• 대한치과보철학회지
• /
• 제38권1호
• /
• pp.12-25
• /
• 2000

To demonstrate possible influences of general bone density on the mandible, histomorphometric analysis was carried out in mandibles and iliac bones and the correlation of the two bone densities was tested. Comparison of bony density in women and men over 60 years in the mandible was carried out too. Quantitative computed tomography(QCT) was taken in cross-section of mandibles at the same site where histomorphometric analysis was peformed to evaluate the reliability of QCT. The analysis included 40 cadavers with no known diseases affecting the bones. The subjects consisted of 15 females and 25 males with a mean age of 60.3 years. Spearman correlation analysis and Wilcoxon rank sum test was performed. The results were as follows. 1. There was statistically no correlation between the mandible and iliac bone in the values of corrected cortical width(CCW), cortical porosity(POR) in cortex, and total bone volume(TBV), mean trabecular plate thickness(MTPT), mean trabecular plate density(MTPD), and mean trabecular plate separation(MTPS) in trabecular bone. 2. Comparison of women and men over 60 years, men had statistically higher bone density than women except fir POR of buccal and lingual cortex, and WTPD of alveolar trabeculae in mandible. 3. There was statistically significant correlation between TBV of trabecular bone and CT No., but not between POR and CT No. in mandible. According to the results above, there was no correlation between mandible and iliac bone density and between mandibular bony density and age. Further studies are required to support the results. A more noninvasive method to be able to measure the bone density of mandible should be developed and it is necessary to accumulate data on the normal values of bone density of mandible according to age and sex. Further study should be carried out about QCT to measure mandibular bony density using QCT.

• 대한치과교정학회지
• /
• 제45권3호
• /
• pp.121-129
• /
• 2015

Objective: This study aimed to assess three-dimensional changes in the temporomandibular joint positions and mandibular dimensions after correction of dental factors restricting mandibular growth in patients with Class II division 1 or division 2 malocclusion in the pubertal growth period. Methods: This prospective clinical study included 14 patients each with Class II division 1 (group I) and Class II division 2 (group II) malocclusions. The quad-helix was used for maxillary expansion, while utility arches were used for intrusion (group I) or protrusion and intrusion (group II) of the maxillary incisors. After approximately 2 months of treatment, an adequate maxillary arch width and acceptable maxillary incisor inclination were obtained. The patients were followed for an average of 6 months. Intraoral and extraoral photographs, plaster models, and cone-beam computed tomography (CBCT) images were obtained before and after treatment. Lateral cephalometric and temporomandibular joint measurements were made from the CBCT images. Results: The mandibular dimensions increased in both groups, although mandibular positional changes were also found in group II. There were no differences in the condylar position within the mandibular fossa or the condylar dimensions. The mandibular fossa depth and condylar positions were symmetrical at treatment initiation and completion. Conclusions: Class II malocclusion can be partially corrected by achieving an ideal maxillary arch form, particularly in patients with Class II division 2 malocclusion. Restrictions of the mandible in the transverse or sagittal plane do not affect the temporomandibular joint positions in these patients because of the high adaptability of this joint.

• Imaging Science in Dentistry
• /
• 제33권1호
• /
• pp.35-41
• /
• 2003

Purpose: To aid in determining the volume of graft bone required before a maxillary sinus lift procedure and compare the alveolar bone height measurements taken by panoramic radiographs to those by CT images. Materials and Methods : Data obtained by both panoramic radiographs and CT examination of 25 patients were used in this study. Maxillary sinus volumes from the antral floor to heights of 5 mm, 10 mm, 15 mm, and 20 mm, were calculated. Alveolar bone height was measured on the panoramic images at each maxillary tooth site and corrected by magnification rate (PBH). Available bone height (ABH) and full bone height (FBH) was measured on reconstructed CT images. PBH was compared with ABH and FBH at the maxillary incisors, canines, premolars, and molars. Results: Volumes of the inferior portion of the sinuses were 0.55 ± 0041 ㎤ for 5 mm lifts, 2.11 ± 0.68 ㎤ for 10 mm, 4.26 ± 1.32 ㎤ for 15 mm, 6.95 ± 2.01 ㎤ for 20 mm. For the alveolar bone measurement, measurements by panoramic images were longer than available bone heights determined by CT images at the incisor and canine areas, and shorter than full bone heights on CT images at incisor, premolar, and molar areas (p<0.001). Conclusion: In bone grafting of the maxillary sinus floor, 0.96 ㎤ or more is required for a 5 mm-lift, 2.79 ㎤ or more for a 10 mm-lift, 5.58 ㎤ or more for a 15 mm-lift, and 8.96 ㎤ or more for a 20 mm-lift. Maxillary implant length determined using panoramic radiograph alone could result in underestimation or overestimation, according to the site involved.

