• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.335-336
• /
• 2007

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권1호
• /
• pp.139-145
• /
• 2001

The objective of experimental study is to apply simultaneous measurement by PIV(Particle Image Velocimetry) to high_speed flow characteristics within ginseng cleaner model. Three different kinds of flow rate(15. 20, 27l/min) are selected as experimental condition. Optimized cross correlation identification to obtain velocity distribution, time-mean velocity distribution, velocity, profile, kinetic energy and turbulence intensity are represented quantitatively for the deeped understanding of the flow characteristics in a ginseng cleaner model.

• 연구논문집
• /
• 통권30호
• /
• pp.59-65
• /
• 2000

The objective of experimental study is to apply simultaneous measurement by PIV(Particle Image Velocimetry)to high_speed flow characteristics within Ginseng washing machine. Three different kinds of flow rate(15,20,27 $\ell$/min)are selected as experimental conditions. Optimized cross correlation identification to obtain velocity vectors is implemented by direct calculation of correlation coefficients. Instantaneous velocity distribution, time-mean velocity distribution and velocity profiles are represented quantitatively at the full-scale region for the deeper understanding of the flow characteristics in Ginseng washing machine.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.386-393
• /
• 1996

The paper describes how a Maximum Length Sequence(MLS) and correlation technique in the form of Hadamard transformation may be applied for the measurement of airborne sound reduction. It is shown that in most cases, the values obtained by the MLS technique will be equal to the expected values obtained by the classical method. However, due to the correlation process involved, the MLS method will be much less sensitive to disturbances from extraneous noise. The described method has been implemented in an RTA acoustic analyser.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1035-1036
• /
• 2010

• Journal of Periodontal and Implant Science
• /
• 제33권4호
• /
• pp.615-624
• /
• 2003

The most accurate method to assess bone level is the histometric measurement. However it causes discomfort in patients and damage to the regenerated tissues. in the present study, we used 4 type regenerative therapies, The present study evaluated the clinical reliability and accuracy of bone probing measurements and radiographic bone level in the assessment of bone level by comparing those results with histometric confirmed bone level. Twentyfour(24) intrabony defects(4${\times}$4mm 1-wall intrabony defects) were surgically created in the mandibular second and fourth premolars of 6 beagle dogs. The control group underwent a conventional flap operation. Experimental group I was treated with calcium phosphate glass only, and while experimental group 2 was treated with GTR and experimental group 3 was treated with calcium phosphate glass and GTR. The subjects were sacrificed 8 weeks after the operation and a bone probing measurements, radiographic measurement and histometric measurement was performed. The correlation between bone probing measurements(BP) and histometric measurement(HL), and radiographic measurement(RL) and histometric measurement(HL) were analyzed with Spearman's rank correlation analysis and the statistical significance with respect to the type of regenerative therapies was analyzed with the Kruskal Wallis test. The coefficient of correlation to HL was 0.73 for RL and 0.90 for BP. The type of regenerative therapies had no significant effect on the difference between HL and other measurements. The results of this study suggests that bone probing measurements most closely represents actual bone level. So bone probing measurements may be a good clinical method for assessing the hone level following any type of periodontal regenerative therapies.

• 한국지진공학회논문집
• /
• 제13권3호
• /
• pp.11-19
• /
• 2009

최근 대형구조물의 유지관리에 대한 관심이 커지고 있으며 자연재해, 구조물의 노후 등으로 구조적 안전성의 검토가 요구되는 대형구조물의 수가 급증하고 있는 실정이다. 실제 사용하고 있는 구조물의 구조적 특성은 최초 설계 당시의 특성과 차이점을 보이는 것이 일반적이며 부재의 균열 및 구조물의 노후화 등으로 인한 강성저하에 의하여 구조물의 동특성에 변화가 나타날 수 있다. 구조물의 동특성의 변화를 관찰하면 손상의 위치를 파악할 수 있으며 정량적 평가 또한 가능하다. 교량, 건물 등 구조물 모니터링에 사용되는 대표적 계측장비가 동적계측기이다. 현재 구조용 동적계측기는 각 센서와 계측기를 1:1로 연결하는 방식을 취하고 있어 많은 케이블 작업을 필요로 하기 때문에 센서를 부착하지 않고 원거리에서 진동을 측정하는 방법이 필요하다. 구조물의 동적응답 계측을 위하여 적용 가능한 비접촉식 방법으로는 레이저의 도플러효과 및 GPS를 이용하는 방법 등이 있으나 비경제적이기 때문에 교량구조물에 적용하기에 보편적이지 못하다. 그러나 영상 이미지를 이용하는 방법은 경제적이며 접근이 어려운 구조물의 진동 및 동특성 추출에 적합하다. 기존에 도 센서를 대신하여 카메라의 영상신호를 이용하는 연구가 수행되었으나 구조물에 부착된 target의 한 지점을 기록한 후 이미지 처리기법 을 이용하여 변위응답을 측정하는 방법으로서 측정 대상이 비교적 국한적일 수 있다. 그러므로 본 연구에서 제안한 DIC(Digital Image Correlation)기법을 이용한 다중 변위응답 측정기법을 검증하기 위하여 실내모형실험을 수행하였다.

