• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.677-690
• /
• 2009

A previous study demonstrated that the two-row fuel assembly has much more favorable neutron-physical and thermal-hydraulic behavior than the conventional one-row fuel assemblies. Based on the newly developed two-row fuel assembly, an SCWR core is proposed and analyzed. The performance of the proposed core is investigated with 3-D coupled neutron-physical and thermal-hydraulic calculations. During the coupling procedure, the thermal-hydraulic behavior is analyzed using a sub-channel analysis code and the neutron-physical performance is computed with a 3-D diffusion code. This paper presents the main results achieved thus far related to the distribution of some neutronic and thermal-hydraulic parameters. It shows that with adjustment of the coolant and moderator mass flow in different assemblies, promising neutron-physical and thermal-hydraulic behavior of the SCWR core is achieved. A sensitivity study of the heat transfer correlation is also performed. Since the pin power in fuel assemblies can be non-uniform, a sub-channel analysis is necessary in order to investigate the detailed distribution of thermal-hydraulic parameters in the hottest fuel assembly. The sub-channel analysis is performed based on the bundle averaged parameters obtained with the core analysis. With the sub-channel analysis approach, more precise evaluation of the hot channel factor and maximum cladding surface temperature can be achieved. The difference in the results obtained with both the sub-channel analysis and the fuel assembly homogenized method confirms the importance of the sub-channel analysis.

• 대한물리의학회지
• /
• 제13권2호
• /
• pp.157-165
• /
• 2018

PURPOSE: The purpose of this study was carried out to investigate the effect of plyometric training combined with core strength training on the balance and agility of adolescent soccer players. METHODS: A total of 36 subjects participated in this study. Subjects were randomly divided 3 groups and assigned PG (plyometric training group), CSG (core strength training group) and PCG (plyometric training combined with core strength training group). Each group was assigned to 12. Intervention was performed three times a week for 4 weeks. The training was performed for 60 minutes a day. Subjects were warmed up for 10 minutes, and performed main exercise for 40 minutes. Finally, subjects performed cool-down exercise including stretching for 10 minutes. A Statistical analysis was performed the paired t-test for the comparison pre and post intervention. A comparison among the groups was using one-way ANOVA, and the LSD was used for the post-test. RESULTS: The balance and agility were statistically significant differences in all group (p<.05). There was no significant difference in the balance factors between the three groups, but there was a significant difference in the agility factor (p<.05). CONCLUSION: Plyometric training and plyometric training combined with core strength training were effective for the balance and agility of adolescent soccer players.

• 한국통신학회논문지
• /
• 제17권9호
• /
• pp.918-926
• /
• 1992

본 논문에서는 이동 통신용 소형 무선기기에 사용가능한 소형 Ferrite-core Loop 안테나를 설계 제작하고 그 특성을 고찰하였다. 안테나는 $10{\times}6{\times}15mm^3$의 크기를 갖는 loop 안테나 내부에 Ferrite core를 삽입하여 제작하였고 제작된 안테나는 $50\Omega$ 정합시 대역폭 (SWR 1.5이하)은 0.55 MHz, Q값은 280으로 동일 크기를 갖는 Loop 안테나 (BW=1.9 MHz, Q=81.4)에 비해 주파수 선택 특성이 우수하였다. 8 방향 방사특성시험 및 TEM Cell을 이용한 수신특성시험에서도 기존의 loop안테나에 비해 11dB이상 이득이 증가됨을 알 수 있었다.

• Journal of Information Technology Applications and Management
• /
• 제12권3호
• /
• pp.81-96
• /
• 2005

ASP (Application service provider) as a new type of information systems service has been popular recently and has taken a much attention of information systems professionals and researchers. One stream of the research on ASP performed by IS community dealt with utilization and benefits of ASP systems use. The other researchers argue the importance of ASP vendors' capability to provide users with appropriate services. Kern, Lacity and Willcock (2002) summarized the components of core competency of service providers based on their extensive case studies on application service providers. Also, Levina and Ross (2003) developed a value delivery process of application service Providers in their case study This study is developing Prepositions and an empirical model based on the theory of core competency from strategic management study. The dimension of core competency is composed of management competency, technical service competency and customer service competency. Each dimension is made up of competency items derived from previous studies and adapted by professionals in ASP industry. The validity of the dimensions and items in each dimension has been checked with factor analytic method for empirical test. The core competency dimensions are correlated with performance factors of application service providers including growth of revenue, asset and customer base.

