• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.3
• /
• pp.163-172
• /
• 2003

A stereo matching has been an important tool for the reconstruction of 3D terrain. The current state of stereo matching technology has reached the level where a very elaborate DEM(Digital Elevation Map) can be obtained. However, there still exist many factors causing DEM error in stereo matching. This paper propose a new method to reduce the error caused by the lack of significant features in the correlation window The proposed algorithm keeps the correlation window as small as possible, as long as there is a significant feature in the window. Experimental results indicate that the proposed method increases the DEM accuracy by $72.65\%$ in the plain area and $41.96\%$ in the mountain area over the conventional scheme. Comparisons with Kanade's result show that the proposed method eliminates spike type of errors more efficiently than Kanade's adaptive window technique and produces reliable DEM.

• Journal of Mechanical Science and Technology
• /
• v.17 no.3
• /
• pp.409-421
• /
• 2003

The hierarchical recursive local-correlation PIV algorithm with CBC (correlation based correction) method was employed to increase the spatial resolution of PIV results and to reduce error vectors. The performance of this new PIV algorithm was tested using synthetic images, PIV standard images of Visualization Society of Japan, real flows including ventilation flow inside a vehicle passenger compartment and wake behind a circular cylinder with riblet surface. As a result, most spurious vectors were suppressed by employing the CBC method, the hierarchical recursive correlation algorithm improved the sub-pixel accuracy of PIV results by decreasing the interrogation window size and Increased spatial resolution significantly. However, with recursively decreasing of interrogation window size, the SNR (signal-to-noise ratio) in the correlation plane was decreased and number of spurious vectors was increased. Therefore, compromised determination of optimal interrogation window size is required for given flow images, the performance of recursive algorithm is also discussed from a viewpoint of recovery ratio and error ratio in the paper.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2332-2338
• /
• 2011

In this study, we proposed a new promising idea of utilizing moving window principal component analysis (MWPCA) as a sensitive diagnostic tool to detect the presence of peak position shift. In this approach, the moving window is constructed from a small data segment along the wavenumber axis. For each window bound by a narrow wavenumber region, separate PCA analysis was applied. Simulated spectra with complex spectral feature variations were analyzed to explore the possibility of MWPCA technique. This MWPCA-based detection of the peak shift, potentially coupled with 2D correlation analysis to provide additional verification, may offer an attractive solution.

• Journal of Astronomy and Space Sciences
• /
• v.8 no.1
• /
• pp.115-123
• /
• 1991

Automatching algorithm is suitable for cross-correlation, which showed correlation surface about maximal correlation coefficient. The size of the window area must be determined empirically, whereas window size generally chosen as a compromise between speed and accuracy. It is possible that epipolar transform prevented from mismatching and decreased search space. In application of the astronomical fields, automatching algorithm mainly used to planet surface recovery in satellite image.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.6
• /
• pp.568-576
• /
• 2010

It is widely known that the leak locating of underground plastic pipelines is much more difficult than that of cast iron pipelines. The precision of the leak locating depends upon the speed of leak signal and the time delay estimation between the two sensors on the pipeline. In this paper, six different windowing filters are considered to improve the time delay estimation especially for the plastic pipelines. The time delay is usually estimated from the peak time of cross-correlation functions. The filtering windows including rectangle, Roth, Wiener, SCOT, PHAT and maximum likelihood are applied to derive the generalized cross-correlation function and compared each other. Experimental results for the actual plastic underground water supply pipeline show that the introduction of the filtering windows improved the precision of time delay estimation. Some window functions provide excellent leak locating capability for the plastic pipe of 98 m long, which is less than 1 % of the pipe lengths. Also a new probabilistic approach that the combinations of all results from each filtering window is suggested for the better leak locating.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.138-146
• /
• 2003

A critical issue in area-based stereo matching lies in selecting a fixed rectangular window size. Previous stereo methods doesn't deal effectively with occluding boundary due to inevitable window-based problems, and so give inaccurate and noisy matching results in areas with steep disparity variations. In this paper, a variable window approach is presented to estimate accurate, detailed and smooth disparities for three-dimensional structure reconstruction. It makes the smoothing of depth discontinuity reduced by evaluating corresponding correlation values and intensity gradient-based similarity in the three-dimensional disparity space. In addition, it investigates maximum connected match candidate points and then devise the novel arbitrarily shaped variable window representative of a same disparity to treat with disparity variations of various structure shapes. We demonstrate the performance of the proposed variable window method with synthetic images, and show how our results improve on those of closely related techniques for accuracy, robustness, matching density and computing speed.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.69-72
• /
• 2000

In CDMA systems, the performance of the typical multipath searcher degrades much according as the signal to noise ratio becomes low. In this paper, multipath searcher algorithm is proposed based on sliding window to overcome this drawback. In searcher systems, correlation values between incoming and local PN sequences are used to acquire multipath components. Therefore more accurate distributions of correlation values obtained through this proposed algorithm enables to get higher detection probability. In computer simulations, it is verified that proposed algorithm has better performances in Rayleigh fading channel and Gaussian channel.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.155-158
• /
• 2004

To investigate the in-situ REV, cross-correlations between the ablsolute value of iu/outflux in tested boreholes and fracture frequency with various window widths were calculated. The changes of vertical flow rates can be considered as iu/outflux into/out of borehole. The results of cross-correlation analysis shows that 7m can be the most appropriate width of the appliable window.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.201-205
• /
• 2007

In the post-Cold War era, acquisition technique of high-resolution satellite imagery (HRSI) has begun to commercialize. IKONOS-2 satellite imaging data is supplied for the first time in the 21st century. Many researchers testified mapping possibility of the HRSI data instead of aerial photography. It is easy to renew and automate a topographical map because HRSI not only can be more taken widely and periodically than aerial photography, but also can be directly supplied as digital image. In this study matching size of IKONOS Geo-level stereo image is presented lot production of digital elevation model (DEM). We applied area based matching method using correlation coefficient of pixel brightness value between the two images. After matching line (where "matching line" implies straight line that is approximated to complex non-linear epipolar geometry) is established by exterior orientation parameters (EOPs) to minimize search area, the matching is tarried out based on this line. The experiment on matching size is performed according to land cover property, which is divided off into four areas (water, urban land, forest land and agricultural land). In each of the test areas, window size for the highest correlation coefficient is selected as propel size for matching. As the results of experiment, the proper size was selected as $123{\times}123$ pixels window, $13{\times}13$ pixels window, $129{\times}129$ pixels window and $81{\times}81$ pixels window in the water area, urban land, forest land and agricultural land, respectively. Of course, determination of the matching size by the correlation coefficient may be not absolute appraisal method. Optimum matching size using the geometric accuracy therefore, will be presented by the further work.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.747-752
• /
• 2011

The position detection of overlapping area in the interframe for image stitching using auto and cross correlation function (ACCF) and compounding one image with the stitching algorithm is presented in this paper. ACCF is used by autocorrelation to the featured area to extract the filter mask in the reference (previous) image and the comparing (current) image is used by crosscorrelation. The stitching is detected by the position of high correlation, and aligns and stitches the image in shifting the current image based on the moving vector. The ACCF technique results in a few computations and simplicity because the filter mask is given by the featuring block, and the position is enabled to detect a bit movement. Input image captured from CMOS is used to be compared with the performance between the ACCF and the window correlation. The results of ACCF show that there is no seam and distortion at the joint parts in the stitched image, and the detection performance of the moving vector is improved to 12% in comparison with the window correlation method.