• Elastomers and Composites
• /
• v.26 no.2
• /
• pp.115-122
• /
• 1991

Polychloroprene rubber was moisture-cured after treating them with silane coupling agents such as 3-mercaptopropyltrimethoxysilane(MPS), 3-methacryloxypropyltrimethoxysilane(MAS) and vinyltriethoxysilane(VES), especially MPS. The cure reaction is composed of two steps. The first is the reaction between chlorine atoms of CR and silane coupling agents. The second is the formation of cross-links which are siloxane linkage. The linkage is formed by the condensation of silanol groups which are produced by the hydrolysis of alkoxysilyl groups. The first reaction was kinetically studied and the reactivity of CR to silane coupling agents was determined in previous literature. Crosslinking density and mechanical properties of the moisture-cured elastomer filled with silica or non-filled were studied and the feasibility of this cure system was discussed.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.11
• /
• pp.1810-1818
• /
• 2015

For the synthesis of various pharmaceuticals, chiral alcohols are useful intermediates. Among them, (R)-ethyl-4-chloro-3-hydroxybutanoate ((R)-ECHB) is an important building block for the synthesis of L-carnitine. (R)-ECHB is produced from ethyl-4-chloro-3-oxobutanoate (ECOB) by a reductase-mediated, enantioselective reduction reaction. The Saccharomyces cerevisiae YOL151W reductase that is expressed in Escherichia coli cells exhibited an enantioselective reduction reaction toward ECOB. By virtue of the C-terminal His-tag, the YOL151W reductase was purified from the cell-free extract using Ni²⁺-NTA column chromatography and immobilized onto Ni²⁺-magnetic microparticles. The physical properties of the immobilized reductase (Imm-Red) were measured using electron microscopy, a magnetic property measurement system, and a zeta potential system; the average size of the particles was approximately 1 μm and the saturated magnetic value was 31.76 emu/g. A neodymium magnet was used to recover the immobilized enzyme within 2 min. The Imm-Red showed an optimum temperature at 45℃ and an optimum pH at 6.0. In addition, Bacillus megaterium glucose dehydrogenase (GDH) was produced in the E. coli cells and was used in the coupling reaction to regenerate the NADPH cofactor. The reduction/oxidation coupling reaction composed of the Imm-Red and GDH converted 20 mM ECOB exclusively into (R)-ECHB with an e.e._p value of 98%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1566-1571
• /
• 2007

Oligodeoxyribonucleotide bearing the di-acetylenic linkage has been prepared. Staring from 5-Iodo-2'-deoxyuridine(1), a four-step sequence, consisting of the Pd(0)-catalyzed Heck-type C-C coupling with acetylenic group, protection of 5'-hydroxy group, generation of acetylenic hydrogen, and Glaser oxidative coupling reaction leads to the dimeric oligodeoxyribonucleotide(5).

• Journal of the Korean Chemical Society
• /
• v.16 no.3
• /
• pp.166-177
• /
• 1972

This paper reports the reaction of monoiodoperfluorocycloakense with alkyl lithium and activated copper repectively resulting in various coupling products. Of particular interests are compounds of the following composition. The physical properties of the various compounds are given along with a discussion relating to the mechanistic pathways involved in the coupling reactions.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.989-996
• /
• 2007

In this study, abiotic transformation of 1-naphthol(1-NP) via oxidative-coupling reaction and its reaction products were investigated in the presence of Mn oxides. The reaction products were characterized for their relative polarity using solvent extraction experiment and reverse-phase HPLC, and for structure using CCMS and LC/MS, and for absorption characteristics using UV-Vis spectrometry. The reaction products present in aqueous phase were more polar than parent naphthol and comprised of 1,4-naphthoquinon(1,4-NPQ) and oligomers such as dimers and trimers. Hydrophilic component present in water phase after solvent$(CH_2Cl_2)$ extractions was identified as naphthol polymerized products having molecular weight(m/z) ranging from 400 to 2,000, and showed similar UV-Vis. absorption characteristics to that of foil fulvic acid. Transformation of 1,4-NPQ, which is non-reactive to Mn oxide, to the polymerized products via cross-coupling reaction in the presence of 1-NP was also verified. In this experimental conditions(20.5 mg/L, 1-NP, 2.5 g/L $MnO_2$, pH 5), the transformation of 1-NP into the oligomers and polymerized products were about 83% of initial 1-NP concentrations, and more than 30% of the reaction products was estimated to be water insoluble fractions, not extracted by $H_2O$ methanol. Results from this study suggest that Mn oxide-mediated treatment of naphthol contaminated soils can achieve risk reduction through the formation of oligomers md polymer precipitation.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.29-30
• /
• 2004

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.7
• /
• pp.2213-2222
• /
• 1996

This paper presents the design process and evaluaation results of a two-axis force transducer for measuring flange reaction forces. A double-cantilever beam structure is used as a sensing element, and its optimal configuration is determined based on the derived strain equations to maximize the sensitivity and minimize the regid body displacements. To reduce the coupling errors between two-axis forces, strain distributions by finite elemetns analysis are utilized and the Wheaststone bridge cricuits composed of strain gages are built such that the output voltage should be zero, although strains of four strain gages are not zero. Calibration test shows that the two-azxis force transducer developed in this paper is useful in measuring flange reaction forces within the coupling error of 5.53%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.10
• /
• pp.873-877
• /
• 2007

In order to apply a complex multilayer chip LC filter, this study has estimated the interfacial reaction and coupling properties of dielectric materials $Pb(Fe_{1/2}Nb_{1/2})O_3$ and Ni-Zn-Cu ferrite materials through low-temperature co-sintering (LTCS). PFN powders were fabricated using double calcinated at $700^{\circ}C$ and then $850^{\circ}C$. While the perovskite phase rate was found to be 91 %, after heat treatment at $900^{\circ}C$ for 6h, the perovskite phase rate and density exhibited a value of 100 % and 7.46$g/cm^3$, respectively. The PFN/Ni-Zn-Cu ferrite, PFN/CUO (or $Pb_2Fe_2O_5$) and ferrite/CuO (or $Pb_2Fe_2O_5$) were mechanically coupled through interfacial reactions after the specimen was co-sintered at $900^{\circ}C$ for 6 h. No intermediate layer exists for the mutual coupling reaction. This result indicates the possibility of low-temperature co-sintering without any interfacial reaction layer for a multilayer chip LC filter.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.4
• /
• pp.209-212
• /
• 1999

Using an H-type divided cell, reductive coupling reaction of nitroarene toward azobenzenes in a mild condition was successfully accomplished by the controlled potential cathodic electrolysis reaction. Optimum reaction potential of each reaction was determined based on cyclic voltammetric behavior in methanol solution at Pb or Pt cathode, and Pt anode. In most cases, reductive coupling reactions were successful with excellent yields regardless of the position and the character of the substituents.

• YAKHAK HOEJI
• /
• v.37 no.6
• /
• pp.615-620
• /
• 1993

The cross-coupling reaction of organo tin reagents with a variety of organic halides, catalyzed by palladium, provides a novel method for generating a carbon-carbon bond. We used this method for the antibacterial agents, and synthesis of new quinolone derivatives which have carbon-carbon bond at C-7 position of general quinolone moieties. Aryl tin, quinolone moieties, and palladium catalyst were refluxed in DMF to afford new quinolone derivatives. This palladium catalyzed coupling reactions have capacity for further synthetic elaboration.