• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.213-216
• /
• 2008

Sled test id widely used to evaluate the performance of occupant's safety system in frontal crash environment without having to conduct a full-scale crash test. Steel bar breaking system is used to generate deceleration profile which is experienced by passengers in frontal crash. In this study, deformation analyses of steel bars were conducted using a commercial FE code. Several guidelines were proposed to improve the accuracy of simulation.

• Journal of Power System Engineering
• /
• v.6 no.3
• /
• pp.42-48
• /
• 2002

Velocity change of crashed vehicle has been applied to assess the safety of passenger and degree of impact severity widely. In this study, 1 D crash analysis and 2 D crash analysis were performed for velocity change of crashed vehicle with HVE 2D, and factors used for these analysis are weight, C.G, roll resistance, stiffness and brake force which influence on velocity change of crashed vehicle. According to results, the velocity change of crashed vehicle was influenced by weight, center of gravity stiffness and brake force but not roll resistance.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.1
• /
• pp.5-9
• /
• 2014

Over the past ten years, since the introduction of the side crash test regulation in Europe, much research work has been performed internationally to develop new and modified test procedures to improve the level of occupant protection offered by vehicles in side crash test. This research has been co-ordinated and finally contributed to development of an AE-MDB(Advanced European Moving Deformable Barrier) and WorldSID (Worldwide Side Impact Dummy). EuroNCAP(European New Car Assessment Program) has the plan to conduct AE-MDB side crash test using WorldSID from 2015 by replacing Progressive MDB and EuroSID II. Automobile manufacturers need to respond to these changes closely. This paper is to find dominant control factor and analyze it of WorldSID 50%ile dummy injury through AE-MDB side crash test by predicting best and worst condition. And control factors will be validated within EuroNCAP regulations. This paper is analyzed by DFSS(Design for six sigma) which contains 5 control factors and is evaluated by ANOVA with the data as a result of LS-DYNA analysis correlated with crash pulse from 50 kph AE-MDB side crash test using WorldSID 50%ile dummy.

• Structural Engineering and Mechanics
• /
• v.53 no.1
• /
• pp.73-87
• /
• 2015

In case of aircraft impact on nuclear containment structures, the initial kinetic energy of the aircraft is transferred and absorbed by the outer containment, may causing either complete or partial failure of containment structure. In the present study safety analysis of BWR Mark III type containment has been performed. The total height of containment is 67 m. It has a circular wall with monolithic dome of 21m diameter. Crash analysis has been performed for fighter jet Phantom F4. A normal hit at the crown of containment dome has been considered. Numerical simulations have been carried out using finite element code ABAQUS/Explicit. Concrete Damage Plasticity model have been incorporated to simulate the behaviour of concrete at high strain rate, while Johnson-Cook elasto-visco model of ductile metals have been used for steel reinforcement. Maximum deformation in the containment building has reported as 33.35 mm against crash of Phantom F4. Deformations in concrete and reinforcements have been localised to the impact region. Moreover, no significant global damage has been observed in structure. It may be concluded from the present study that at higher velocity of aircraft perforation of the structure may happen.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.3
• /
• pp.407-415
• /
• 2022

In this study, a square rounding sidewalk block frame was developed considering the simplicity of construction and the superiority of aesthetics. In addition, it is possible to prevent damage, deformation, and settlement of adjacent sidewalk blocks due to plastic deformation during car impact load of installed bollad. A non-linear structural analysis was performed through finite element analysis to examine the performance of a car crash to which this was applied. Structural safety was confirmed through car crash simulation according to the direction of impact, and it is estimated that the function can be restored by replacing some parts in case of damage due to impact.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.485-493
• /
• 2016

This study analyzes the collision occurring in the daily life of the United States where diverse ethnicities live side by side, as portrayed in the film 'crash'. The analysis is followed by a counseling method necessary for a diverse society. To analyse the essence of conflict in the film, a convergence psychological analysis was conducted based on desire theory. The result was that the desire to survive and innovate always collided with frustration. This is because of the obstacles in real life that suppresses desire. The process of frustrated desires and their distortion was structurized. In the conclusion, a counseling method and theory with 'a recovery model that promotes change' was presented for problematic personalities that are entrenched widely in the United States about pain by conflict.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.173-180
• /
• 2016

