• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.185-192
• /
• 1999

It had found that, as a result of cross-hole tonic logging test, concrete was not filled partially within the bottom 2.0 m of the large diameter (Ø= 2,500mm) rock socketed pile, MP20-P11(socket diameter (Ø= 2,200mm), which was a pile among piles group supporting a pier of Kwangan Grand Bridge. The pile was repaired by the combined cement grout injected through the pipes for the cross-hole sonic logging test and the bore holes for core samples. A month after the cement grouting, repairing was checked by coring and cross-hole sonic logging then 3 times of grouting and 2 times of coring were, in turns, peformed, then repairing was completed successfully. The vertical compressive capacity of the repaired large diameter socketed pile was evaluated by several formulas and software ROCKET, and was more conservative than design load (1,882 ton) of MP20-P11. It is expected that, in the case of the battered socketed piles, it could be more reasonable to analyze the behaviors of a battered pile using 3-D model. A 3-D analysis will be peformed in the future study.

• 자원환경지질
• /
• 제31권6호
• /
• pp.527-534
• /
• 1998

Excavation of underground openings changes stress distribution around the opening. The survey of this disturbed zone in excavation is very important to design and construct underground facilities, such as tunnel, gas and oil storage, power plant and disposal site of high- and low-level radioactive wastes. This paper presents a zoning of rock masses with tunnel excavation using PS logging. Compressional and shear wave velocities are measured in boreholes drilled in the tunnel wall, which was constructed with blasting and/or machine excavation. The disturbed zone in excavation can be estimated by comparing PS logging data with a tomographic image of compressional wave velocity and compressional and shear wave velocities of core samples. In the side wall of tunnel, the disturbed zone reaches 1.5 m and 1.0 m in thickness for blocks of blasting and machine excavations, respectively. In the roof of tunnel, however, the disturbed zone is 1.0 m and 0.75 m thick for the two blocks. These results show that the width of the disturbed zone is larger in the side wall of tunnel than in the roof, and 1.3 to 1.5 times larger for the blasting excavation than for the machine excavation.

• 지질공학
• /
• 제23권4호
• /
• pp.329-340
• /
• 2013

국내의 이산화탄소 지중저장을 위한 후보부지로 북평분지와 포항분지가 우선 선정되어 저장성 및 안전성 평가를 위한 지질조사가 이루어졌다. 저류층 및 상부 덮개층의 역학적 안정성을 분석하기 위해 두 분지에서 회수된 시추코어를 이용하여 공극률, 탄성파 속도, 일축압축강도, 내부 마찰각 및 영률을 실내시험을 통해 측정하였다. 시추공의 전 구간에 걸쳐 실내시험을 수행하는 것이 어려우며 연속적 물리검층 자료로부터 역학적 파라미터를 직접 측정할 수도 없다. 따라서 본 연구에서는 시추코어의 실내실험으로 측정된 물리적 성질(탄성파 속도, 공극률, 동역학 영률)과 역학적 성질(일축압축강도, 내부 마찰각)간의 상관관계를 파악하여, 물리검층자료로부터 지층의 역학적 안정성 분석에 필요한 인자를 추출하였다. 기존에 제안된 여러 경험식을 본 연구의 시추코어 시험 자료와 비교하여 두 분지에 가장 잘 맞는 경험식을 산출하였다. 북평분지와 포항분지의 일축압축강도와 영률 및 공극률간의 관계는 지역에 관계없이 암종에 따라 같은 식을 따르는 경향을 보였다. 본 연구에서 산출된 경험식을 이용하여 탄성파 검층자료를 이용하여 검층 전 구간에 대하여 지층의 강도물성을 예측하였다. 예측된 강도물성은 이산화탄소의 주입 전 단계에서 지층의 역학적 안정성을 규명하기 위한 모델분석에서 입력인자로 활용될 수 있을 것으로 기대된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.352-359
• /
• 2005

In this study, seismic refraction survey and MASW at dam crest and down-hole test and cross hole test in the boring holes located in dam crest through the core are performed to fin out dynamic material properties, are needed to evaluate dynamic safety of rockfill dam using dynamic analysis method. From the field test and geophysical exploration, applied such as above, p-wave and s-wave velocity profile of each layer of dam body. Dynamic material properties, such as elastic modulus, shear modulus, poissong's ration, are obtained from p-wave and s-wave velocity profile and density profile from formation density logging test.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.56-61
• /
• 2004

In order to image the distribution of permeability in granitic rocks, we carried out two-dimensional (2D) resistivity profiling, together with in-situ permeability tests, electrical logging of boreholes, and resistivity measurements of rock core samples in a laboratory. Based on the electrical logging and in-situ permeability data from boreholes, we obtained empirical equations which relate resistivity and permeability of the granitic rocks in the area studied. We then applied the empirical equation to a 2D resistivity section, to produce a 2D permeability section of the granitic rocks. In this paper, we present details of the field data and of the procedure for conversion from the resistivity section to a permeability section. The observed relationship between resistivity and permeability of the rocks is also discussed.

