• 제목/요약/키워드: cos

검색결과 494건 처리시간 0.026초

3T MR 스핀에코 T1강조영상에서 적정의 숙임각 (3T MR Spin Echo T1 Weighted Image at Optimization of Flip Angle)

  • 배성진;임청환
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제32권2호
    • /
    • pp.177-182
    • /
    • 2009
  • 목 적 : 영상진단영역에서 이용되고 있는 3T(T, tesla) MR의 스핀에코(SE, spin echo) T1강조영상(T1-Weighted image)기법에서 숙임각(FA, flip angle)의 변화에 따른 영상의 질을 나타내는 신호대 잡음비(SNR, signal to noise ratio), 대조도 잡음비(CNR, contrast to noise ratio)를 평가한 후 특이흡수율(SAR, specific absorption rate)을 줄이면서 CNR를 향상시킬 수 있는 적정의 숙임각을 알아보고자 하였다. 대상 및 방법 : 고식적 스핀에코에서 통상적으로 사용하는 90$^\circ$ RF pulse 대신 50$^\circ$ RF pulse에서 130$^\circ$까지 10$^\circ$씩 증가시키면서 대뇌 T1강조영상을 획득하였다. 이 영상들에서 백질(WM, white matter), 회백질(GM, gray matter)과 배경(background)에서 각각 신호강도를 측정하여 SNR를 구하였고, 기존의 T1 이완곡선 R1 = 1- exp ($\frac{-TR}{T1}$)으로, 즉 Ernst angle cos $\theta$ = exp ($\frac{-TR}{T1}$)과의 관계성으로 T1강조영상에서 WM과 GM의 SNR과 CNR의 정규성 검정과 비모수 검정인 Kruskal-wallis 분석으로 적정의 숙임각을 알아보고자 하였다. 결 과 : WM와 GM의 신호강도와 배경잡음 신호강도를 이용하여 SNR를 구한 결과 WM의 SNR는 숙임각 50$^\circ$보다 130$^\circ$에서 1.6배 정도 증가하였고, GM의 SNR는 약 1.9배 정도 높게 나타났다. 두 조직의 SNR은 T1 이완곡선과 동일한 양상을 보여주고 있다. R1 = 1- exp ($\frac{-TR}{T1}$)으로 분석한 SNR의 신호증가가 둔화되는 기점이 WM은 120$^\circ$의 숙임각에서, GM은 110$^\circ$ 이후로 나타나 두 조직에서 다르게 나타나는 것을 알 수 있었다. WM과 GM의 SNR는 130$^\circ$의 숙임각에서 높았지만 CNR에 있어서는 80$^\circ$에서 최고 높게 나타났으며, 80$^\circ$ 전후의 숙임각에서는 감소하였다. 결론 : 3.0T MR의 SE T1강조영상 기법에서 숙임각의 증가에 따라 SNR는 증가하였지만 CNR는 이전까지의 임상에서 사용하는 숙임각이 90$^\circ$ 보다 적은 80$^\circ$에서 CNR이 최고로 나타나 통상적으로 사용하는 숙임각보다 10$^\circ$ 낮은 RF pulse duration time 사용함으로써 3T에서 문제로 제기된 SAR도 줄일 수 있었다. 앞으로 3.0T MR의 SE T1강조영상 기법에서 적정 숙임각을 사용함으로서 CNR을 높일 수 있을 것으로 기대되어진다.

  • PDF

로우터리 맥류파종기 경운날의 개량시험 (Improvement of Rotary Tine for Barley Seeder Attached to Rotary Tiller)

  • 김성래;김문규;김기대;허윤근
    • Journal of Biosystems Engineering
    • /
    • 제4권1호
    • /
    • pp.1-23
    • /
    • 1979
  • The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

  • PDF

수확시 숙기가 호밀 라운드베일 사일리지의 품질변화에 미치는 영향 (Effect of Maturity at Harvest on the Changes in Quality of Round Baled Rye Silage)

