• Journal of Information Technology Services
• /
• v.11 no.1
• /
• pp.197-210
• /
• 2012

This paper presents the ways that can improve the Software Cost Estimation Guidelines in order to replace those that are expected to be abolished at February, 2012, and solve the problems that are being occurred in the current Software Cost Estimation Guidelines. By using multidimensional modeling of OLAP(On-Line Analytical Processing), this paper does three dimensional modeling that considers the product/service view, process view and skill view. Also, it presents the identification method of cost estimation data through the view of each dimension. Furthermore, it defines the software cost estimation process and adapts them into the bottom up estimation and the top down estimation. Finally, it proposes the access of cost estimation data by the multidimensional analysis of OLAP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.743-750
• /
• 2000

In this paper, low-power block filtering architecture for digital If down sampler and up sampler is proposed. Software radio technology requires low power and cost effective digital If down and up sampler. Digital If down sampler and up sampler are accompanied with decimation filter and interpolation filter, respectively. In the proposed down sampler architecture, it is shown that the parallel and low-speed processing architecture can be produced by cancellation of inherent up sampler of block filter and down sampler. Proposed up sampler also utilizes cancellation of up sampler and inherent down sampler of block filtering structure. The proposed architecture is compared with the conventional polyphase architecture.

• 전기의세계
• /
• v.13 no.2
• /
• pp.66-68
• /
• 1964

전력기술은 전력의 생산, 수송, 배급, 이들에 필요한 기구의 성능 또는 설비계통, 즉 전력계통의 계획, 운용기구설비의 설계, 제작의 광범위에 미치나, 여기에서는 특히 전력의 생산과 운송, 즉 발전과 송변전 관계에 대하여 간단히 기술하여 보겠고, 원자력발전에 대하여는 차기회로 미루겠다. 전력기술의 최종목표는 공급점에서의 전력 cost의 저감에 있으나, 전력의 공급은 공익적이며 공공적인 성격이 강한것이므로 그 공급의 확보, 공급조건(전압, 주파수등)의 유지, 공공보안, 타기업과의 합리적 협조등을 유지하면서 cost down이 목표이므로 이를 대분하면 광의의 원가의 저감, 공급의 확보, 보안의 유지 등이라 볼 수 있으며, 전력 cost는 자본비, 연료비, 일반경비로 구분할 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.616-619
• /
• 2004

As interests Un virtual reality being increased, the importance of HCI(Human computer interaction) field using gesture is also increased. However, in the preceding gesture recognition, the requirement of high-cost peripheral equipments limits users right. In this paper we suggest that through using low cost of USB PC-camera users are allowed to have more flexibly and cost down so that it can be adopted much commonly.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.2
• /
• pp.109-118
• /
• 2016

IPS(Ideal Production System) is a strategic cost management establishing ideal target cost, innovating cost structure and reduction. However, IPS was commonly used in assembly industry acquiring components and using them to assemble vehicles etc. Applying IPS to steel industry is a new try and not easy because cost elements in flow manufacturing are clustered and obfuscated in a complicated way. This paper proposes ICM (Ideal Cost Management) method adaptive to steel industry. One of the biggest advantages is that ICM could classify and categorize costs in detail according to accounts and manufacturing machines. Based on ICM information, steps of extracting and maximizing ideas are followed effectively. From 2013, ICM was applied successfully to POSCO Pohang Steel Works 38 factories.

• Korean Journal of Poultry Science
• /
• v.21 no.4
• /
• pp.257-266
• /
• 1994

Three protein feeding systems for egg-type pullets involving conventional step-down protein 18-15-12%), step-up protein(12-15-18%) and single-stage low protein (13-13-13%) with an iso-energy level of 2,900 ME kcal /kg were compared to examine the effect on pullet growth and subsequent laying performance. During the growing period, pullets subjected to the step-up and single-stage low protein feeding systems were lighter in body weight and consumed less feed and netabolizable energy than those on the conventional step-down protein feeding system(P<0.05). 3ut the pullets on the step-up protein diet consumed more protein, and those on the single-stage low protein diet consumed less protein than those on the step-down protein diet(P<0.05). Also, he feed cost was less in pullets on the single-stage low protein diet than in those on the other systems(P<0.05). During the laying period, sexual maturity was later in hens reared on the step-up and single-stage low protein diets than in those on the step-down protein diet(P<0.05), however, average hen-day egg production and egg weight were not significantly affected by the protein feeding systems in the growing period. Daily feed intake and feed required per egg were significantly reduced in hens on the single-stage low protein diet compared to those on conventional protein feeding system(P<0.05). It was concluded that the 13% single-stage low protein feeding system produced smaller pullets with less feed, energy, protein, and feed cost during the growing period, and hens reared on that system consumed less feed during the laying period without any impairment of production compared to the conventional rearing system.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.607-612
• /
• 2006

