• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.126-134
• /
• 2011

Recently, many researchers are interested in using join queries to correlate sensor readings stored in different regions. In the conventional algorithm, the preliminary join coordinator collects the synopsis from sensor nodes and determines a set of sensor readings that are required for processing the join query. Then, the base station collects only a part of sensor readings instead of whole readings and performs the final join process. However, it has a problem that incurs communication overhead for processing the preliminary join. In this paper, we propose a novel energy-efficient in-network join scheme that solves such a problem. The proposed scheme determines a preliminary join coordinator located to minimize the communication cost for the preliminary join. The coordinator prunes data that do not contribute to the join result and performs the compression of sensor readings in the early stage of the join processing. Therefore, the base station just collects a part of compressed sensor readings with the decompression table and determines the join result from them. In the result, the proposed scheme reduces communication costs for the preliminary join processing and prolongs the network lifetime.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.3
• /
• pp.143-152
• /
• 2013

No-till farming system has been extensively studied all over the world as the effective method for maintaining the soil fertility. The general advantages of this system have been well known for reducing the labor, fuel, machinery, and irrigation cost as well as for increasing the soil quality through soil aggregation, water infiltration, microbial population and etc. Recently, it becomes more popular with the increase of interest on sustainable agriculture, especially because of its higher carbon sequestration potential compared to conventional tillage. Crop residue management should be essentially included to look forward to achieving the positive effect on reduction of greenhouse gas. Nonetheless, there are also negative opinions on effect of no-till farming system. For example, some researchers reported that soil physical properties were not improved by no-till under certain soil and climatic conditions. This means no-till farming systems were strongly affected by the soil characters and climatic conditions. Therefore, the researches to meet the specific-regional characters are greatly needed in order for no-till farming system to successfully settle in Korea. The objective of the review article is to present the future direction and perspective on no-till farming system in Korea. For this purpose, we summarized the results of domestic and foreign researches about no-till farming system until now. Specifically, the chapter on foreign research consisted of four parts: positive and negative effects, the effect in paddy soil, and latest research direction (2012-2013) of no-till farming systems. Whereas, review for domestic researches was divided into two main parts: paddy and upland soils. In the final chapter, the priorities for the optimum conservation tillage in Korea were discussed and proposed through the previous researches.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.439-444
• /
• 2022

Laser-induced plasmonic sintering of metal nanoparticles (NPs) is a promising technology to fabricate flexible conducting electrodes, since it provides instantaneous, simple, and scalable manufacturing strategies without requiring costly facilities and complex processes. However, the metal NPs are quite expensive because complicated synthesis procedures are needed to achieve long-term reliability with regard to chemical deterioration and NP aggregation. Herein, we report laser-induced Ag NP self-generation and sequential sintering process based on low-cost Ag organometallic material for demonstrating high-quality microelectrodes. Upon the irradiation of laser with 532 nm wavelength, pre-baked Ag organometallic film coated on a transparent polyimide substrate was transformed into a high-performance Ag conductor (resistivity of 2.2 × 10^-4 Ω·cm). To verify the practical usefulness of the technology, we successfully demonstrated a wearable transparent heater by using Ag-mesh transparent electrodes, which exhibited a high transmittance of 80% and low sheet resistance of 7 Ω/square.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.2
• /
• pp.223-229
• /
• 2024

Laser-induced plasmonic sintering of metal nanoparticles (NPs) holds significant promise as a technology for producing flexible conducting electrodes. This method offers immediate, straightforward, and scalable manufacturing approaches, eliminating the need for expensive facilities and intricate processes. Nevertheless, the metal NPs come at a high cost due to the intricate synthesis procedures required to ensure long-term reliability in terms of chemical stability and the prevention of NP aggregation. Herein, we induced the self-generation of metal nanoparticles from Ag organometallic ink, and fabricated highly conductive electrodes on flexible substrates through laser-assisted plasmonic annealing. To demonstrate the practicality of the fabricated flexible electrode, it was configured in a mesh pattern, realizing multi-touchable flexible touch screen panel.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.65-73
• /
• 2017

In this paper, we propose a stereo matching method to improve the image quality at the hole and the disparity discontinuity regions. The stereo matching method extracts disparity map finding corresponding points between stereo image pair. However conventional stereo matching methods have a problem about the tradeoff between accuracy and precision with respect to the length of the baseline of the stereo image pair. In addition, there are hole and disparity discontinuity regions which are caused by textureless regions and occlusion regions of the stereo image pair. The proposed method extracts initial disparity map improved at disparity discontinuity and miss-matched regions using modified AD-Census-Gradient method and adaptive weighted cost aggregation. And then we conduct the disparity map refinement to improve at miss-matched regions, while also improving the accuracy of the image. Experimental results demonstrate that the proposed method produces high-quality disparity maps by successfully improving miss-matching regions and accuracy while maintaining matching performance compared to existing methods which produce disparity maps with high matching performance. And the matching performance is increased about 3.22(%) compared to latest stereo matching methods in case of test images which have high error ratio.

