• 한국식품저장유통학회지
• /
• 제7권1호
• /
• pp.63-67
• /
• 2000

Changes in the compressive strength of four typical corrugating mediums (K$_2$A, AS and S) as affected by relative humidity conditions were compared and their relative cost effectiveness was analysed. All mediums lost their compressive strength as relative humidity increased. at the relative humidity of 93% , As medium lost 58% of its initial strength while S medium did about 40%. Calculations of compress factor and compress factor by price indicated that $K_2$ medium was the most cost effective and maintained the highest compressive strength among the mediums tested. It was recommended that $K_2$ medium could be effectively used to make corrugated fiberboard especially for fresh agricultural product packaging .

• 한국식품저장유통학회지
• /
• 제4권3호
• /
• pp.245-249
• /
• 1997

In order to find effective linerboard compositions for the corrugated fibreboard containers for apples, we have evaluated the strength and the cost effectiveness of the various linerboards and corrugated fibreboard containers. From the results, we suggest SC240, WLK210 or SK180 for the outer liners, M180 to M250 for the mediums, and K2200 or Al80 for the inner liners, respectively. Furthermore, we recommend two cost effective types of corrugated fibreboard compositions, SC240/S120/S120/M160/A180 for the white face liners, and SK180/M180/S120/M180/A180 for the color face liners. Evidence has been presented to support the conclusion that the new high compression strength corrugated fibreboard containers have better performance in the compression and bursting strength tests, while reducing material costs by thirty four percents.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.47-53
• /
• 2010

It is important to utilize the citrus sludge in terms of the reuse of waste materials in the manufacture of corrugated medium. Especially, the mandarin industry occupies the first place in Jeju province. In this paper, the application of citrus sludge mixed with KOCC recycled fibers into the manufacture of corrugated medium was studied. The citrus sludge was acidic in pH value. Also, the constituents of citrus sludge contain some short fibers, fines, and mucus which contain flavonoids, pectins and so on. In papermaking application, these components cause some troubles like foams, bad smell, fouling on the paper machine, and bad drainage and web breaks of wet web. The strength properties of handsheets prepared from KOCC and citrus sludge was decreased, compare to handsheets made of only KOCC. To compensate the problems on strength properties, some kinds of additives were tried to apply into papermaking wet-end system in laboratory scale. As a result, mixing conditions of alum, starch and anionic additives showed the best options in the recovery of strength properties and formations of corrugated medium.

• 펄프종이기술
• /
• 제36권4호
• /
• pp.1-8
• /
• 2004

Linerboards and corrugating mediums are being produced using recycled old corrugated containers (OCC) as major raw materials. The utilization rate of recycled fibers is ex­pected to increase further in the future to reduce raw material cost. Use of recycled fibers as raw materials for linerboard, however, causes many problems for papermakers. As the utilization rate of recycled fiber and number of recycling of fibers increases, quality and process problems including strength reduction and deterioration of machine runn­ability will increase. To overcome the problem of strength reduction associated with the use of recycled fibrous materials for producing quality linerboards, diverse extensive research efforts and new technological approaches have been taken. In this study, disintegration characteristics of aee was evaluated by determining the unslushed contents. The amount of unslushed content of KOCC was lower than AOCC. But contaminants content of KOCC was higher than AOCC. As the consistency in disintegration increased, the amount of unslushed fiber content decreased.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.99-103
• /
• 2006

Use of recycled fibers in papermaking has been increased for economical and environmental reasons. Recycled panels are major liber resources for brown grades and newsprints. Since the recycled fibers have disadvantageous properties as raw materials for papermaking it is of great importance to optimize the use of these recycled fibers. OCC (Old Corrugated Containers) is the major fiber source for linerboards and corrugating mediums that require diverse specification in strength properties. Many studies have been focused to overcome the problems of strength reduction of brown grades when recycled fibers are used as raw materials. The problem of strength loss for papers made from recycled fibers is closely associated with the increased amount of fines in recycled fibers and hornification of fibers. Fines contained in the recycled fiber resources cause problems not only in paper properties but also in process runnability. This shows that the optimal management and proper use of fines in recycling papermaking system are critical to get most benefits of using recycled fibers. In this study some approaches for optimal use of fiber fines in recycled paper mill have been investigated. Stock samples, prepared in the laboratory and obtained from a recycling plant were used. Fractionation of these samples was made using Sweco screen. And the effect of the addition of polyelectrolytes including cationic PAM and PEI on drainage and retention was evaluated. Different methods of polymer addition were compared to find the most effective ways of treating recycled fiber stocks with polyelectrolytes. Addition of polyelectrolytes to the short fiber fraction was most effective in retention and drainage. The influence of the charge and molecular weight of these two polymers has been examined and discussed.