• Journal of Radiation Protection and Research
• /
• 제40권1호
• /
• pp.17-24
• /
• 2015

To improve accuracy of dose calculation on kilovoltage cone beam computed tomography (kV CBCT) images, a custom-made phantom was fabricated to acquire an accurate CT number to electron density curve by full scatter of cone beam x-ray. To evaluate the dosimetric accuracy, 9 volumetric modulated arc therapy (VMAT) plans for head and neck (HN) cancer and 9 VMAT plans for lung cancer were generated with an anthropomorphic phantom. Both CT and CBCT images of the anthropomorphic phantom were acquired and dose-volumetric parameters on the CT images with CT density curve (CTCT), CBCT images with CT density curve ($CBCT_{CT}$) and CBCT images with CBCT density curve ($CBCT_{CBCT}$) were calculated for each VMAT plan. The differences between $CT_{CT}$ vs. $CBCT_{CT}$ were similar to those between $CT_{CT}$ vs. $CBCT_{CBCT}$ for HN VMAT plans. However, the differences between $CT_{CT}$ vs. $CBCT_{CT}$ were larger than those between $CT_{CT}$ vs. $CBCT_{CBCT}$ for lung VMAT plans. Especially, the differences in $D_{98%}$ and $D_{95%}$ of lung target volume were statistically significant (4.7% vs. 0.8% with p = 0.033 for $D_{98%}$ and 4.8% vs. 0.5% with p = 0.030 for $D_{95%}$). In order to calculate dose distributions accurately on the CBCT images, CBCT density curve generated with full scatter condition should be used especially for dose calculations in the region of large inhomogeneity.

• 대한방사성의약품학회지
• /
• 제5권2호
• /
• pp.158-162
• /
• 2019

[¹¹C]GR205171, a Neurokinin 1 (NK1) radioligand, has been known as such a promising PET probe for quantitation of NK1 receptors in the brain by positron emission tomography (PET) imaging. First trial to synthesis of [¹¹C]GR205171 was to use methylene chloride and tetrabutylammonium hydroxide for preactivation of precursor, but the result was not successful in radiochemical yield (0~25%) and unreliable. 7 years later, inorganic base (Cs₂CO₃) was tried to achieve higher radiochemical yield, and they showed higher yield (~53%). We have tried to repeat the same synthesis method, but it did not work properly, because there were the lack of the detail procedure and still reproducibility in radiochemical yield. Here we report the improved synthesis protocol to produce [¹¹C]GR205171 in high yield via commercial automated synthesizer. The sonicator which combines water heating bath was used to activate desmethyl-GR205171, and this method showed high efficiency and reasonable yields (4.7 ± 0.6%, non-decay corrected from molecular sieve trap) with >95% radiochemical purity.

• 한국운동역학회지
• /
• 제22권3호
• /
• pp.277-284
• /
• 2012

The purpose of this study was to find out the changes in beginners' batting movements after taking undergraduate baseball lectures, by comparing and analyzing the speed of bat, the angle of body and its segments, the angular velocity and so on. For this purpose, the author picked up five undergraduates who had not taken baseball lectures, and conducted three-dimension computerized tomography twice on them, that is, before and after taking baseball classes, with eight infrared cameras and two force platforms. The conclusions are, first, the time required for swing was shortened after taking the classes. Second, the maximum velocity of the bat-end was increased. Third, at the time of impact, while the rotation angles of the pelvis and the tip of left foot were increased, the left elbow had more flexion after the classes. Fourth, the size of ground reaction force was increased at the point of swing where the ground reaction force of left foot became maximized. As we can infer from these conclusions, beginners' hitting movements before taking baseball classes tended to swing only with the arms, without waist rotation and weight shift of the lower body, but after the classes, their movements were proved to be corrected into the swing using the lower body. For the future studies, the author expects a research in a close to real environment by using pitching machine.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권18호
• /
• pp.8351-8358
• /
• 2016

