• Journal of Korean society of Dental Hygiene
• /
• v.7 no.4
• /
• pp.455-470
• /
• 2007

The usage of appropriate disinfectants is essential for infection control in dental hospitals, dental clinics. Inadequate use of disinfectants is the cause of human or environmental toxicity and is a waste of cost. This study was aimed to assess the level of knowledge on the disinfection and chemical disinfectants among dental workers in dental hospitals, dental clinics. It's ultimately intended to serve as a basis for the preparation of more effective, appropriate educational programs on the disinfection and manuals on the use of disinfectants for dental workers. This study enforced a questionnaire with 184 dental workers employed in dental hospitals, dental clinics from 15 Aug. to 15 Sep. 2007, in the area of Daejeon. The obtained result were as follows; 1. The population sociological feature of dental hospital and dental clinic showed that significant differences of dental service career(pM0.039). Dental service career of dental workers shows; below 3 years 42.9%, 4~6 years 34.7%, more than 7 years 22.4% in dental hospitals, below 3 years 30.4%, 4~6 years 26.7%, more than 7 years 43.0% in dental clinics(pM0.039). 2. The average score of dental workers knowledge in 'Critical item soaks in high-level disinfectants for 20minutes was 2.73V0.49 point, got from knowledge of dental instrument is appropriate to immerse before sterilization in the dental device disinfection(pM0.002). 3. In the general disinfection which it follows in education experience of chemical disinfectants direction for use, 'Direction for use by Spaulding process classification' responded that the correct answer was the education experience dental workers 60.0%, the education non-experience dental workers 39.5%(p=0.026). 4. In the dental device disinfection which it follows in education experience of chemical disinfectants direction for use. 'High level disinfection is not applied for the non-critical items and equipment' responded that the education experience dental workers 49.2%, the education non-experience dental workers 31.9%(pM0.045), 'Semi-critical items is applied same method in presence of the infection disease which it acts responded that the education experience dental workers 44.6% answer back, the education non-experience dental workers 24.4%(pM0.017). 5. 'A hand disinfectants of anticeptics have effect' the education experience dental workers 78.5% answer back, the education non-experience dental workers 52.9%(pM0.003). 1t uses with hand disinfectants when the instruments which be imbrued and patient contact', the education experience dental workers 78.5% answer back, the education non-experience dental workers 62.2%(pM0.026), 'Boric acid solution uses for the skin disinfectants the education experience dental workers 52.3% answer back, the education non-experience dental workers is 37.0%(pM0.016), 'Gluconate have effective difference which it follows in chemical disinfectant consistency and the solution type' education experience dental workers 72.3% answer back, education non-experience dental workers 47.9%(pM0.004). 6. The education experience dental workers were appeared higher than the education non-experience dental workers in knowledge of the disinfection and chemical disinfectants. Consequently system and the specialty education which is standardized continuously must be provided to all dental workers.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.67-71
• /
• 2013

$FeCl_3$ has been used as an etchant for metal etching such as Fe, Cu, and Al. In the process of metal etching, $Fe^{3+}$ is reducted to $Fe^{2+}$ and the etching rate becomes slow and etching efficiency decreased. Waste $FeCl_3$ etchant needs to be regenerated because of its toxicity and treatment cost. In this work, HCl was initially mixed with the waste $FeCl_3$ and then, strong oxidants, such as $O_2$ and $H_2O_2$, were added into the mixed solution to regenerate the waste etchant. During successive etching and regeneration processes, oxygen-reduction potential (ORP) was continuously measured and the relationship between ORP and etching capability was investigated. Regenerated etchant using a two vol% HCl of the total etchant volume and a very small amount of $H_2O_2$ was very effective in recovering etching capability. During the etching-regeneration process, the same oxygen-reduction potential variation cannot be repeated every cycle since concentrations of $Fe^{2+}$ and $Fe^{3+}$ ions were continuously changed. It suggested that the control of etching-regeneration process based on the etching time becomes more efficient than that of the process based on oxygen reduction potential changes.

• Journal of Biosystems Engineering
• /
• v.26 no.1
• /
• pp.21-28
• /
• 2001

Major deficiencies of current automation scheme including various robots for bioproduction include the lack of task adaptability and real time processing, low job performance for diverse tasks, and the lack of robustness of take results, high system cost, failure of the credit from the operator, and so on. This paper proposed a scheme that could solve the current limitation of task abilities of conventional computer controlled automatic system. The proposed scheme is the man-machine hybrid automation via tele-operation which can handle various bioproduction processes. And it was classified into two categories. One category was the efficient task sharing between operator and CCM(computer controlled machine). The other was the efficient interface between operator and CCM. To realize the proposed concept, task of the object identification and extraction of 3D coordinate of an object was selected. 3D coordinate information was obtained from camera calibration using camera as a measurement device. Two stereo images were obtained by moving a camera certain distance in horizontal direction normal to focal axis and by acquiring two images at different locations. Transformation matrix for camera calibration was obtained via least square error approach using specified 6 known pairs of data points in 2D image and 3D world space. 3D world coordinate was obtained from two sets of image pixel coordinates of both camera images with calibrated transformation matrix. As an interface system between operator and CCM, a touch pad screen mounted on the monitor and remotely captured imaging system were used. Object indication was done by the operator’s finger touch to the captured image using the touch pad screen. A certain size of local image processing area was specified after the touch was made. And image processing was performed with the specified local area to extract desired features of the object. An MS Windows based interface software was developed using Visual C++6.0. The software was developed with four modules such as remote image acquisiton module, task command module, local image processing module and 3D coordinate extraction module. Proposed scheme shoed the feasibility of real time processing, robust and precise object identification, and adaptability of various job and environments though selected sample tasks.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.5
• /
• pp.1-13
• /
• 2017