  • 김종근;정의수;서성;강우성;함준상;김동암
    • 한국초지조사료학회지
    • /
    • 제21권1호
    • /
    • pp.1-6
    • /
    • 2001
  • 본 시험은 1998 년 축산기술연구소 초지사료과 시험포장에서 호밀 라운드베일 사일리지 제조시 수확시 숙기별로 발효가 진행됨에 따라 사일리지의 품질에 미치는 영향을 비교하기 위하여 수행되었다. 시험 설계는 분할구 배치법으로 주구는 수잉기, 출수기 및 개화기에 수확하는 수확시 숙기를 두고 세구로는 발효 경과 일수 (1, 2, 3. 5, 10, 30, 45 및 60 일)를 두고 3 반복으로 수행하였으며 라운드베일 사일리지 제조시 호밀은 수잉기에는 1일, 출수기 및 개화기에는 0.5일간 예건하였다. 최종 pH는 개화기 > 수잉기 > 출수기의 순으로 나타났으며 개화기는 pH의 감소가 발효초기에 일어났으나 수잉기와 출수기는 1~2일 늦어짐을 알 수 있었다. 암모니아태 질소 함량은 수잉기에서 놀은 비율로 나타났고 발효가 진행됨에 따라 증가되었다. 그러나 출수기에서는 발효 30일째까지 감소한 후 45일이후에 다시 증가하였다. 발효단계별 온도에 있어서 내부온도는 기상의 영향을 받지 않고 초기 3$0^{\circ}C$ 부근까지 상승한 후 계속 감소하였으나 외부온도는 10일 후부터 기상에 따라 변화하는 경향을 보여주었다. 초산 함량은 5일째까지는 수확시 숙기에 따른 차이가 없었으나 10일 후부터는 수잉기에서 높아졌으며 낙산 함량도 수잉기는 5일째, 출수기는 10일 후부터 발생되었으며 젖산 함량은 초기 l~2% 내외에서 6~8% 내외까지 지속적으로 증가되었다. 젖산균수는 출수기와 개화기는 5일째 그리고 수잉기는 10일째에 가장 높은 수치를 나타내었다. 이상의 결과를 종합하여 볼 때 호밀 라운드베일 사일리지의 발효는 초기 5일 이내에 대부분이 일어나며 따라서 초기 발효조건을 맞추는 것이 고품질 사일리지를 제조할 수 있는 가장 효과적인 방법이라 할 수 있다. 종이라 판단된다.세포 모두에서 endogenous RXR의 발현이 일어남을 확인하였고 RXR expression plasmid를 transfection시켰을 때 두 세포 모두에서 단백질의 발현이 현저하게 증가되었다. Constitutive Androstane Receptor (CAR)에 의한 CYP2B의 PBRU 활성효과를 다르게 분화된 세포에서 차이가 일어나는지를 비교하기 위하여 CAR에 의해 매개되는 PBRU의 transactivation효과를 Hep G2와 COS세포에서 조사하였다. Hep G2 세포에서는 transfection된 CAR의 발현에 의해 firefly luciferase 보고단백질의 활성이 약 12배 증가하였다. CAR 발현유전자를 15 ng transfection하였을 때 주어진 보고유전자의 양에 대하여 최대반응을 나타내었고 CYP2B1PBRU가 제거된 CYP2C1 promotor/firefly luciferase를 보고유전자로 사용하였을 때는 CAR에 의한 luciferase의 활성이 나타나지 않았다. Hep G2와는 달리, COS세포에서는 transfection된 CAR의 발현이 PBRU에 의한 firefly luciferase보고단백질의 발현에 영향을 주지 못하였다. 이러한 결과들은 분화된 세포의 종류에 따라서 constitutive androstane receptor의 CYP2BPBRU 활성효과가 다르게 나타날 수 있음을 제시할 뿐만 아니라, 간세포에서 Phenobarbital에 의한 PBRU의 활성유도에 영향을 주는 endogenous 매개 인자들 중 CAR와 RXR과는 다른 전사조절인자들이 필요로 하며 이러한 인자들의 발현이 콩팥 세포에서는 다르게 존재함을 시사한다.", including parameters affecting the

