 수확시기에 측방향(側方向)의 압축하중 및 휨하중을 받는 벼 줄기의 크리이프 특성(特性)을 측정(測定) 분석(分析)하였다. 결과를 요약(要約)하면 다음과 같다. 1. 크리이프 거동은 4요소 Burger모형(模型)에 의하여 벼줄기의 크리이프거동을 정확히 예측(豫測)할 수 있었으며, 예측한 결과는 실측치에 거의 일치하였다. 2. 압축하중의 크기가 증가함에 따라 크리이프 변형량은 증가하는 경향이었는데, 25N 이하의 낮은 하중에서 정상상태 크리이프거동을 하였고, 30N 이상의 높은 하중에서 대수적 크리이프거동을 하였다. 3. 작용하중에 따른 크리이프거동을 나타내는 모형의 계수를 구하였는데 순간탄성계수 $E_0$ 및 지연시간 ${\tau}_K$는 작용하중의 증가에 따라 증가하였고, 지연탄성계수 $E_r$ 및 점성계수 ${\eta}_v$는 작용하중 증가에 따라 감소하는 점탄성(粘彈性) 재료(材料)임을 확인할 수 있었다. 4. 측방향 압축 하중이 25.0 N 이상 작용할 때 줄기 중부 및 상부에서 정상상태(定常狀態) 크리이프가 일어나, 하중의 작용시 줄기 부위(部位)에 따른 저항력은 하부(下部)에서 가장 컸고, 중부(中部)에서 가장 작게 나타나 파손 가능성이 높은 것으로 판단된다. 5. 압축하중 및 휨하중의 작용에 의한 줄기 부위에 따른 크리이프변형은 줄기 중부(中部)에서 가장 크게 일어났고, 하부(下部)에서 가장 작게 일어나 중부의 저항력이 가장 낮게 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.674-679
• /
• 1998

In designing the prestressed concrete box-bridge, the dead load, prestressing force, creep and shrinkage of concrete are the main factors which influence the camber and deflection of segmental concrete structure under construction. Among these factors the creep and shrinkage are the functions of the time-dependent property which, therefore, must be considered with time. The prediction model for estimating creep and shrinkage of concrete has been suggested by ACI, CEB/FIP, JSCE and KSCE design code and EMM, AEMM, RCM, IDM and SSM has been suggested for analytical method in consideration of the time-dependent characteristics. In this study, the creep test was carried out for four curing ages of concrete which were applied to the prestressed concrete structure at a construction site, and the results of test were compared to the values of creep prediction by the design code. Also the creep test of step-wise incremental stresses were performed and were compared to analytical methods.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1177-1185
• /
• 1996

The crack growth under creep condition is one of the major damage mechanisms which determines remaining life of the component operating at high temperatures. In this paper, the creep crack growth by grain boundary cavitation is studied, which is frequently observed failure mechanism for creep brittle materials. As a result of diffusive growth of creep cavities, it is shown that the crack-tip stress field is modified from the original stress distribution by the amount of singularity attenuation parameter which is function of crack growth rate and material properties. Also, the stress relaxation at crack-tip results in the extension of cavitating area by the load dump effect to meet the macroscopic force equilibrium conditdion.

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.164-170
• /
• 2003

To ensure the reliability of DVDR-P and DVD-ROM, it is imperative to remedy the unrecoverable creep deformation and/or relaxation of the holding force of an optical disc holder. To predict the deformation of an optical disc holder, a deformation analysis of an 80 mm optical disc holder considering the creep characteristics of 3 plastic materials has been conducted. Subsequently, the results by this Finite Element Analysis (FEA) are experimentally verified. A disc holder inserted in a cartridge case is kept in a chamber of $60^{\circ}C$ with 90 % humidity for 24 hours. The arm span and the holding force of the disc holder are measured after being left for another 24 successive hours at a room temperature and under normal humidity. The predicted results by FEA are in good agreement with experimentally measured values.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.159-164
• /
• 2000

In this study, the deformation analysis of 80mm optical disk holder considering the creep characteristics of plastic materials has been conducted and experimentally verified. It is very important to remedy the unrecoverable creep deformation and relaxation of holding force of an optical disk holder for the reliability of DVDR-P, DVD-ROM. A disk holder inserted in a cartridge case has been kept in the chamber with $60^{\circ}C$ temperature and 90% humidity for 24 hours. After storage test, the arm span and holding force of a disk holder have been measured after 24 hours at room temperature and normal humidity. The predicted results are in good agreement with experimentally measured one.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.107-112
• /
• 2001

The IPC(Incremental Prestressed Concrete) which is gradually introducing the tensile force by tendons has been recently developed for reducing the effective depth of PSC bridges. As well known, concrete experiences long-term deformation such as creep and drying shrinkage, and the prediction of the long-term behavior of concrete bridges is essential for both safety and serviceability aspects. This paper was analysed the long-term behavior of a continuous 2-span IPC girder bridge taking into consideration of creep, drying shrinkage and the time of tensile force introduction. As results, the shrinkage of slab concrete increases the negative moment at interior support, and the The difference of concrete ages between slab and girder increases the camber. The effect of initial tensile force is larger than the effect of secondary tensile force in the tendons.