• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.77-82
• /
• 2003

The ac loss is an important issue in the design of high-Tc superconducting power devices such as transformers and cables. In these devices many Bi-2223 tapes are closely stacked together and exposed to alternating magnetic fields that can have different orientations with respect to a tape. In such arrangement the magnetization loss is influenced by the screening current induced in adjacent tapes and thus different from that in a single tape. This stacking effect was experimentally investigated by measuring the magnetization loss in a stack, which consists of a number of tapes. First the magnetization loss in the single tape was measured in order to confirm the reliability of the loss data measured in the stack. The results for the single tape coincide well will the loss characteristics described in other previous works. For the stack In parallel and longitudinal magnetic fields the measured loss is Independent of both the number of tapes and stacking type. The longitudinal magnetization loss Is well explained rather by the slab model for decoupled filaments. For the tall stack in perpendicular field the measured loss at low fields is greatly decreased, compared to the loss of the single tape. However the loss at high fields is unaffected. These loss behaviors in the tall stack are well described by the slab model for full coupling.

• 한국통신학회논문지
• /
• 제8권4호
• /
• pp.164-171
• /
• 1983

본 논문에서는 비교적 짧은 계단형 멀티모우드 광섬유를 이용하여 여러 정보의 채널을 전송하는 광멀티플렉싱 기술인 각도분할방식(ADM: Angular Division Multiplexing)에 대해 논하였다. 평면파 입력에 대한 광섬유 내의 모우드 결합과 출력 파워 분포가 계산되었으며 시스템의 혼신도 결정이 제시되었다. 모우드 결합 하에서 광섬유의 길이와 입력조건에 따른 펄스폭이 평면 도파판과 광섬유에 대해 비교, 계산되었다. NA(Numerical Aperture)아래의 입력각에 대한 각도폭은 입력각이 클수록 줄어들었으며 출력은 입력각에 파워가 집중된 환형으로 나타났으며 이는 ADM시스템의 중요한 요인이 되었다.

• 콘크리트학회논문집
• /
• 제20권1호
• /
• pp.3-11
• /
• 2008

현재 국내에서 건설되고 있는 대부분의 아파트는 철근콘크리트 전단벽과 바닥슬래브만으로 구성된 순수벽식구조 형태를 이용하고 있다. 이러한 벽식 구조 아파트에 대한 리모델링시 개구부 설치는 필연적이며 개구부 설치치 벽체의 거동은 매우 복잡하며, 연결부재인 보와 슬래브 같은 부재에 많은 영향을 받는다. 본 연구에서는 개구부가 있는 전단벽에 대해 횡하중 실험을 실시하였다. 실험체는 1980년대에 지어진 벽식 구조아파트를 대상으로 1/2축소 실험체를 제작하였다. 개구부의 면적 및 연결 슬래브의 위험단면은 기존 연구를 참고하여 결정하였다. 실험 결과 개구부 설치에 따른 내력 감소가 나타났으며, 연결 슬래브의 응력은 전단면에 대하여 균일하게 작용하지 않았다. 전단벽체와 커플링 작용을 하는 슬래브의 유효폭 및 위험단면은 기존 연구와 비교하여 큰 차이점을 나타냈으며, 국내의 아파트에 적용하기에는 다소 과소평가되고 있는 것으로 나타났다.

• 한국통신학회논문지
• /
• 제28권2A호
• /
• pp.70-79
• /
• 2003

완전도체면 아래의 유전체와 측면 연마된 광섬유의 소산장 결합 및 전파특성에 대한 해석 연구 결과를 나타내었다. 두 구조에서의 전파특성과 소산장 결합 관계를 해석하기 위해 결합모드 방정식과 혼합 모드(compound-mode) 방정식을 이용하여 코아와 유전체의 굴절률 및 구조의 각 변수에 대한 특성을 나타내었다. 그리고 측면 연마된 광섬유와 완전도체면 아래의 유전체가 결합할 때 일어나는 광섬유에서의 감쇠현상을 비교하기 위하여 감쇠상수를 구하여 함께 비교하였다.