  • PDF

미세균열의 간격 분포를 이용한 결의 평가(V) (Evaluation for Rock Cleavage Using Distribution of Microcrack Spacings (V))

  • 박덕원
    • 암석학회지
    • /
    • 제26권3호
    • /
    • pp.297-309
    • /
    • 2017
  • 거창지역의 쥬라기 화강암에 대하여 결의 특성에 대한 분석을 실시하였다. 박편의 확대사진 및 간격-누적빈도 도표에서 도출한 16개 파라미터의 결합을 통하여 결에 대한 종합적인 평가를 실시하였다. 결에 대한 이들 간격의 파라미터의 대표값에 대한 분석 결과를 요약하면 다음과 같다. 첫째, 상기 파라미터는 그룹 I(간격의 빈도수(N), 총 간격($1mm{\geq}$), 상수(a), 지수(${\lambda}$), 지수 직선의 기울기(${\theta}$), 선의 길이(oa') 및 삼각비($sin{\theta}$, $tan{\theta}$) 그리고 그룹 II(평균 간격(Sm), 평균 간격과 중앙 간격 사이의 차이값(Sm-Sme), 밀도(${\rho}$), 선의 길이(oa 및 aa'), 직각삼각형(${\Delta}oaa^{\prime}$)의 면적 및 삼각비($cos{\theta}$)로 분류할 수 있다. 그룹 I에 속하는 8개 파라미터의 값은 H(3번 결, H1+H2)

냉음극 형광램프의 표준화 계측을 위한 실험과 분석 (An Experiment and Analysis for Standardize Measurement on CCFL)

  • 김동준;정종문;정희석;김진선;이민규;김정현;구제환;권기청;강준길;최은하;조광섭
    • 한국진공학회지
    • /
    • 제17권4호
    • /
    • pp.331-340
    • /
    • 2008
  • 교류 $50{\sim}100\;kHz$의 고주파와 수 kV의 고전압으로 구동되는 냉음극 형광램프의 전류 및 전압을 계측하는 방법을 조사하였다. 고 전압 측에 설치되는 프로브 자체의 임피던스 영향으로 램프의 휘도가 변화하고 누설 전류가 발생하여 정확한 전류 및 전압의 계측이 어렵다. 따라서 프로브의 임피던스와 누설 전류를 고려한 회로 분석을 통하여 올바른 계측 방법을 제시하였다. 프로브 설치로 휘도 변화 시, 인버터에 입력되는 DC 전압을 조정하여 램프의 특정 휘도를 유지하여 계측한다. 램프 전류($I_G$)는 접지 측에서 전류 프로브나 고주파 전류계로 계측하며, 전압은 고 전압 측에 설치한 전압 프로브로 계측한다. 램프 전압($V_C$)은 고전압이 인가되는 냉음극과 안전 캐패시터 사이에서 계측하며, 인버터의 출력 전압(VI)은 안전 캐패시터와 인버터 출력단 사이에서 계측한다. 램프 전압($V_C$)과 램프 전류($I_G$)의 위상차가 없기 때문에, 램프 자체의 순수 소모 전력은 램프 전압($V_C$)와 램프 전류($I_G$)의 곱이다. 인버터의 출력 전압($V_I$)과 램프 전류($I_G$)의 위상차($\theta$)는 전압 프로브의 용량성 임피던스로 인하여 계측값이 부정확하며, 회로의 분석에서 얻어진 $cos{\theta}=V_C/V_I$로부터 위상차를 얻을 수 있다.