• Journal of KIISE:Databases
• /
• v.33 no.2
• /
• pp.175-187
• /
• 2006

The data cube is an aggregation operator that computes group-bys for all possible combination of dimension attributes. %on the number of the dimension attributes is n, a data cube computes $2^n$ group-bys. Each group-by in a data cube is called a cuboid. Data cubes are often precomputed and stored as materialized views in data warehouses. These data cubes need to be updated when source relation change. The incremental maintenance of a data cube is to compute and propagate only its changes. To compute the change of a data cube of $2^n$ cuboids, previous works compute a delta cube that has the same number of cuboids as the original data cube. Thus, as the number of dimension attributes increases, the cost of computing a delta cube increases significantly. Each cuboid in a delta cube is called a delta cuboid. In this paper. we propose an incremental cube maintenance method that can maintain a data cube by using only $_nC_{{\lceil}n/2{\rceil}}$ delta cuboids. As a result, the cost of computing a delta cube is substantially reduced. Through various experiments, we show the performance advantages of our method over previous methods.

• Korean Journal of Materials Research
• /
• v.33 no.12
• /
• pp.525-529
• /
• 2023

β-Ga₂O₃ has become the focus of considerable attention as an ultra-wide bandgap semiconductor following the successful development of bulk single crystals using the melt growth method. Accordingly, homoepitaxy studies, where the interface between the substrate and the epilayer is not problematic, have become mainstream and many results have been published. However, because the cost of homo-substrates is high, research is still mainly at the laboratory level and has not yet been scaled up to commercialization. To overcome this problem, many researchers are trying to grow high quality Ga₂O₃ epilayers on hetero-substrates. We used diluted SiH4 gas to control the doping concentration during the heteroepitaxial growth of β-Ga₂O₃ on c-plane sapphire using metal organic chemical vapor deposition (MOCVD). Despite the high level of defect density inside the grown β-Ga₂O₃ epilayer due to the aggregation of random rotated domains, the carrier concentration could be controlled from 1 × 10¹⁹ to 1 × 10¹⁶ cm^-3 by diluting the SiH4 gas concentration. This study indicates that β-Ga₂O₃ hetero-epitaxy has similar potential to homo-epitaxy and is expected to accelerate the commercialization of β-Ga₂O₃ applications with the advantage of low substrate cost.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.225-234
• /
• 2015

Nowadays a Virtual Power Plant (VPP) represents an aggregation of distributed energy resource such as Distributed Generation (DG), Combined Heat and Power generation (CHP), Energy Storage Systems (ESS) and load in order to operate as a single power plant by using Information and Communication Technologies, ICT. The VPP has been developed and verified based on a single virtual plant platform which is connected with a number of various distributed energy resources. As the VPP's distributed energy resources increase, so does the number of data from distributed energy. Moreover, it is obviously inefficient in the aspects of technique and cost that a virtual plant platform operates in a centralized manner over widespread region. In this paper the concept of the large-scale VPP which can reduce a error probability of system's load and increase the robustness of data exchange among distributed energy resources will be proposed. In addition, it can directly control and supervise energy resource by making small size's virtual platform which can make a optimal resource scheduling to consider of variable and sensitive load in the large-scale VPP. It makes certain the result is verified by simulation.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.488-494
• /
• 2009

Zeolite 4A was prepared by new synthesis method, 2-step crystallization, for enhancement of oil absorption capacity. Vietnamese sand and $NaAlO_2$ solution from natural bauxite were used as raw materials in stead of conventional cullet and $Al(OH)_3$ to reduced the processing cost. Some dissolved organics in $NaAlO_2$ solution were removed by activated carbon. Synthetic method was progressed by 1) reacting the raw materials at $55^{\circ}C$, 4 hr with the ratio of Si/Al to 1.15, and 2) reacting at $65^{\circ}C$, 5 hr with reducing the ratio of Si/Al to 0.98. New method can easily control the particle size, aggregation, surface polarity, and enhanced the whiteness of the products. The prepared zeolite 4A shows excellent oil absorption capacity(O.A.C>50 ml/100 g) as well as equal value with calcium ion exchange capacity, and proves the 2-step crystallization is the economic and effective process for the preparation of zeolite 4A.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.775-788
• /
• 2006

Many disaster monitoring systems are constantly studied to prevent disasters such as environmental pollution, the breaking of a tunnel and a building, flooding, storm earthquake according to the progress of wireless telecommunication, the miniaturization of terminal devices, and the spread of sensor network. A disaster monitoring system can extract information of a remote place, process sensor data with rules to recognize disaster situation, and provide work for preventing disaster. However existing monitoring systems are not enough to predict and prevent disaster, because they can only process current sensor data through utilizing simple aggregation function and operators. In this paper, we design and implement a disaster prevention system to predict near future dangerous area through using outside sensor network and spatial Information. The provided prediction technique considers the change of spatial information over time with current sensor data, and indicates the place that could be dangerous in near future. The system can recognize which place would be dangerous and prepare the disaster prevention. Therefore, damage of disaster and cost of recovery would be reduced. The provided disaster prevention system and prediction technique could be applied to various disaster prevention systems and be utilized for preventing disaster and reducing damages.