• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.1-9
• /
• 2006

본 연구의 목적은 여러 가지 비행 모드 상의 로터 성능을 효율적으로 예측하는 것이다. 헬리콥터의 공력 특성을 예측하기 위한 비정상 source-doublet 패널 기법 기반의 수치 기법을 개발하였다. 후류의 형상 예측에는 시간 전진 자유후류모델이 사용되었다. 점성에 의한 확산을 고려한 후류의 roll-up 모사를 위하여 후류의 doublet 패널은 같은 강도의 와류고리로 대체하여 계산하였다. 후류와 양력면의 충돌 문제는 표면격자 내부에 들어간 와류고리의 포텐셜값을 제거하여 해결하였다. 제자리비행의 해석 시에 나타나는 와류 불안정성의 해결에는 slow starting과 vortex core growth 모델을 사용하였다. 로터 공력 해석 프로그램은 제자리비행과 전진비행에 대한 실험 결과와 비교하여 검증하였으며, 실험치와 일치하는 결과를 얻을 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.203-205
• /
• 1999

In this paper, voltage source FEA considering magnetic hysteresis characteristics is presented. Magnetization dependent model is used as a hysteresis model. The unknowns in finite element equation are the magnetic vector potential and current. Core model is analyzed and current waveform is compared with the experimental one. It is found that current can be accurately predicted with the voltage variation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.609-612
• /
• 2001

Rogowski coil is made having no ferromagnetic material in a core. So the coil cannot be driven into saturation. This result in that Rogowski coils may be calibrated at relatively low currents, and used with confidence at very high currents. However the lowest level of current that can be measured is limited by the sensitivity of the voltage measuring instrument and system noise. Therefore, geometrical effects were investigated in order to measure high sensitivity of low level current and the significant source of error wa examined as well. n the results, the source of error was associated with coil designs, i.e. shape and uniformity of coil and a geometrical location of current source inside and outside of the Rogowski coil.

• Nuclear Engineering and Technology
• /
• v.30 no.2
• /
• pp.140-147
• /
• 1998

Basic concept of a cold neutron source for a 30 MW heavy water moderated reactor (HANARO) is developed. The source is a cold bottle located in a vertical hole near the reactor core. Since the bottle does not have sufficient volume for cooling, the optimum liquid mixture ratio is studied between liquid hydrogen and liquid deuterium. We also studied the variation of the gain depending on the volume of the bottle. The calculation is performed by a coupled MCNP model and by a semi-analytic approach. For the current geometry, 80% liquid deuterium mixture with liquid hydrogen gives the highest gain at 10 A neutron wave.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.85.2-85.2
• /
• 2019

We developed a new grid-based Monte Carlo code to trace far UV He II line photons that are incident on a thick H I region and subsequently transferred through Rayleigh and Raman scattering with atomic hydrogen. In particular, we consider a neutral region that is moving away from the He II emission source which is either monochromatic or is described by a Gaussian profile. The resultant Raman scattered He II line profiles from a monochromatic source are characterized by a double peaked core part with an extended Raman red tail that is attributed to multiple re-entry events. Complicated behaviors are observed in the case of a Gaussian He II source including the formation of a secondary red peak near the Balmer center dependent on the H I column density. A preliminary application of our results to the CFHT data of the planetary nebula IC 5117 is presented.

• Journal of Radiation Protection and Research
• /
• v.42 no.2
• /
• pp.106-113
• /
• 2017

Background: Interfacing-system loss-of-coolant-accident (ISLOCA) has been identified as the most hazardous accident scenario in the typical PWR plants. The present study as an effort to improve the knowledge of the source term to the environment during ISLOCA focuses on an improvement of the estimation method. Materials and Methods: The improvement was performed to take into account an effect of broken pipeline and auxiliary building structures relevant to ISLOCA. An estimation of the source term to the environment was for the OPR-1000 plants by MELOCR code version 1.8.6. Results and Discussion: The key features of the source term showed that the massive amount of fission products departed from the beginning of core degradation to the vessel breach. Conclusion: The release amount of fission products may be affected by the broken pipeline and the auxiliary building structure associated with release pathway.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.629-631
• /
• 2015