초위성체 마커를 활용한 가축다양성정보시스템(DAD-IS) 등재 재래닭 집단의 유전적 다양성 분석 (Genetic Diversity of Korean Native Chicken Populations in DAD-IS Database Using 25 Microsatellite Markers)

  • 노희종;김관우;이진욱;전다연;김승창;고응규;문성실;이현정;이준헌;오동엽;변재현;조창연
    • 한국가금학회지
    • /
    • 제46권2호
    • /
    • pp.65-75
    • /
    • 2019
  • 본 연구는 세계식량농업기구(FAO) 가축다양성정보시스템(DAD-IS)에 등재되어 있는 우리나라 재래닭 집단의 유전적 다양성 및 외래품종과의 차별성을 분석하기 위해 25개의 초위성체(MS) 마커를 이용하여 총 18개 집단 548수의 유전자형을 분석하였고, 이를 토대로 기대($H_{\exp}$) 및 관측이형접합도($H_{obs}$), 다형정보지수(PIC), 유전거리, 유전적 균일도 등을 계산하였다. 마커별 다형성 분석 결과, 총 195개의 대립유전자가 나타났으며, $H_{\exp}$와 PIC의 경우 MCW0145에서 각각 0.646, 0.569로 가장 높았으며, $H_{obs}$의 경우 ADL0278에서 0.773으로 가장 높은 수치를 보이고 있었던 반면, MCW0078에서는 $H_{\exp}$, $H_{obs}$, PIC가 각각 0.263, 0.291, 0.217로 가장 낮은 것을 확인할 수 있었다. 집단간 다양성 분석 결과로는 MNA, $H_{\exp}$, $H_{obs}$, PIC 모두 황갈색재래종(KNY) 집단(각각 4.60, 0.627, 0.643, 0.563)에서 가장 높게, 횡성약닭(HYD) 집단(각각 1.84, 0.297, 0.286, 0.236)에서 가장 낮게 나타났다. 대립유전자형의 빈도를 바탕으로 계산된 18개 품종간의 DA 유전거리 분석 결과, 횡성약닭(HYD)와 화이트레그혼F(LGF) 집단 사이에서 0.675로 가장 먼 유전거리를 형성하고 있었으며, 같은 품종인 로드아일랜드레드 두 집단(RRC, RRD) 사이에서 0.027로 가장 가까운 유전거리를 보였다. 한편, 같은 품종임에도 불구하고, 코니시 두 집단(COS, COH)사이에서는 0.313의 비교적 먼 유전거리를 나타내고 있었다. 집단의 실제 구조를 확인하기 위한 집단별 균일도 분석 결과, K=15에서 최적의 K값(${\Delta}K:66.22$)을 얻을 수 있었으며, 18개의 집단 중 14개의 집단에서 90% 이상의 높은 유전적 균일도를 나타내며 독립적인 군락을 형성하고 있었다. 또한, 황갈색재래종(KNY), 현인흑계(HIC), 연산오계(KNO) 집단에서도 각각 88.9%, 83.9%, 76.3%로 독립적인 군락을 형성하고 있는 것을 확인할 수 있었다. 반면, 제주재래닭(JJC)의 경우 독립적인 군락을 형성하지 못하고, 황갈색재래종(KNY) 집단이 속해 있는 2번 군락에서 가장 높은 44.3%의 균일도를 보이고 있었으며, 3번 군락(17.7%)과 8번 군락(19.1%)에도 일부 포함되어 있는 것으로 보아 집단 조성 과정에 있어 타집단과의 교잡이 일어났을 것으로 추정되며, 독립적인 집단으로 구분하는 것이 어렵기 때문에 추후 개체식별을 통한 지속적인 계획교배를 실시하여 유전적 고정화 작업이 이루어질 필요성이 있을 것으로 판단된다. 이상의 결과로 DAD-IS에 등재되어 있는 우리나라 재래닭 집단이 외래 토착종 집단과 확연하게 구분이 되며, 각 재래닭 집단간에도 비교적 뚜렷하게 구분되는 것을 확인함으로써, 고유 종자로서의 과학적인 근거를 확보할 수 있었으며, 추후 재래닭 유전자원에 대한 국가 수준의 관리 및 평가를 통해 다양한 육종 소재로 이용할 수 있는 기초자료로써 활용될 수 있을 것으로 보인다.

