• Journal of Korean Association for Spatial Structures
• /
• v.8 no.2
• /
• pp.22-28
• /
• 2008

• Journal of the KSME
• /
• v.35 no.6
• /
• pp.504-516
• /
• 1995

작년에 발생한 성수대교의 파손사고는 인적손실은 물론 경제적 그리고 사회적으로 심각한 영향을 미쳤다. 현재 수많은 공장에서 가동되고 있는 크레인 관련 시설들은 변동응력의 작용과 용접구 조물이라는 점에서 성수대교와 유사한 조건을 가지고 있다. 또한 그중에서 많은 부분은 설계시 에는 고려치 못했던 부하조건의 가혹화와 노후화 때문에 손상 가능성이 항상 존재하고 있다. 이러한 점을 고려하여 필자들은 설비의 예방정비 차원에서 크레인 거더 및 런웨이 거더의 안정성 평가에 주목하게 되었고 나름대로 얻은 경험을 지면에 정리하여 보았다.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.2 s.31
• /
• pp.237-248
• /
• 1997

Three types of fatigue cracks frequently observed in the crane runway girders are verified experimentally using two testing-purpose girders with the size of $6400{\times}600{\times}300$ in millimeters. The fatigue cracks are observed in the vicinity of load-bearing points, at the end of gusset plates and at the fillet welded joints between the lower flange and the web. The load-bearing-point cracks are initiated at the intersection of the fillet welds between the upper flange and the web, where the vertical stiffener is located. The cracks grow up toward the diagonal direction of the web. The cracks observed at the fillet welded joints grow up perpendicularly to the crane runway girder. Compared with the JSSC fatigue design code, the joint class is classified as follows: E for the vicinity of load-bearing points, G or H for the end of gusset plates and D for the lower fillet welded joints. The tests reveal that the class of joint classification at the end of gusset plates and at the lower flange coincides with the fatigue design code.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.2 s.35
• /
• pp.303-315
• /
• 1998

Four types of repair procedures are applied to the fatigue cracked crane runway gilders, which are stop-holes as crack arrester stop-holes reinforced with high strength bolts, welding repair and reinforcement with high strength bolted splices. The fatgiue cracks are reinitiated at the region where stop-holes and weld repairments are applied, while none of the cracks are observed in the cases of stop-holes reinforcement and reinforcement with high strength bolted splices. When using stop-holes and hole-reinforcement all repaired regions show a same fatigue strength to the one before the repairments. The experiments also reveal that the proper weldment is an essential factor when applying the welding repairement as a properly welding produces the same level of fatigue strength after the repairement. When the situation permits to use reinforcement with high strength boilted splices, the experiments shows the repairment is the best possible method among the procedures available.