• Journal of the korean society of oceanography
• /
• v.31 no.3
• /
• pp.134-143
• /
• 1996

Sediment cores were collected from one site each in Amursky and Ussuriysky Bays in the Peter the great Bay for $^{210}Pb$, org C, N, biogenic Si, ${\delta}^{13}$C and ${\delta}^{15}$N analysis to elucidate the processes of biogenic particulate matter accumulation and early diagenetic change in the upper sediment column. Biogeochemistry at the core sites of both bays shows differences in sedimentation rate, sediment mixing, and diagenetic processes of particulate biogenic matter. Sedimentary organic matter at the core sites in both bays appeared to be largely derived from marine origin. Sedimentation rates are 173 and 118 mg $cm^{-2}$ $yr^{-1}$(0.13 and 0.11 cm $yr^{-1}$) in Amursky and Ussuriysky Bays, respectively. The surface mixed layer in the core top was present in Amursky Bay but not in Ussuriysky Bay. At the core site in Amursky Bay, incorporation of biogenic particulate matter into the sediment from the overlying waters is 236, 19, 142 mmol $cm^{-2}$ $yr^{-1}$ for organic C, N, and biogenic Si, respectively. Of which about 70${\%}$ of organic C and biogenic Si are degraded within the upper 25 cm sediment and the rest are buried at 25 cm sediment horizon. At the core site in Ussuriysky Bay, incorporation of biogenic particulate matter into the sediment from overlying waters is 164, 18, 76 mmol $cm^{-2}$ $yr^{-1}$ for organic C, N, and biogenic Si, respectively. Of which less than 50${\%}$ of organic C and biogenic Si are degraded within the upper 25 cm sediment and the remainder are buried at 25 cm sediment horizon. This large difference of degradation of biogenic matter in the upper 25 cm sediment column appears to be resulted from the difference in sediment mixing rates between the two cores.

• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1333-1337
• /
• 2002

A significant fraction of nutrients, such as nitrogen and phosphorus released from sediment are utilized by primary production in the shallow water of coast and lake. The purpose of this study is to introduce the mechanism of nutrients release from sediment and to introduce the methods of the measurement of nutrient released from sediment. One approach is to calculate nutrients released from sediment by a concentration gradient between sediment pore waters and overlying water based on the Fick's law. The other approaches of measurement are the undisturbed sediment core experiments and measurement of nutrient released from sediment by the in situ chamber equipment.

• Journal of Wetlands Research
• /
• v.15 no.4
• /
• pp.441-451
• /
• 2013

Samples for estimating concentrations of polycyclic aromatic hydrocargons(PAHs), total petroleum hydrocarbons(TPHs), and benzene-toluene-ethylbenzene-xylene(BTEX) were collected at the tidal flat sediments of 8 coastal sites in Incheon, at seventy-two sampling stations for the surface sediment and twenty-four stations for the sediment core, twice in the spring and fall in 2011. This study was performed to evaluate the distributions of seasonal and spatial concentrations of PAHs, TPHs, and BTEX in the tidal flat sediments. The source origin of PAHs were carried out. The total average concentration of PAHs in the tidal flat sediment was $95.62{\mu}g/kg$. The characteristic of PAHs concentration distributions was observed that the average concentration in the autumn was lower than that in the spring, and higher concentration in the sediment core than the surface sediment, and greater vertical concentration at the top rather than the bottom in the sediment core. The total average concentration of TPHs at all sampling sites was in the value of 46 mg/kg. The characteristic of the TPHs concentration distribution was observed that the average concentration in the fall was much higher than that in the spring, and higher concentration in the surface sediment than the sediment core. The possible source of PAHs inputs were mainly derived from both pyrogenic and petrogenic origin at the surface sediment at Janghwari site and the sediment cores of both Sorae and Okyeon sites, while the rest sites of study areas originated with pyrogenic combustion.

• Journal of Environmental Science International
• /
• v.11 no.8
• /
• pp.793-800
• /
• 2002

Butyltin (BT) compounds were measured in seawater, sediment, sediment core, settling solids, and plankton from Gwangyang Bay in 2001, Tributyltin (TBT) was detected in seawater from 1 out of the 7 seawater sampling sites and in sediment from 18 out of the 35 sediment sampling sites. The highest concentration of TBT was found in the sediment from the site near Yeosu Harbor (53 ng Sn/g dry wt), acting as the point source for TBT The mean concentrations of TBT were in the order of plankton> settling solids> sediment. The degradation indexes ([DBT]+[MBT]/[TBT]) for the plankton were less than 1, indicating the possibility of recent inputs of TBT. The indexes for the sediment and settling solids ranged from 1.14 to 8.73. The composition of the BT compounds found in the settling solids was similar to that found in the sediment. The vertical profile of the total BT compounds in the sediment was characterized by an abrupt decline from the surface. However, no butyltin compounds appeared below a depth of 10 cm, corresponding to the 1980s. Accordingly, the current results demonstrated that the levels of all butyltin species in the environment of Gwangyang Bay were relatively lower than those in other polluted coastal areas. The vertical profile also suggested a fairly recent history for the down-core.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.3
• /
• pp.290-297
• /
• 2003

To describe vertical distribution of dinoflagellate cysts in bottom sediments from Gwangyang Bay, three short-core sediment samples were collected with a gravity core sampler on 24 August 2001: St. 1 core (27.5 cm) in the northeastern part of the bay, St. 14 core (30.5 cm) in the southwestern part, and St. 16 core (25.9 cm) near Yeosu Sound. Total cyst densities generally decreased from the top of the sediment samples through the bottom. The highest cyst densities were observed at 2-3 cm in St. 1 core, 4-5 cm in St. 14 core, and 0-1 cm in St. 16 core respectavely. Living cysts were observed till the bottom of the sediment samples. The increase of heterotrophic dinoflagellate cyst proportion may indicate that the eutrophication process was recently escalated in the study area.