토양개량제(土壤改良劑) Uresol 및 Bitumen처리(處理)가 토양(土壤)의 수분이동(水分移動)과 유실(流失)에 미치는 영향(影響) II. 습윤각(濕潤角)과 수분(水分)의 광산계수변화(鑛散係數變化) (Effects of Soil Conditioner "Uresol and Bitumen" Treatments on Water Movement and Soil Loss II. The Changes of Wetting Angle and Water Diffusivity)

  • 조인상;조성진
    • 한국토양비료학회지
    • /
    • 제17권1호
    • /
    • pp.12-17
    • /
    • 1984
  • 토양개량제(土壤改良劑) 처리(處理)가 토양중(土壤中)에서 수분(水分)의 이동(移動)에 미치는 영향(影響)을 구명(究明)코져 사양토(砂壤士)와 미사질양토(微砂質壤土)에 친수성(親水性)인 Uresol과 소수성(疎水性)인 Bitumen을 처리(處理)하여 습윤각(濕潤角), 침투성(浸透性) 및 확산계수(擴散係數) 변화(變化)를 측정(測定)하였는 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. Uresol 처리(處理)에 의하여 사양토(砂壤土) 습윤각(濕潤角)이 $10^{\circ}$이상(以上) 감소(減少)되어 친수성(親水性)이 증대(增大)되었으나 미세질양토(微砂質壤土)는 큰 변화(變化)가 없었다. 2. Bitumen 처리(處理)로 미세질양토(微砂質壤土)의 습윤각(濕潤角)은 무처리(無處理) $76.0^{\circ}$에서 $84.9^{\circ}$로 증가(增加)되었으며 사양토(砂壤土)는 소수성(疎水性)으로 변하였다. 3. 침투성(浸水性)(Penetrability)과 흡수성(吸水性)(Sorpotivity)은 Uresol 처리(處理)에 의하여 사양토(砂壤土)에서는 2배이상(倍以上) 증가(增加)되었고 미세질양토(微砂質壤土)에서는 큰 차이가 없었으나, Bitumen 처리(處理)는 두 토양의 침투성(浸水性)을 반이하(半以下)로 억제(抑制)시켰다. 4. 수분(水分)의 침투성(浸水性)은 습윤각(濕潤角)의 여현(餘弦)(cos ${\alpha}$)과 정비례(正比例)하였다. 5. 수분(水分)의 확산계수(擴散係數)는 토양개량제(土壤改良劑) 처리(處理)로 크게 변화(變化)되었으며, 그 차이(差異)는 토양수분함량(土壤水分含量)이 적을수록 심(甚)하였다.

  • PDF

복색 상징적 의미에 관한연구 (A Study on the Symbolic Meaning of the Costume Colours)

  • 이순홍
    • 복식
    • /
    • 제30권
    • /
    • pp.85-99
    • /
    • 1996
  • This study has been made to examine the symbolic meaning of our traditional costume colours based on the theory of yin-yang Wu-hsing the interaction of yin and yang with the rotation of the five agents wood firt earth metal and waters. Presenting the spirt and the life of our race the costume culture has been keep-ing its own systematic symbol. Being sensible the colour has to be under-stood as the colour sense therefore the cos-tume colour has begun to have the symbolic meaning with the feeling or the mental value. According to the theory of yin-yang wu-hsing the costume colour has presented our racial sprit way of thinking and way of life for a long time and it has become the tra-ditional culture at last. Based on the doctrine of cosmic harmony through the motion of yin and yang or the passive and active elements are their five agents form the material force of everything. The order of nature has its counterpart in five symbolic costume colours wood-blue ; fire-red: earth-yellow; metal-white: water-black. The five colours are called the primary colours. which produce the next compound colours. Accepted in the social system as well as the social stats the costume colour has set up systematically. The theory of Yin-yang Wu-hsing has given the five colours the symbolic meanings and its mainstream has been the function of Sangsaeng and Sangeuk which are genera-ted by the power of virture. The former is mu-tually beneficial while the latter destructive. The colour as a costume colour has been made distinction between the colour of the up-per classes and the colour of the middle and lower classes and the specific colour has presented the symbolic meanings. The yeollow the red and the purple have been regarded as the colour of king queen and upper classes Being the colour recognition the costume colour has been established by the society and the race generally Implied the spiritual elements the colour recognition could select the lucky colour in accordance with one's des-tiny. Besides the colour recognition has begun to appear as the racial costumes to protect the society and to pray for good fortune. According to the theory of Yin-yang Wu-hsing the costume colour has been forming through our long history and has become our costume culture. Therefore the colour of the costume has signified not only the colour sense but also the important symbolic meanings.