OBJECTIVES : Fixed roadside objects are a threat to drivers when their vehicles deviate from the road. Therefore, such roadside objects need to be suitably dealt with to decrease accidents. This study determines the factors affecting the severity of accidents because of fixed roadside objects. METHODS : This study analyzed the crash severity impact of fixed roadside objects by using ordered probit regression as the analysis methodology. In this research, data from 896 traffic accidents reported in the last three years were used. These accidents consisted of sole-car accidents, fixed roadside object accidents, and lane-departure accidents on the national highway of Korea. The accident severity was classified as light injury, severe injury, and death. The factors relating to the road and the driver were collected as independent variables. RESULTS : The result of the analysis showed that the variables of the crash severity impact are the collision location (left side), gender of the driver (female), alcohol use, collision facility (roadside trees, traffic signals, telephone poles), and type of road (rural segments). Additionally, the collision location (left side), gender of the driver (female), alcohol use, collision facility (street trees, traffic signals, telephone poles), and type of road (rural segments), in order of influence, were found to be the factors affecting the crash severity in accidents due to fixed roadside objects. CONCLUSIONS : An alternative solution is urgently required to reduce the crash severity in accidents due to fixed roadside objects. Such a solution can consider the appropriate places to install breakaway devices and energy-absorbing systems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.3
• /
• pp.391-398
• /
• 2019

In general, truck-involved crashes increase severity in terms of both injury level and crash impact level. Recently, although the frequency and fatality of truck-involved crashes in Korea are rising, their associative studies are very limited. Therefore, the objective of this study is to identify critical factors influencing on injury severity of truck-involved crashes on Korean freeway system. To carry out this objective, this study uses an ordered probit model (OPM) based on a 6-year crash dataset from 2012 to 2017. From the analysis, eight variables were found to have a great effect on injury severity: older driver, crash speed, rear-end collision, number of vehicles involved, drowsy driving, nighttime (0:00 to 6:00) driving, overturn or rollover, and vehicle's fire after crash. However, injury severity was less severe in crashes under snowy condition and crashes to traffic facilities (i.e., crash alone).

• Transactions of Materials Processing
• /
• v.17 no.3
• /
• pp.210-217
• /
• 2008

The effects of blank shape on the safety of stamped parts are studied through the comparison of an optimal blank and the corresponding reference blank shape to show further advantage of the optimal blank. In order to carry out this study, stamping process has been analyzed and the forming history, e.g. accumulated effective strain and thickness has been incorporated in the crash analysis. The reference blank has been determined following to the actual industry guideline, and excessive material to the desired shape has been trimmed off before crash analysis for the objective comparison. Through the study, appreciable increase of impact safety has not been observed and the effective of blank shape is verified not to be significant.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.210-218
• /
• 2003

MDO (multidisciplinary design optimization) technology has been proposed and applied to solve large and complex optimization problems where multiple disciplinaries are involved. In this research. an MDO problem is defined for automobile design which has crashworthiness analyses. Crash model which are consisted of airbag, belt integrated seat (BIS), energy absorbing steering system .and safety belt is selected as a practical example for MDO application to vehicle system. Through disciplinary analysis, vehicle system is decomposed into structure subspace and occupant subspace, and coupling variables are identified. Before subspace optimization, values of coupling variables at given design point must be determined with system analysis. The system analysis in MDO is very important in that the coupling between disciplines can be temporary disconnected through the system analysis. As a result of system analysis, subspace optimizations are independently conducted. However, in vehicle crash, system analysis methods such as Newton method and fixed-point iteration can not be applied to one. Therefore, new system analysis algorithm is developed to apply to crashworthiness. It is conducted for system analysis to determine values of coupling variables. MDO algorithm which is applied to vehicle crash is MDOIS (Multidisciplinary Design Optimization Based on Independent Subspaces). Then, structure and occupant subspaces are independently optimized by using MDOIS.