• 지질공학
• /
• 제23권4호
• /
• pp.457-465
• /
• 2013

지반 조사를 위해 흔히 수집하는 지표탐사 자료, 시추조사 자료, 지질공학 자료들을 서로 상관시켜 불연속 경계면 및 암반 파쇄대등의 분포를 파악하였다. 전기비저항 입체도와 공내 영상촬영을 통해 개략적인 지질 연약대의 주향 방향을 분석하고, 시추공 사이 탄성파 토모그래피 속도와 로즈 다이어그램을 통해 지층 및 암반 파쇄대의 공간적인 분포대를 파악하였다. 암반의 동적 물성을 파악하기 위해 S-PS 검층과 ${\gamma}-{\gamma}$ 검층으로 동적 탄성계수를 계산하여 푸아송 비 및 P파 속도와의 상관관계를 알아보았다. 지층의 불연속 경계면은 타격수 N값, 개별적인 밀도나 속도 정보를 이용하여 결정하는 것 보다 물리검층에서 수집한 속도와 밀도로부터 계산한 음향 임피던스의 대비, 즉 반사계수 자료와 시각적으로 잘 상관되었다. 암반에 발달한 주요 파쇄대 구간은 그 상부 경계면이 반사계수와 최적 리커 요소파의 곱말기로 계산된 합성탄성파 트레이스에서 극성이 음인 높은 진폭과 잘 상관되었다. 합성탄성파 기록으로 해석된 주된 파쇄대는 실제로 시추 코어 자료에서 관찰된 코어손실 구간 및 공내 영상촬영 자료에서 평가된 낮은 암질 구간과 잘 부합되었다.

• Journal of the korean society of oceanography
• /
• 제38권4호
• /
• pp.166-172
• /
• 2003

Multi­Sensor Core Logger (MSCL) is a useful system for logging the physical properties (compressional wave velocity, wet bulk density, fractional porosity, magnetic susceptibility and/or natural gamma radiation) of marine sediments through scanning of whole cores in a nondestructive fashion. But MSCL has a number of problems that can lead to spurious results depending on the various factors such as core slumping, gas expansion, mechanical stretching, and the thickness variation of core liner and sediment. For the verification of MSCL data, compressional wave velocity, wet bulk density, and porosity were measured on discrete samples by Hamilton Frame and Gravimetric method, respectively. Acoustic impedance was also calculated. Physical property data (velocity, wet bulk density, and impedance) logged by MSCL were slightly larger than those of discrete sample, and porosity is reverse. Average difference between MSCL and discrete sample at both sites is relatively small such as 22­24 m/s in velocity, $0.02­-0.08\;g/\textrm{cm}^3$ in wet bulk density, and 2.5­2.7% in porosity. The values also show systematic variation with sediment depth. A variety of factors are probably responsible for the differences including instrument error, various measurement method, sediment disturbance, and accuracy of calibration. Therefore, MSCL can be effectively used to collect physical property data with high resolution and quality, if the calibration is accurately completed.

• 자원환경지질
• /
• 제26권2호
• /
• pp.207-215
• /
• 1993

In modem petroleum reservoir engineering, the characterization of reservoir heterogeneities is very important to accurately understand and predict reservoir production performance. Formation evaluation for the description of reservoir is generally conducted by performing the analysis of well logging, core testing, and well testing. However, the measured data points by well logging or core testing are in general very sparse and hence reservoir properties should be interpolated and extrapolated from measured points to uncharacterized areas. In assigning the data for the unknown points, simple averaging technique is not feasible as optimum estimation method since this method does not account the spatial relationship between the data points. The main goal of this work is to develop PC-version of multi-purpose geostatistical model in which several stages are systematically proceeded. In the development of model, the simulator employs a automatic selection of semivariogram function such as exponential or spherical model with the best values of $R^2$. The simulator also implements a special algorithm for the fitting of semivariogram function to experimental sernivariogram. The special algorithm such as trial and error scheme is devised since this method is much more reliable and stable than Gauss-Newton method. The simulator has been tested under stringent conditions and found to be stable. Finally, the validity and the applicability of the developed model have been studied against some existing actual field data.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.693-696
• /
• 2005

KIGAM (Korea Institute of Geoscience and Mineral Resources) launched a new project to develop the low-temperature geothermal water in the area showing high geothermal anomaly, north of Pohang city, for large-scale space heating. Surface geologic and geophysical surveys including Landsat 1M image analysis, gravity, magnetic, Magnetotelluric (MT) and controlled-source audio-frequency MT (CSAMT), and self-potential (SP) methods have been conducted and the possible fracture zone was found that would serve as deeply connected geothermal water conduit. In 2004, two test wells of 1.1km and 1.5km depths have been drilled and various kinds of borehole survey including geophysical logging, pumping test, SP monitoring, core logging and sample analysis have followed. Temperature of geothermal water at the bottom of 1.5km borehole reached over $70^{\circ}C$ and the pumping test showed that the reservoir contained huge amount of geothermal water. Drilling for the production well of 2 km depth is on going. After test utilization and the feasibility study, geothermal water developed from the production well is going to be provided to nearby apartments.

• 한국지반공학회논문집
• /
• 제33권12호
• /
• pp.127-139
• /
• 2017

고양 지역의 화강 풍화암 지층을 대상으로 시추조사 및 다양한 현장 시추공 시험(프레셔미터시험, 공내전단시험, Downhole test, Suspension PS 검층, 밀도검층)을 수행하였고, 채취한 풍화암 코어시료에 대한 X선 형광분석을 실시하여 풍화도를 평가하였다. 현장 시추공 시험 결과로부터 변형계수, 전단강도 정수, 전단파 속도 등을 평가하였고, 심도에 따라 각 지반특성 값이 증가하는 경향을 확인하였다. X선 형광분석을 통해 산정한 화학적 풍화지수는 심도에 따라 풍화도가 감소하는 일반적인 경향을 나타냈으며, 대표적 풍화지수인 VR과 풍화암의 지반특성과의 관계를 분석하였다.