In this proceedings, preliminary results of the KVN Source-Frequency Phase-Referencing (SFPR) observation of 3C 66A and 3C 66B are presented. The motivation of this work is to measure the core-shift of these 2 sources and study the temporal evolution of the jet opacity. Two more sources were observed as secondary reference calibrators and each source was observed at 22, 43, and 86 GHz simultaneously. Our preliminary results show that after using the observations at the lower frequency to calibrate those at the higher frequency of the same source, the residual visibility phases for each source at the higher frequencies became more aligned, and the coherence time became much longer; also, the residual phases for different sources, within 10 degrees angular separations, follow similar trends. After reference to the nearby calibrator, the SFPRed maps were obtained as well as the astrometric measurements, i.e. the combined coreshift. The measurements were found to be affected by structural blending effects because of the large beamsize of KVN, but this can be corrected with higher resolution maps (e.g. KAVA maps).

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.36.3-37
• /
• 2015

4C39.25 (0923+392) is a distant radio loud AGN placed at redshift 0.695. The motivation of our work is peculiar properties 4C39.25. Firstly, it has a conspicuous distinction of jet direction between kilo-parsec scale observation made by VLA (Kollgaard et al. 1990) and the parsec scale observation by VLBA (Kellermann et al. 1998). This might indicate episodic-jet activity which recently turned on. This object currently shows two stationary compact parsec-scale components which are bright jet component on east and less luminous core on west. Also, it is known that there have been superluminal jet components which are flowing from the core toward east, and then merging with the bright jet component (Marscher et al. 1991, Alberdi et al. 2000, Lister et al. 2013). Although 4C39.25 seems to be a blazar-like source having broad emission lines (SDSS) and superluminal motion, its property that jet component is brighter than the core is different from ordinary blazars. Furthermore, it has young radio galaxy-like properties such as non-variation in total flux (Alberdi et al. 1997, 2000, MOJAVE database) and high frequency peak at spectral energy distribution (Orienti et al 2007). Such complex properties led us to make recent observations to reveal precise properties and new changes of the source. We used Korean VLBI Network (KVN) and VLBI Exploration of Radio Astronomy (VERA) Array (KaVA) which provide high-frequency (23GHz and 43GHz) and high spatial resolution (1.2mas and 0.6mas). Therefore, this system is suitable for morphological and physical research on parsec scale structure. We present results for several epochs observed during 2013 to 2014, mainly focusing on morphological changes of 4C39.25 using KaVA images.

• Journal of the Korean Society for information Management
• /
• v.16 no.2
• /
• pp.183-199
• /
• 1999

The three key parts of citation index are the Citation Index, the Source Index and the Permuterm Subject Index. To identify the core elements for citation index database system, it analyzed the items that have been cited in references and source items of Journal of the Korean Society for Information Management from vol. 1 no. l(1984) to vol. 15 no. 3(1998). Ten core elements were identified and the description format was specified respectively. The core elements are author, organization that the author is affiliated, title of article, title or journal, volume/numberlpage numbers, year of publication, keyword, language, subject category, statistics of references in article. Also, characteristics of errors in reference citations were analyzed and categorized in the viewpoint of the citation index development of academic journals in Korea.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.287-292
• /
• 1997

This study was tried to form the silica waveguide using high density plasma. Plasma characteristics have been investigated as a function of etch parameters using a single Langmuir probe and optical emission spectroscopy(OES). As etch parameters, $CF_4/CHF_3$ ratio, bias power, and source power were chosen as main variables. The oxide etch characteristics of inductively coupled plasma(ICP) dry etcher such as the etch rate, etch profile, and surface roughness were investigated s a function of etch parameters. On the basis of these results, the core pattern of the wave guide composed of $SiO_2-P_2O_5$ was formed. It was confirmed that the etch rate of $SiO_2-P_2O_5$ core layer was 380 nm/min and the aluminum selectivity to oxide, that is, mask layer was approximately 30:1. The SEM images showed vertical etched profiles and minimal loss of pattern width.