A pressure-type rapid automatic filter of 2000mm diameter and 170 ton/h filtering capacity was fabricated. In case of no external impurity inflow, the turbidity removal efficiency on raw water was experimented and the numbers of impurities of each sizes were analyzed by particle counter. As the result of circulated filtering, the raw water of 40 NTU was filtered to 0.44 NTU and the numbers of impurities above $1{\mu}m$ were removed by approximately 95%. With the filtering efficiency experimented and the mathematical method, the turbidity change of circulation water were calculated according to the inflow rate of external impurity and water treatment method of blow-down or filtering. The cost of blow-down water was calculated from above results. And simple payback period for this filter is calculated as about one year. Nowadays, as the cost of water is continuously increasing and environment regulations will be more strict, the water quality control using this filter will be expected to satisfy the user requirement.

• Journal of Biosystems Engineering
• /
• v.6 no.2
• /
• pp.65-76
• /
• 1982

This survey was conducted to investigate the status of repair and maintenance of 4 wheel tractor for a basic reference to the improvement of quality and proper utilization of tractors. Thirty two counties from eight provinces, except Jeju, were covered in this study in order to investigate annual break-down and repair of tractor in 1980. The analyzed results are summarized as follows; 1. The average number of break-down of large size tractors(47ps) was 5.0 times in a year and it was about twice of that of small size tractors(19-23ps). The break-down frequency per 100 hours of use was 1.11 times in the large size and 0.65 times in the small size tractors. 2. 75.6 percent of total break-down was occured in main body of tractor and 24.4 percent in attachments. In particular, the break-down of plow and rotavator was more than 80 percent of total break-down of the small size tractor attachments. 3. The large size tractors which were occured more than one times of break-down a year was 75 percent and its rate of the small size tractor was 62 percent. But 9 percent of tractor surveyed had more than ten times of break-down in a year 4. The frequency of break-down had a peak in May, and it was directly proportional to the hours of use. 5. The causes of break-down were poor maintenance and operation by 29.8 precent, old parts by 30.2 percent, poor quality of parts by 20.6 percent, poor field condition by 16.3 percent and others by 3.1 percent. 6. Annual number of repair was 5.5 times and among them 55.6 percent was done by shop and 44.4 percent by operator. 7. Total required repair time was 30.6 hours a year in the large size tractor and 19.9 hours in the small size tractor. Average repair time was 3.62 hours a time. 8. Annual repair cost was 278 thousand won in the large size tractor and 70 thousand won in the small size tractor. The repair cost per hour of use was 621 won in the large size and 198 won in the small size tractor. 9. The repair cost rate of tractor(Y) was regulated with tractor age (X) as follow; Y=0.752X In case of the service life of tractor was 10 years, the total repair cost rate was 64 percent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.801-807
• /
• 2012

In this paper, design and implementation of frequency down converter based on LC filter technic. Single frequency down converter, designed a low-noise amplifier, mixer, IF amplifier, LC filter was configured. And it is composed of DC block capacitors and RF bypass capacitor. LC filter, replace it with the IC reduced the power and realized low cost. The gain of single down converter is about 10dBm and realized by 18MHz bandwidth at 70MHz band.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.366-370
• /
• 2003

This paper introduces a new design and fabrication technology of 28 GHz low-cost up and down converter modules for digital microwave radios, The design of the converter module is based on unit circuit blocks, which are to be characterized using a special test fixture. Based on the cascade analysis of the module the 28 GHz up and down converter modules have been designed and implemented. The measured module performance agrees with the cascade analysis. New components such as a tapped edge-coupled filter and a new Ka-band waveguide-to-microstrip transition, which are less sensitive to fabrication tolerances, have been used in the module implementation.