Recently, due to worldwide industralization and urbanization, natural environment has been severly damaged and global warning is worsening. Heat wave, torrential rainfall, typhoon and other natural disasters continuously occur due to global warming. Policies such as carbon emission regulation are taken into effect to solve such problems. Such global trend has affected interest to natural ecosystem and developed as a concept of ecosystem-services. This study particularly focused on ground water storage capacity among various ecosystem-services such as climate control and soil formation. It is because Korea suffers from drought and flood every year. Therefore, this study aims to understand objective numerical value of ecosystem-services value regarding ground water storage capacity of biotop classes based on relationship among precipitation, amount of evapotranspiration, and runoff of 7 regions of Chilgok-gun, Gyeongsangbuk-do and to convert the value into economic value. The study calculated ground water storage capacity based on relationship among precipitation, amount of evapotranspiration, and run off. Calculated amount of each capacity was 29.26 million ton($30.2mm/m^2$), 430.46 million ton($140.4mm/m^2$), 11.30 million ton($150.1.0mm/m^2$), 33 milion ton($3.0mm/m^2$). Economical value of ecosystem-service by each biotop classes appeared 4,128,800 thousand KRW ($21.32KRW/m^2$) for agricultural biotop, and 60,403,600 thousand KRW ($98.52KRW/m^2$) for forest biotop, 1,572,800 thousand KRW ($104.4KRW/m^2$) for grassland biotop, and 47,600 thousand KRW ($2.18KRW/m^2$) for bare ground biotop. The result of this study like above, it will be used as important evidentiary material to preserve natural resource effectively from various development business and policies that damages natural eco-system. Also, it is judged that ecosystem-service value by each land coverage will be used as important material for preparing legalistic institution such as establishing natural environment preservation plan, budget for alternative forest resource creation cost.

• Smart Media Journal
• /
• v.9 no.2
• /
• pp.16-21
• /
• 2020

Recently, mobile traffic is increasing exponentially as major traffic is transferred to IoT and visual media data in the dissemination of mobile communication terminals and contents use. In order to overcome the limitations of the existing LTE system, 5G mobile communication technology (5G) is a technology that meets 1000 times data traffic capacity, 4G LTE system acceptance, low latency, high energy efficiency, and high cost compared to 4G LTE system. The path loss due to the use of the frequency domain is very high, so it may be difficult to provide a service compared to the existing 4G LTE system. To overcome these shortcomings, various techniques are under study. In this paper, small cell technology is introduced to improve the system performance of 5G mobile communication systems. The performance is analyzed by comparing the results of small cell technology application, macro communication and small cell communication, and the results of the proposed algorithm application for power control. The analysis results show that the use of small cell technology in the 5th generation mobile communication system can significantly reduce the shadow area and reduce the millimeter wave path loss problem.

• Atmosphere
• /
• v.21 no.1
• /
• pp.1-16
• /
• 2011

Numerical prediction capability has been improved over the decades, but progress of prediction for high-impact weather (HIW) was unsatisfactory. One reason of low predictability for HIW is lack of observation data. The National Institute of Meteorological Research (NIMR) has been performed observation program for improvement of predictability, and reduction in social and economical cost for HIW. As part of this observation program, summer intensive observation program (ProbeX-2009) was performed at the observation-gap areas from 25 August to 6 September 2009. Sounding observations using radiosonde were conducted in the Gisang2000 research vessel (R/V) from the Korea Meteorological Administration (KMA) over the West Sea and the Eardo R/V from the Korea Ocean Research and Development Institute (KORDI) over the South Sea. Observation System Experiment (OSE) is carried out to examine the effect of ProbeX-2009 data. OSEs using Korea Local Analysis and Prediction System (KLAPS) and Weather Research and Forecasting (WRF) Model are conducted to investigate the predictability for a short time forecast. And, OSEs using WRF/3DVAR system and WRF forecast model are conducted to study the predictability for an extended time. Control experiment (K_CTL and CNTL) used only GTS observation and experiment (K_EXP and SWEXP) used ProbeX-2009 data from two system are performed. ETS for 3hr accumulated rainfall simulated by KLAPS-WRF shows that K_EXP is higher than K_CTL. Also, ETS for 12hr accumulated rainfall of SWEXP from 3DVAR-WRF is higher than CNTL. The results indicate that observation over the ocean has positive impact on HIW prediction.

