• 한국안전학회지
• /
• 제17권4호
• /
• pp.5-10
• /
• 2002

For fitness-for-service evaluation of high temperature plant components with defects, crack growth life must be assessed properly as indicated in the recent draft of API 579 code. Type 308 stainless steel has been widely used as a field weld material in the petrochemical industry. In this study, creep crack data of type 308 stainless steel are collected and re-analyzed using $C_t$ as a characterizing fracture parameter. A unique da/dt versus $C_t$ relationship was obtained despite of difference of creep deformation constant of the reviewed materials and specimen geometry of the tested specimens. The obtained results can be employed for crack growth life assessment and fitness-for-service evaluation for the cracks in high temperature components. It is also argued that since the effect of creep properties and other material variability on the creep crack growth behavior would be minor the obtained model may be applied for most of the 308 stainless steels.

• 콘크리트학회지
• /
• 제11권1호
• /
• pp.279-288
• /
• 1999

콘크리트 구조물의 크리프해석은 주로 크리프식의 중첩원리에 기초한 방법에 의해 수행되고 있다. 그러나 크리프식의 중첩을 응력이 증가하거나 일정할 경우에는 비교적 정확한 예측이 가능하지만, 응력이 감소하는 경우에는 상당한 오차를 나타낸다. 이것은 지속하중과 응력감소 과정에서 크리프와 관련된 콘크리트의 성질이 변화되므로 크리프 회복을 크리프 식의 중첩으로 정확하게 모사할수 없기 때문이다. 따라서, 본 연구에서는 감소와 증가를 반복하는 응력 이력을 지니는 콘크리트 구조물의 좀더 정확하고 합리적인 장기거동 해석을 위하여 응력의 감소를 단순히 크리프식의 중첩에 의해 해석한 기존의 방법과는 달리 크리프식과 크리프 회복식으로 표현하여, 소위 2함수 방법(two-function method)를 콘크리트구조물의 해석에 적용하는 방법을 제시하였다. 본 연구의 2함수방법을 콘크리트 구조물의 장기거동 해석을 적용하기 위해, 시간단계 동안 다양한 응력 변화에 대하여 크리프 변형도 증분량을 계산하는 방법을 제시하였다. 본 연구의 해석방법에 의해서 해석된 결과를 기존의 크리프식의 중첩에 의한 결과 및 기존의 실험결과들과 비교 분석한 결과, 기존의 중첩법은 실험결과와 많은 차이를 보이고 있으나 본 연구의 해석방법은 실험결과와 잘 맞고 있음을 보여주고 있다. 따라서, 크리프회복식을 이용하는 본 연구의 해석방법은 기존의 크리프식의 중첩방법이나 기존의 설계기준에 비해 변화하는 응력이력 하에서의 콘크리트 구조물의 크리프거동을 더 정확하게 서술할 수 있는 방법으로서 앞으로 설계기준 작성과 실제 구조물 해석에 효율적인 응용이 기대되고 있다.

• 한국식품과학회지
• /
• 제30권4호
• /
• pp.803-810
• /
• 1998

도토리 전분의 노화에 대한 sucrose 영향을 관찰하기 위해서 기계적 성질과 열적 성질을 조사하였다. 정제 전분의 수분과 아밀로오스 함량은 각각 9.35%, 27%였다. 정제 전분의 중량 평균 분자량과 수 평균 분자량은 각각 $1.22{\times}10^6$과 $1.37{\times}10^5$이였고 다분산도는 8.90으로 아밀로오스, 아밀로펙틴 보다 높아서 도토리 전분은 불균일계임을 알 수 있었다. Creep 실험으로부터 sucrose 첨가 겔의 creep compliance는 저장 초기에는 sucrose 농도가 증가할수록 감소하였는데 이는 전분, sucrose와 전분내의 자유수와의 상호 작용에 의한 수소결합 형성에 기인한다. DSC 흡열곡선으로부터 호화온도와 엔탈피는 sucrose 농도가 증가할수록 증가하였다. 저장 후기에는 creep compliance가 농도가 증가할수록 증가하여 sucrose는 겔의 softness를 증가시킨다고 볼 수 있으며 재호화 엔탈피는 sucrose 농도가 증가하면 감소하였다. 호화 엔탈피와 재호화 엔탈피로부터 노화비율을 구하였고, sucorse 농도가 증가하면 노화비율은 감소하였다. 기계적 성질과 열적 성질 측정으로부터 sucrose는 도토리 전분의 호화와 노화를 지연시키는 작용을 함을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.555-556
• /
• 2008

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.44-44
• /
• 2005

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권11호
• /
• pp.1540-1546
• /
• 2009

