• 자동차안전학회지
• /
• 제13권4호
• /
• pp.106-113
• /
• 2021

In this study, The behavior of an autonomous vehicle in an intersection accident situation is predicted. Based on a representative intersection accident situation from actual intersection accident database, simulation was performed by applying the automatic emergency braking algorithm used in the autonomous driving system. Accident reconstruction was performed based on the accident report of the representative accident situation. After applying the autonomous driving system to the accident-related vehicle, the tendency of intersection accidents that may occur in autonomous vehicles was identified and analyzed.

• 한국간호교육학회지
• /
• 제19권1호
• /
• pp.52-59
• /
• 2013

Purpose: This study was performed to identify in nursing students the effects of simulation practice for hemorrhagic patients. Methods: Subjects were sophomore nursing students in Daegu (n=133). A self describing performance questionnaire which included knowledge, skill and attitude towards bleeding patients was given. Consent was received from students. The data was analyzed by ANOVA with Scheffe's test and Mann-Whitney U test using the SPSS 12.0 Program. Result: Subjective and objective knowledge and skill showed significant improvement in the control group, especially in assessment, correct medication administration, explaination of NPO and preparing the crash cart for a cardiac arrest. Objective knowledge and skill was significantly higher in the control group although attitude was not. Conclusion: Simulation practice was an effective education method for improving knowledge, skill and attitude in nursing students.

• 한국시뮬레이션학회논문지
• /
• 제23권4호
• /
• pp.151-161
• /
• 2014

군에서 향후 미래 위협에 대비한 군용 항공기의 적정 소요를 분석하는 일은 중요하다. 이전의 연구들은 작전 임무수행 측면과 전력지수의 비교를 통하여 적정 소요를 분석하였다. 이 방법들은 단편적인 항공기의 전투-효과 지수와 수량 측면에서의 비교만을 실시하였다. 그러나 본 연구에서는 시스템 다이내믹스를 통한 군용 항공기의 실제 운용 시나리오에 기반한 시뮬레이션 분석을 실시한다. 군용 항공기 운용 개념의 특성을 반영하여 하부 주요 시스템의 고장률과 수리율, 전 평시 차별적으로 발생하는 피격률을 통해 적정 소요량을 산출한다.

• 대한토목학회논문집
• /
• 제31권4D호
• /
• pp.539-546
• /
• 2011

자동차의 충돌해석은 다양한 형태로 구성되며, 충돌 중 차량에 작용되는 속도변화는 차량 간의 충돌정도나 차량 내에 탑승한 승객의 안전도를 평가하는 매우 중요한 요소로 활용된다. 이로 인해 충돌해석 시뮬레이션 프로그램을 활용한 속도변화의 결과치를 해석하는 방법들이 필요하게 된다. 그러나 다양한 충돌해석 시뮬레이션이 보급됨으로 인해 각 프로그램에 대한 신뢰성 평가가 요구되고 있다. 본 연구에서는 전혀 다른 물리적 접근방식을 채택하는 충돌해석 프로그램인 EDSMAC과 PC-CRASH프로그램을 활용하여 초기 입력조건 중 차량의 무게, 무게중심, 구름저항, 강성계수, 제동력 등 여러 충돌인자들을 일정한 범위 내에서 값을 변화시키면서 1차원 정면 및 2차원 측면직각충돌 실험을 수행하였다. 그리고 충돌인자들이 출력결과 값인 충돌 중 속도변화에 미치는 영향에 대해 알아보았다. 본 연구 결과, 두 시뮬레이션 프로그램 모두 차량의 무게, 무게중심, 제동력에 대해 동일한 속도변화의 패턴을 보였다. 차량의 강성계수는 EDSMAC에만 반응하였으며, 구름저항계수는 속도변화에 별다른 영향을 미치지 못하였다. 그러나 속도변화의 값에 대해서는 다소 상대적인 차이를 나타내었는데, 이는 각 시뮬레이션 프로그램에 고정된 물성치 값이 그대로 적용됨으로 인한 반응의 결과로 해석된다. 따라서 시뮬레이션 프로그램의 고정 값을 고려한 속도분석으로 교통사고 충돌해석에 대한 신뢰성을 향상시켜야 할 것이다.

• 자동차안전학회지
• /
• 제3권2호
• /
• pp.5-10
• /
• 2011

Under the full frontal crash event, seatbelt system is the most typical and primary restraint device that prevents the second impact between an occupant and vehicle interior parts by limiting the forward motion of an occupant in the vehicle occupant packaging space. Today's restraint systems typically include the three-point seat belt with the pretensioner and the load limiter. A pretensioner preemptively tightens the seat belts removing any slack between a passenger and belt webbing which leads to early restraint of a passenger. After that a load limiter controls level of belt load by releasing the belt webbing to reduce occupant injurys. In this study, load characteristics of load limiters are optimized by the computer simulation with a MADYMO model for a frontal impact against the rigid wall at 56kph and then we suggest performance requirements. We derived optimum load characteristic from the results using four vehicle simulation models represented by the vehicle. Based on the results, we suggest the performance from the results of the second optimization using the simulation considering the design and the standardization. Finally, the performance requirements is verified by the sled tests including the load limiter device for the full vehicle condition.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.710-713
• /
• 2005