Electronic cleansing is an image post processing technique in which the tagged colonic content is subtracted from colon using CTC images. There are post processing artefacts, like: 1) soft tissue degradation; 2) incomplete cleansing; 3) misclassification of polyp due to pseudo enhanced voxels; and 4) pseudo soft tissue structures. The objective of the study was to subtract the tagged colonic content without losing the soft tissue structures. This paper proposes a novel adaptive method to solve the first three problems using a multi-step algorithm. It uses a new edge model-based method which involves colon segmentation, priori information of Hounsfield units (HU) of different colonic contents at specific tube voltages, subtracting the tagging materials, restoring the soft tissue structures based on selective HU, removing boundary between air-contrast, and applying a filter to clean minute particles due to improperly tagged endoluminal fluids which appear as noise. The main finding of the study was submerged soft tissue structures were absolutely preserved and the pseudo enhanced intensities were corrected without any artifact. The method was implemented with multithreading for parallel processing in a high performance computer. The technique was applied on a fecal tagged dataset (30 patients) where the tagging agent was not completely removed from colon. The results were then qualitatively validated by radiologists for any image processing artifacts.

• 대한두개안면성형외과학회지
• /
• 제17권2호
• /
• pp.77-81
• /
• 2016

Background: Asymmetry of the infraorbital rim can be caused by trauma, congenital or acquired disease, or insufficient reduction during a previous operation. Such asymmetry needs to be corrected because the shape of the infraorbital rim or midfacial skeleton defines the overall midfacial contour. Methods: The study included 5 cases of retruded infraorbital rim. All of the patient underwent restoration of the deficient volume using polyethylene implants between June 2005 and June 2011. The infraorbital rim was accessed through a subciliary approach, and the implants were placed in subperiosteal space. Surgical outcomes were evaluated using preoperative and postoperative computed tomography studies. Results: Implant based augmentation was associated with a mean projection of 4.6 mm enhancement. No postoperative complications were noted during the 30-month follow-up period. Conclusion: Because of the safeness, short recovery time, effectiveness, reliability, and potential application to a wide range of facial disproportion problems, this surgical technique can be applied to midfacial retrusion from a variety of etiologies, such as fracture involving infraorbital rim, congenital midfacial hypoplasia, lid malposition after blepharoplasty, and skeletal changes due to aging.

• 한국임상수의학회지
• /
• 제33권2호
• /
• pp.124-128
• /
• 2016

A 7-year-old intact female Maltese dog presented with a history of bite wounds. Physical examination revealed labored breathing, four puncture wounds with subcutaneous emphysema of the thorax, and paradoxical respiratory movement of the right thoracic wall. On radiography, a segmental fracture of the right 7th rib and a single fracture of the 8th rib were evident on the dorsal thorax. An inward displacement of the fractured segment and contusion of the right caudal lung lobe were identified with computed tomography. A diagnosis of pseudo-flail chest was made. Exploratory thoracotomy revealed a full-thickness muscular defect, a marked discoloration of the right caudal lung lobe, a segmental fracture of the right 7th rib, and a single fracture of the right 8th rib. Necrotic tissues were removed using surgical debridement. The fractured 7th and 8th ribs were corrected using a single interfragmentary wiring technique. The thoracic wall was reconstructed using the latissimus dorsi muscle flap. Additional thoracic stabilization using a thermoplastic splint was applied to correct paradoxical respiratory movement. The external splint was removed 4 weeks postoperatively. There was no evidence of respiratory abnormalities 18 months postoperatively.

• Bulletin of the Korean Chemical Society
• /
• 제19권9호
• /
• pp.952-956
• /
• 1998

An automated system was developed for the routine preparation of carbon-11 ($^11C$) labeled radiopharmaceuticals, which consisted of three major parts including [$^11C$]methylation of the precursor with [$^11C$] iodomethane ($[^11C]CH_3I)$, purification of the desired product and formulation of the final $^11C$ labeled radiopharmaceutical. The whole system included seven three-way slider valves, eleven solenoid valves, four pneumatic cylinders, a HPLC (High Performance Liquid Chromatography) system and a rotary evaporator. Using this system, we investigated the radiochemical synthesis of L-[$methyl-^11C$]methionine, which is the most widely used amino acid in tumor PET (Positron Emission Tomography) studies. The overall operation took 3035 min including the production of $[^11C]CH_3I$ (10.5 min) and decay-corrected radiochemical yield was 25%. The automated system we described herein can be widely utilized for the preparation of many $^11C$ labeled radiopharinaceuticals and has been shown to be efficient, reliable and easy to operate.