• Water for future
• /
• v.27 no.2
• /
• pp.121-128
• /
• 1994

Reduced trend of surface velocity, length of the separated drop area and width of potential core have been verified through experimental study of flow characteristics at the step down. To inverstigate sediment behaviors, experimental study which involved accumulated sediment transport reducing water velocity in the separated drop area was performed. From the experimental results, surface velocity, length of the separated drop area and width of potential core were formulated, and calculated output was corroborated by experimental outcome. Furthermore an examination of the parameter which is defined by $q_{sf}$/$q_{uo}$ was performed by detecting sediment in the separated drop area. Therefore these experiments can express the phenomena of flow characteristics and sediment behaviors at the step down.

• Journal of Korean Society on Water Environment
• /
• v.31 no.3
• /
• pp.304-312
• /
• 2015

In this study, we tried to determine the vertical variation of sediment structure and geochemical characteristics, core sediment was collected in the Nakdong River midstream on August, 2014. Core sediment mainly composed of sand (51.48%) and silt (46.21%) and coarsing upward changed from sM to mS facies. IL and TOC were decreased from lower to upper layer. C/N ratio was lower than 10 so the organic matters were originated from underwater creatures and C/S ratio was decreased from lower to upper layer. Heavy metal (Al, Fe, Zn, Cr, Pb, Ni, Cu, Cd) content were decreased from lower to upper layer and seriously polluted condition is not. These results are thought to be due to the effect of natural and anthropogenic in the fluctuation of flow.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.4
• /
• pp.312-322
• /
• 2004

Physical and geoacoustic properties of inner shelf sediment in the South and Southeastern Seas of Korea have been studied based on six piston core samples. The sediments are largely composed of homogeneous mud except the core from the southeasternmost part of the area. Both physical and geoacoustic properties and mean grain size are relatively uniform with sediment depth, suggesting little effect of sediment compaction and/or consolidation. Mean grain size appears to be the most Important variable to determine the physical and acoustic properties. In contrast, the attenuation shows more or less fluctuations. Correlations between physical properties and sediment texture show slight deviations from those of the compared data, caused by the difference of sedimentary processes, mineral composition, and the difference of measurement system. In particular, the velocity is lower (approximately 20-30 m/s) than that of the previous data measured in the same area. This is probably due to the difference in velocity measurement system (particularly, error by a length of sample). We propose new relationships for physical and geoacoustic characteristics of shelf sediment in the study area.

• Journal of the korean society of oceanography
• /
• v.38 no.4
• /
• pp.166-172
• /
• 2003

Multi­Sensor Core Logger (MSCL) is a useful system for logging the physical properties (compressional wave velocity, wet bulk density, fractional porosity, magnetic susceptibility and/or natural gamma radiation) of marine sediments through scanning of whole cores in a nondestructive fashion. But MSCL has a number of problems that can lead to spurious results depending on the various factors such as core slumping, gas expansion, mechanical stretching, and the thickness variation of core liner and sediment. For the verification of MSCL data, compressional wave velocity, wet bulk density, and porosity were measured on discrete samples by Hamilton Frame and Gravimetric method, respectively. Acoustic impedance was also calculated. Physical property data (velocity, wet bulk density, and impedance) logged by MSCL were slightly larger than those of discrete sample, and porosity is reverse. Average difference between MSCL and discrete sample at both sites is relatively small such as 22­24 m/s in velocity, $0.02­-0.08\;g/\textrm{cm}^3$ in wet bulk density, and 2.5­2.7% in porosity. The values also show systematic variation with sediment depth. A variety of factors are probably responsible for the differences including instrument error, various measurement method, sediment disturbance, and accuracy of calibration. Therefore, MSCL can be effectively used to collect physical property data with high resolution and quality, if the calibration is accurately completed.

• Journal of Wetlands Research
• /
• v.10 no.3
• /
• pp.27-35
• /
• 2008

Sediment cores were obtained from Upo and Mokpo in Upo Wetland and core samples were divided by depth into 20 ~ 21 subsamples. The heavy metal concentrations of Fe, Mn, Zn, AS, Cu, Cd, Ni, Pb, and Cr in the sediments of each depth were determined by ICP-MS. The texture of sediemnts from Upo Wetland appeared to be clayey silt with average grain size of $7.52{\sim}11.15{\mu}m$ for physical properties. It was found to have a clear tendency of depth profile with respect to TOC and ignition loss. Organics were stabilized in the range of 0.5 ~ 0.7 % TOC and 8 ~ 9 % ignition loss in 30 years, whereas, the surficial sediments have the highest concentrations of about 3.0 % of TOC and 13 ~ 15 % ignition loss. Those are much higher than the values of the main stream, the Nakdong River, which reflects the deposit of biodegradable organics from plants and other lifes. The vertical distribution of heavy metals in two sediment cores was investigated to elucidate historical trends of heavy metals deposited into Upo wetland. The depth profile concentrations of each heavy metal were compared and discussed with the Concensus-Based Sediment Quality Guidelines for freshwater ecosystems. All the Cd data for the vertical distribution in the sediments were detected above PEC value for Cd, which predict harmful effects on sediment-dwelling organisms expected to occur frequently. The concentrations of Zn, Cu, and Cr in all sediment samples for depth profile were detected below the TEC values, which provided a basis predicting the absence of toxicity by Zn, Cu, and Cr.