Many impact or drop test researches of home appliances are published, but those of toys cannot be found easily. External impacts are the primary causes of fracture of toys. For impact proof design, the finished product should pass an impact test after molding design. There are several international toy safety standards or requirements such as US CPSC(Consumer Product Safety Commission), ASTM F963-96a, EN71 and so on. The puppy robot which patrols around the house, namely, the watchdog was selected to investigate toy safety because it has considerable weight and outer panels are made of plastics. First the model of watchdog robot was obtained by 3 dimensional scan. Surface data can be generated from 3D polygon data of the watchdog. A reliable drop simulation method for the watchdog was established using Pam-crash program according to Korean toy safety standards. When there is a low impact allowance value, the molding design should be reinforced or changed. It was found that the maximum impact stress reaches the ultimate stress of panel material.

• Computers and Concrete
• /
• 제17권2호
• /
• pp.201-214
• /
• 2016

The outer tank of a liquefied natural gas (LNG) storage tank is a longitudinally and meridianally pre-stressed concrete (PSC) wall structure. Because of the current trend of constructing larger LNG storage tanks, the pre-stressing forces required to increase wall strength must be significantly increased. Because of the increase in tank sizes and pre-stressing forces, an extreme loading scenario such as a bomb blast or an airplane crash needs to be investigated. Therefore, in this study, the blast resistance performance of LNG storage tanks was analyzed by conducting a blast simulation to investigate the safety of larger LNG storage tanks. Test data validation for a blast simulation of reinforced concrete panels was performed using a specific FEM code, LS-DYNA, prior to a full-scale blast simulation of the outer tank of a 270,000-kL LNG storage tank. Another objective of this study was to evaluate the safety and serviceability of an LNG storage tank with respect to varying amounts of explosive charge. The results of this study can be used as basic data for the design and safety evaluation of PSC LNG storage tanks.

• 한국자동차공학회논문집
• /
• 제13권4호
• /
• pp.8-18
• /
• 2005

Pedestrians involved in traffic accidents manifest unique trajectory characteristics depending on the collision speed, vehicle configuration, and pedestrian postures. However, the existing analytical models for pedestrian movements do not fully include the rotational characteristics of the pedestrians because they assume a two dimensional parabolic trajectory. This faulty assumption in the development of these models limits their applicability and reliability This study investigated the pedestrians movement at collision by computer simulation. The simulations are carried out by using HADYMO, which is a special simulation software system for dynamic movement analysis. Vehicles and pedestrians are modeled and verified via real crash worthiness experiments. Simulations are performed for various collision speeds, vehicle configuration, and pedestrian postures. Since the simulation uses multi-body dynamics, It can express irregular phenomena of the bodies quite well. The results can be exploited for vehicle design and traffic accident reconstruction.

• 한국도로학회논문집
• /
• 제19권6호
• /
• pp.13-21
• /
• 2017

PURPOSES : In this research, an SB3-level roadside barrier for a highway transition zone that meets the newly established guide Installation and Management Guide for Roadside Safety Appurtenance is developed. Its performance is evaluated by a numerical simulation and real-scale vehicle impact test. METHODS : The commercial explicit dynamic software LS-DYNA is utilized for impact simulation. An FE model of a passenger vehicle developed and released by the National Crash Analysis Center (NCAC) at George Washington University and a heavy goods vehicle (HGV) model developed by the TC226/CM-E Work Group are utilized for impact simulation. The original vehicle models were modified to reflect the conditions of test vehicles. The impact positions of the passenger vehicle and truck to the transition guardrail were set as 1/2 and 3/4 of the transition region, respectively, according to the guide. RESULTS : Based on the numerical simulation results of the existing transition barrier, a new structural system with improved performance was suggested. According to the result of a numerical simulation of the suggested structural system, two sets of transition barriers were manufactured and installed for real-scale vehicle impact tests. The tests were performed at a test field for roadside safety hardware of the Korea Highway Corporation Research Institute. CONCLUSIONS : The results of both the real-vehicle impact tests and numerical simulations of the developed transition barrier satisfied the performance criteria, and the results of numerical simulation showed good correlation with the test results.

• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.1063-1068
• /
• 2015

본 논문에서는 도시철도차량의 타고오름 평가를 위한 충돌시뮬레이션 기법을 제안하였다. 시뮬레이션모델은 대차의 동적 거동을 표현하는 대차 동역학 모델과 붕괴거동을 표현할 수 있는 차체 유한요소 모델로 구성된다. 유럽 및 국내 충돌안전규정의 타고오름 평가를 위해 40 mm 오프셋 정면충돌 사고 각본에 따른 시뮬레이션을 수행하여 충돌 후 차체의 구조적 거동과 차체와 연계된 대차 모델의 동적 거등을 확인하였으며 타고오름 판단기준인 윤축의 상승거리로 타고오름을 평가하였다. 최종적으로 본 연구에서 제안한 시뮬레이션 기법을 적용하면 도시철도차량 충돌안전규정에 따라 충돌사고 시 타고오름에 대하여 평가할 수 있음을 확인하였다.