• 환경영향평가
• /
• 제15권4호
• /
• pp.271-277
• /
• 2006

In this study, we investigated the applicable plan of GIS on the environmental impact assessment of 60 Hz Powerline. So we assessed distance data based on calculations by use of 2D and 3D Geographical information systems(GIS) and distance data based on measurements on 1: 5000 maps accord with on site distance measurements to use input data for calculating magnetic field. One hundred eight of the on site measured addresses were selected from residences. The data were achieved by measuring the distance between residence and power line on maps with scales of 1: 5000. The digital map was obtained from National Geographic Information Institute with scales of 1: 5000, and we made 2D and 3D map. Correlation analyses were performed for statistical analyses. For the 3D GIS versus on site comparison of different exposure categories, 70 of 108 measurements were assigned to the correct category. Similarly for 2D GIS versus on site comparison, 71 of 108 were correctly categorized. When comparing map measurement with on site measurement, 62 of 108 were correctly categorized. When the correlation analysis was performed, best correlation was found between 3D GIS and on site measurements with r = 0.84947 (p<0.0001). The correlation between map and on site measurement yielded an r of 0.76517 (p<0.0001). Since the GIS measurements and map measurement were made from the center point in the building and the on site measurements had to be made from the closest wall on the building, this might introduce and additional error in urban areas. The difference between 2D and 3D calculations were resulted from the height of buildings.

• 한국환경과학회지
• /
• 제23권7호
• /
• pp.1339-1347
• /
• 2014

This study were performed on roadside buffer green in Songpa-dong, Songpa-gu, Seoul in order to analyze the anion concentration according to the type of composition of roadside buffer green. Buffer green separating the physical structure of the measurement points and measurement locations were separated by roadside, green interior, the other side of the road. planting density and deposit of trees per each buffer green was measured in the order of mounding type> slope type> the plain type. If the measured temperature of the location-specific weather elements roadside> inside> the other side of the road in order of measurement and the temperature is lowered farther away from the road. If the relative humidity of the road on the other side> inside> the roadside in order to measure and this is the opposite of the temperature tendency. According to physical structure reduction of the temperature on the other side of the road and roadside in order of mounding type> the plain type> slope type was measured. As a result of measuring a anion therefore concentration of the anion inside of melt is in order of mounding type> the plain type> slope type, tended to match the melt characteristics. According to measured positions anion concentration is in the order of the other side of the road> inside> the roadside was measured. As a result of correlation analysis, in the case of measurement location-specific weather and anions the temperature is positive correlation, relative humidity is negative correlation and that's results of previous studies were supported.

• 한국전자파학회논문지
• /
• 제24권1호
• /
• pp.91-97
• /
• 2013

지표면의 후방 산란 계수를 계산하는 지표면 산란 모델의 입력 변수로는 크게 수분함유량과 지표면 거칠기가 있고, 산란 계수 계산에 있어 지표면 거칠기의 영향이 수분함유량의 영향보다 크다. 본 연구에서는 지표면 거칠기의 정확한 측정 방법을 제기하고, 측정 오차를 분석한다. 이를 위하여 대표적인 지표면 거칠기 측정 장치인 pin-board profiler(1 m, 0.5 cm 간격)와 laser profiler(1 m, 0.25 cm 간격)를 이용하여 실제 지표면을 측정하였다. 두 측정 장치의 평균 차이는 유효 높이(RMS height)가 0.097 cm, 상관 길이(correlation length)가 1.828 cm이었다. 그리고 상관 함수, 상대오차를 분석한 결과, laser-profiler의 반복 측정에 대한 장치의 안전성이 더 좋았다. 두 측정 장치의 차이가 후방 산란 계수에 미치는 영향을 분석하기 위해 지표면 산란 모델을 이용하여 비교한 결과, 입사각 $20{\sim}60^{\circ}$에서 1 dB 이하의 차이를 보였다.