One hundred and forty-four piglets with an average birth weight of 1,672${\pm}$13.4 g were used to evaluate different feeding strategies for piglets reared from birth on a dummy sow. A 3${\times}$2 factorial experiment compared three nursing frequencies (1, 3 or 6 h intervals) and two feeding regimes (milk only, or milk combined with access to creep feed and water). The piglets which were nursed at one hour intervals had the lightest body weights at all days, and the poorest combined milk and creep feed dry matter conversion efficiency to piglet body weight gain in the second week. Piglets which were nursed at 3 h intervals had the heaviest body weight at day 15 and 22, but those nursed at 6 h intervals achieved similar body weight by days 29 (milk withdrawal) and 36. Piglets offered creep feed were observed to wean themselves before cessation of milk availability, and the timing of this self-weaning depended on the nursing frequency. The piglets nursed at one hour intervals weaned themselves between day 22 and day 29, those nursed at 3 h intervals weaned themselves between day 15 and day 22, whilst those nursed at 6 h intervals weaned themselves between day 8 and day 15. The piglets which were nursed at 6 h intervals had the highest total dry matter intake in weeks 3 and 4 when fed with milk, creep feed and water but not when fed milk only. They consequently had the poorest dry matter conversion efficiency in the fourth week and overall when fed with milk, creep feed and water, but not when fed milk only. It is concluded that the optimal management routine under these conditions is a 3 h nursing cycle with provision of supplementary creep feed and water.

• 한국재료학회지
• /
• 제18권6호
• /
• pp.326-333
• /
• 2008

Since the 1990s, the second generation of Zirconium alloys containing main alloy compositions of Nb, Sn and Fe have been used as a replacement of Zircaloy-4 (Zr-Sn-Fe-Cr), a first-generation Zirconium alloy, to meet severe and rigorous reactor operating conditions characterized by high-burn-up, high-power and high-pH operations. In this study, the mechanical properties and creep behaviors of Zr-Sn-Fe-Cr and Zr-Nb-Sn-Fe alloys were investigated in a temperature range of $450{\sim}500^{\circ}C$ and in a stress range of $80{\sim}150\;MPa$. The mechanical testing results indicate that the yield and tensile strengths of the Zr-Nb-Sn-Fe alloy are slightly higher compared to those of Zr-Sn-Fe-Cr. This can be explained by the second phase strengthening of the $\beta$-Nb precipitates. The creep test results indicate that the stress exponent for the steady-state creep rate decreases with the increase in the applied stress. However, the stress exponent of the Zr-Sn-Fe-Cr alloy is lower than that of the Zr-Nb-Sn-Fe alloy in a relatively high stress range, whereas the creep activation energy of the former is slightly higher than that of the latter. This can be explained by the dynamic deformation aging effect caused by the interaction of dislocations with Sn substitutional atoms. A higher Sn content leads to a lower stress exponent value and higher creep activation energy.

• Steel and Composite Structures
• /
• 제3권5호
• /
• pp.333-348
• /
• 2003

The behaviour of composite frame - shear wall systems with regard to creep and shrinkage with high beam stiffness has been largely unattended until recently since no procedure has been available. Recently an accurate procedure, termed the Consistent Procedure (CP), has been developed which is applicable for low as well as for high beam stiffness. In this paper, CP is adapted for a class of composite frame - shear wall systems comprising of steel columns and R.C. shear walls. Studies are reported for the composite systems with high as well as low beam stiffness. It is shown that considerable load redistribution occurs between the R.C. shear wall and the steel columns and additional moments occur in beams. The magnitude of the load redistribution and the additional moment in the beams depend on the stiffness of the beams. It is also shown that the effect of creep and shrinkage are greater for the composite frame - shear wall system than for the equivalent R.C. frame - shear wall system.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.373-378
• /
• 2000

The heat resistant material, in service, may experience static loading, cyclic loading, or a combination of two. An experimental study of crack growth behavior of STS 316L austenitic stainless steel under fatigue, and creep-fatigue loading conditions were carried out on compact tension specimens at various tensile hold times. In the crack growth experiments under hold times. In the crack growth experiments under hold time loading conditions, tensile hold times were ranged from 5 seconds to 100 seconds and its behavior was characterized using the $\Delta$K parameter. The crack growth rates generally increase with increasing hold times. However in this material, the trend of crack growth rates decreases with increasing hold times for short hold time range relatively. It is attributed to a decline in the cyclic crack growth rate as a result of blunting at the crack tip by creep deformation. The effect of grain size on the creep behavior of STS 316L was investigated. Specimens with grain size of 30, 65 and 125${\mu}{\textrm}{m}$ were prepared through various heat treatments and they were tested under various test conditions. The fracture mode of 316L changed from transgranular to intergranular with increasing grain size.

• 한국주조공학회지
• /
• 제37권4호
• /
• pp.101-107
• /
• 2017

This study investigated the effect of Pd on the microstructure, tensile and creep properties of Mg-4Al-2Sn (AT42) alloy at a high temperature for transportation-related industrial applications. AT42-xPd (x = 0, 1 and 2 wt. %) alloys were prepared using a permanent mould casting method. The microstructures of the as-cast alloys were characterized by the presence of the intermetallic phases $Mg_{17}Al_{12}$, $Mg_2Sn$ and $Al_4Pd$. The addition of Pd was found to improve the tensile properties of AT42 at room and at elevated temperatures, and to increase the creep resistance at elevated temperatures. A small amount of Pd could markedly improve the tensile properties of AT42 by means of grain-refinement and the dispersion of secondary phase strengthening. Moreover, the thermally stable phase $Al_4Pd$ effectively improves the creep resistance of AT42 due to the strengthened grain boundaries and the suppressed formation of $Mg_{17}Al_{12}$.