  • PDF

Identification of a Novel Human Zinc Finger Gene, ZNF438, with Transcription Inhibition Activity

  • Zhong, Zhaomin;Wan, Bo;Qiu, Yun;Ni, Jun;Tang, Wenwen;Chen, Xinya;Yang, Yun;Shen, Suqin;Wang, Ying;Bai, Meirong;Lang, Qingyu;Yu, Long
    • BMB Reports
    • /
    • 제40권4호
    • /
    • pp.517-524
    • /
    • 2007
  • There were many different families of zinc finger proteins that contained multiple cysteine and/or histidine residues and used zinc to stabilize their folds. The classical C2H2 zinc finger proteins were the founding members of this superfamily and were among the most abundant proteins in eukaryotic genomes. C2H2 proteins typically contained several C2H2 fingers that made tandem contacts along the DNA. Here we reported a novel C2H2 type zinc finger gene, ZNF438, which encoded 828 amino acids that formed five zinc finger domains. Bioinformatics analysis revealed that the ZNF438 was mapped to human chromosome 10p11.2 and shared 62% identity with rat and mouse homologues. RT-PCR analysis indicated that it was ubiquitously expressed in 18 human adult tissues. With immunofluorescence assay, it was shown that the exogenous Flag-tagged ZNF438 was located in nucleus of COS-7 cells. To further explore the function of ZNF438, we examined the transcriptional activity of ZNF438 protein by transfecting recombinant pM-ZNF438 into mammalian cells. The subsequent analysis based on the duel luciferase assay system showed that ZNF438 was a transcriptional repressor.

비이온계 계면활성제 수용액이 PET직물의 습윤특성에 미치는 영향 (제2보) -계면활성제와 직물의 특성- (Effect of Nonionic Surfactant Solutions on Wetting and Absorbency of Polyethylene Terephthalate(PET) Fabrics (Part II) -Surfactants Characteristics and Fabric Properties-)

  • 김천희
    • 한국의류학회지
    • /
    • 제29권12호
    • /
    • pp.1546-1553
    • /
    • 2005
  • 비 이온계 계면활성제인 Span 20, Tween 20,40, 60, 80, 21, 61, 81, 65, 85 수용액이 PET직물의 습윤특성에 미치는 영향을 연구하였다. 5종류의 PET직물이 사용되었는데, PET 1, 2, 3은 밀도, 두께 등이 서로 다르고 가공은 되어 있지 않고, PET 4와 PET 5는 물리적 특성이 PET 2와 비슷한데 PET 4는 heat set가 공이 되어 있고 PET 5는 rewetting agent가 첨가되어 있다. PET직물의 습윤특성은 비이온계 계면활성제가 첨가되면 크게 향상되며, 수분 보유량은 $cos{\theta}$와 adhesion tension과 정의 상관관계를 보여준다. 친유기가 짧은 친수성 계면활성제나 불포화탄화수소 친유기 구조를 가진 계면활성제가 PET직물의 습윤특성 향상에 효과적이다. 계면활성제가 없을 경우 수분 보유량비(W/H)는 실 간 간격이 넓은 PET직물이 작은 직물보다 컸으나, 비이올계 계면활성제를 첨가할 경우 W/H는 실 간 간격에 관계없이 유사해졌다. 물리적 특성이 비슷해도 heat set가공이 되어 있는 직물은 가공이 되어 있지 않은 직물보다 W/H 값이 작았고, rewetting agent가 첨가된 직물은 W/H 값이 컸다.