• ETRI Journal
• /
• 제25권6호
• /
• pp.535-537
• /
• 2003

We propose a rigorous 2D approximation technique for the 3D waveguide structures; it can minimize the well-known approximation errors of the commonly used effective index method. The main concept of the proposed technique is to compensate for the effective cladding index in the equivalent slab model of the original channel waveguide from the modal effective index calculated by the nonuniform 2D finite difference method. With simulations, we used the proposed technique to calculate the coupling characteristics of a directional coupler by the 2D beam propagation method, and the results were almost exactly the same as the results calculated by the 3D beam propagation method.

• Structural Engineering and Mechanics
• /
• 제2권2호
• /
• pp.211-225
• /
• 1994

Responses of asymmetrical multistorey buildings to earthquakes are obtained by quasi-static code approach and real time dynamic analysis, using two different structural models. In the first model, all vertical members are assumed to be restrained at the slab levels and hence their end rotations, about horizontal axes, are taken as zero. In the second model this restriction is removed and the rotation is assumed to be proportional to the lateral stiffness of the member. A simple microcomputer based procedure is used in the analyses, by both models. Numerical examples are presented where results obtained from both the models are given. Effects of modelling on the response of three buildings, each with a different type and degree of asymmetry, are studied. Results for deflections and shear forces are presented and the effects of the type of model on the response are discussed.

• ETRI Journal
• /
• 제17권2호
• /
• pp.1-10
• /
• 1995

We propose a novel planar optical interconnection scheme for 100 Gb/s optical packet address detection, which consists of waveguide grating couplers and a diffractive microlens integrated on a glass substrate 3-dimensionally. Length and duty cycle of the grating couplers have been determined on the bases of the ray-optic propagation-mode analysis in a slab waveguide and of the rigorous coupled-wave diffraction analysis for out-coupled radiation-modes. The 3-dimensionally integrated planar optics makes it possible to connect each address bit-signals of $TE_ 0-waveguide$ mode to the detector with a power uniformity of 6.4 % and a total coupling efficiency of 72.3 %.

• KIEAE Journal
• /
• 제9권6호
• /
• pp.81-87
• /
• 2009

The purpose of the present study is to establish structural noise analyzing method for apartments building floor with structural-acoustic coupling analysis modeling. Noise through floor in the room is recognized as a significant problem with the consequence that noise isolation technique has been studied in the various fields of industry. From among noise factors, resonance sound is the main reason for solid noise of the floor, which is occurred by mechanical vibrations of the acoustic boundary line and the change of velocity. To analyse this phenomenon, numerical computation methods are provided in many fields, In this study, evaluation method for slab is established using finite element method, and a case study for analyzing acoustic phenomenon was suggested. The results show that numerical method, especially F.E.M, has a good approximation to predict noise at floors.

• 대한전자공학회논문지
• /
• 제23권4호
• /
• pp.522-528
• /
• 1986

Based on the modified effective index method, analysis of dielectric rectangular waveguides and directional couplers are presented. Aside from the effective index concept of channel region, the equivalent index concept of cladding region is proposed. The error problem of eigenvalues, which has been experienced when the effective index method is used, is improved. Our approxiamtions give similar accuracy when compared with the results of other regorous approxiamtion techiniques. The advantage of the modified effective index methods is utilized by replacing the directional coupler with the equivalent slab guides, and the coupling constant is calculated by the coupled mode theory. The effectiveness of the equivalent index concept is positively confirmed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.76-76
• /
• 2008

The resonance properties due to the surface plasmon(SP) excitation of metal nanoparticles make the nanocomposite films promising for various applications such as optical switching devices. In spite of the well-known ultra-sensitive operation of optical switches based on a guided wave, the application of nanocomposite film(NC) has inherent limitation originating from the excessive optical loss related with the surface plasmon resonance(SPR). In this study, we addressed this problem and present the experimental and theoretical analysis on the pump-probe optical switching in prism-coupled Au(1 vol.%):$SiO_2$ nanocomposite waveguide film. The guided mode was successfully generated using a near infrared probe beam of 1550 nm and modulated with an external pump beam of 532 nm close to the SPR wavelength. We extend our approach to ultra-fast operation using a pulsed laser with 5 ns pulse width. To improve the switching speed through the reduction in thermal loading effect accompanied by the resonant absorption of pump beam light, we adopted a metallic film as a coupling layer instead of low-index dielectric layer between the high-index SF10 prism and NC slab waveguide. We observed great enhancement in switching speed for the case of using metallic coupling layer, and founded a distinct difference in origin of optical nonlinearities induced during switching operation using cw and ns laser.