• Journal of Home Health Care Nursing
• /
• v.5
• /
• pp.20-31
• /
• 1998

The purpose of this study was to develop the framework of community-based home care nursing delivery system, and to examine the validity of it. For these, home care nursing study team of College of Nursing, Seoul National University has studied home care nursing system since September, 1996, and has operated home care center since August, 1997. This study has been supported by the Korean Sience Foundation. We organized Committee of rules, and Clinical specialist consultant group for more efficient running of the home care center. In nursing station, research assistant controlled general work, and 5 home care nurses were hired for home visiting. We developed the Standards for operations, that included criteria for clients, central supply system of nursing materials, central management of nursing care cost, advertisement, patient referral system, and so forth. In our center, 108 patients enrolled, and neurologic disorders including cerebrovascular accident, and cancer were the most prevailing diseases. We tried to overcome the limitations of hopital -based home care, and to provide more accessible, efficient, safe, and stable home care nursing. Therefore, we were referred clients from patients and families, public health care center, industries, as well as from hospitals. Meanwhile, we developed home care recording system and assessment-intervention algorithm for various diseases for quality control and standardization. Also, we did continuing education, and tried to detect problems and to find solutions by regular meeting between the committee of rules and home care nurses. As the results of this study, several limitations of operation were found. First, it was difficult to manage and communicate with the doctor in the emergency situation, Second, we spent too much time for trasnsportation, because only five nurses covered all areas of Seoul and nearby cities. Third, preparation for special care of home care nurses were lacked. Forth, criteria for termination of care and frequency of home visit were ambiguous. Fifth, some difficulties were found in retrospective payment system. And finally, interconnection with home care machinery company were needed. Strategies for solving these problems were suggested.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.232-239
• /
• 2001

Young Jong Grand Bridge is approach traffic road of New Inchon International Airport which covers hub airport function in northeast asia. The total span length of this bridge is $4,420{\cal}m$ and this main bridge type is, the first in the world, Double Deck Self Anchored Suspension Bridge, designed as double deck systems to be arranged by road and railroad. Approach bridges to be connected with main span also are composed double deck steel truss and steel box girder to consider a continuity with this span. Our company erected $1,375{\cal}m$(about 60,000tons) of double deck steel truss bridge type which is composed by 6 traffic lane on upper deck and 4 traffic lane and Double track railroad on lower deck. The original installation method of this bridge was planed to install about 75 meters bridge blocks to use floating crane, after temporary bent was constructed between permanent piers. But this method which had to construct many temporary bents in the sea had the matter that construction periods can become lengthen and construction cost can be risen. To overcome the uncertainty to ensure high qualify of bridge and economic project execution, our company developed new bridge erection method to assure both quality control and economic construction work. The new erection method which was developed by us was one that could transport and install long bridge block, $120{\cal}m$ unit at a time and that temporary bent was not required. We hope that this paper is used as technical data which will erect bridge in the western sea and others marine region.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.5
• /
• pp.480-486
• /
• 2005

Since the year 2000, lung cancer has become the leading cause of cancer death in South Korea as in many other parts of the world. The current multidisciplinary approach for lung cancer includes a wide range of modalities, not only surgery, radiotherapy, medical drug therapy but also pain control, as well as social and psychological support. Therefore, thoracic surgeons, radiologists, nuclear medicine specialists, anesthetists, psychologist, nurses and social workers as well as medical doctors care for lung cancer patients. Sharing a common treatment protocol and optimal communication are vital aspects of shared care both from a medical and cost-effectiveness point of view. We developed a shared electronic medical record (SEMR) for treating patients with lung cancer in a university hospital to facilitate the sharing protocols and communications between doctors involved in a lung cancer clinic. A SEMR system was developed within a order communication system(OCS) for a lung cancer clinic. The records of radiological, laboratory and pathological studies as well as the records of surgery, chemotherapy, and radiotherapy were stored and presented to all doctors who treat the same patient. Every doctor was allowed to change his/her own records. They could review other doctor s records but could not alter them. With the SEMR, it was expected that the time to complete the medical records for one patient could be reduced because it was easy to review all the data from the other doctors who share the same patient. In addition, the confidence of the doctors who share a common treatment protocol would be higher. Therefore, a shared electronic medical record is expected to improve the quality of patient care.

• Journal of Digital Contents Society
• /
• v.12 no.1
• /
• pp.23-32
• /
• 2011

For the past few years, unlike wireless widespread United States and Japan, expensive cost and platform of the mobile web carrier underground and self-centered made achievement of domestic mobile web market sluggish. Nowadays, more and more people pay attention to the mobile web service because of the increased quality of wireless internet, development of mobile device and variety of the flat-rate payment system. However, another big problem is that mobile web is too hard to use. Also, the poor content of mobile web service is an extremely serious problem. In this paper, we put forward a new method for easy to access mobile web service which is use WINC expansion numbers and users can use these numbers to shit their own website. Along with the benefits of purchase WINC number general users are able to make website and control their website at less time and energy.