• Structural Engineering and Mechanics
• /
• 제63권1호
• /
• pp.65-76
• /
• 2017

This research investigated the vibration frequency of sandwich plate made of piezoelectric fiber reinforced composite core (PFRC) and face sheets of piezomagnetic materials. The effective electroelastic constants for PFRC materials are obtained by the micromechanical approach. The resting medium of sandwich plate is modeled by Pasternak foundation including normal and shear modulus. Besides, sandwich plate is subjected to linearly varying normal stresses that change by load factor. The coupled equations of motion are derived using first order shear deformation theory (FSDT) and energy method. These equations are solved by differential quadrature method (DQM) for simply supported boundary condition. A detailed numerical study is carried out based on piezoelectricity theory to indicate the significant effect of load factor, volume fraction of fibers, modulus of elastic foundation, core-to-face sheet thickness ratio and composite materials on dimensionless frequency of sandwich plate. These findings can be used to aerospace, building and automotive industries.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.340-347
• /
• 2004

Ultra-small size, high-performance, solenoid-type RF chip inductors utilizing low-loss A1$_2$O$_3$ core materials were investigated. The dimensions of the RF chip inductors fabricated were 1.0mm${\times}$0.5mm${\times}$0.5mm and copper coils were used. The materials (96％ A1$_2$O$_3$) and shape (I-type) of the core, the diameters (40${\mu}{\textrm}{m}$) and position (middle) of the coil, and the lengths (0.35mm) of solenoid were determined by a high-frequency structure simulator (HFSS) to maximize the performance of the inductors. The high-frequency characteristics of the inductance (L) and quality-factor (Q) of the developed inductors were measured using a RF impedance/material analyzer (E4991A with E16197A test fixture). The developed inductors exhibit an inductance of 11 to 11.3nH and a qualify factor of 22.3 to 65.7 over the frequency ranges of 250 MHz to 1.7 GHz, and show results comparable to those measured for the inductors prepared by Coilcraft$^{TM}$. The simulated data described the high-frequency data of the L and Q of the fabricated inductors well.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.723-726
• /
• 2002

In this paper, a high efficiency leakage transformer for neon tube is developed to improve its power factor, to reduce its core loss and weight by using a technique of shape optimization and direction of grain-oriented silicon steel sheet. A protection circuit is designed for all types of neon transformer loaded with one or more neon lamps. Whenever the neon tube fails to be started up or comes to the life end, or encounters faults with open-circuits at the output terminals of the neon transformer, the protection circuit will be initiated to avoid more critical hazards. These neon transformers need a protection circuit to prevent from current stresses on circuit components by neon tube fail. The input of the transformer is automatically cut off when the abnormal condition occurs, preventing waste of no-load power. As the results of the study, the core weight is reduced by $11\%$, the power factor improved by $5\%$ and the efficiency increased by $6\%$ compared with the conventional type due to the employment of the grain-oriented steel sl)eel and the optimized core shape.

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1017-1023
• /
• 2018

The measurement and calculation of neutronic parameters in nuclear research reactors has an important influence on control and safety of the nuclear reactor. The power peaking factors, reactivity coefficients and kinetic parameters are the most important neutronic parameter for determining the state of the reactor. The position of the control shim safety rods in the core configuration affects these parameters. The main purpose of this work is to use the MTR_PC package to evaluate the effect of the partially insertion of the control rod on the neutronic parameters at the operating core of the Tehran Research Reactor. The simulation results show that by increasing the insertion of control rods (bank) in the core, the absolute values of power peaking factor, reactivity coefficients and effective delayed neutron fraction increased and only prompt neutron life time decreased. In addition, the results show that the changes of moderator temperature coefficients value versus the control rods positions are very significant. The average value of moderator temperature coefficients increase about 98% in the range of 0-70% insertion of control rods.

• 생명과학회지
• /
• 제32권2호
• /
• pp.94-100
• /
• 2022

B형간염바이러스(HBV)의 만성 감염은 간경화와 간세포암 발생 빈도를 현저히 높인다. HBV 감염의 임상적 결과는 숙주 유전적 요인과 바이러스의 유전자 변이, 그리고 환경적 요인 등에 결정된다. HBV 복제를 위한 HBV의 pre-genomic RNA 전사는 바이러스의 core promoter 활성화에 의해 조절된다. Core promoter 돌연변이는 급성간 질환과 간세포암 발생에 연관되어 있다. 본 연구팀은 미얀마의 HBV 감염 환자들로부터 바이러스 유전자를 획득하여 core promoter 부위의 유전자 변이들을 파악하였다. Core promoter의 상대적 유전자 활성 차이를 분석하기 위해서 core promoter를 luciferase reporter에 재조합한 시스템을 제작하였다. 분석한 core promoter의 유전자 변이들 중에서 C1731T와 G1806A 돌연변이가 HBV core promoter의 전사 활성화를 증가에 관여하였다. 돌연변이 부위를 중심으로 전사 인자들의 가능한 결합 부위 변화를 컴퓨터 프로그램 분석을 통해 조사한 결과, C/EBPβ와 XBP1 반응 부위가 새롭게 생성되었음을 도출하였다. C/EBPβ의 세포 내 발현은 C1713T 돌연변이를 가진 core promoter의 전사 활성을 증가시켰으며, XBP1 발현은 G1806A 돌연변이를 함유한 M95 promoter를 활성을 증가시켰다. HBV 감염의 치료는 약제 내성과 백신 회피 돌연변이 발생으로 문제점을 가지고 있는 상황에서, 이 연구 결과는 HBV core promoter 돌연변이의 분자생물학적 그리고 임상학적 중요성을 제공한다.

• 대한불안의학회지
• /
• 제11권1호
• /
• pp.3-11
• /
• 2015

Objective : The aim of this study was to find associations between specific symptoms and suicidal behavior by using global severity on depression scales. Methods : Data were obtained from 1,183 patients of CRESCEND study. Factor analysis of the 17-item Hamilton Rating Scale for Depression (HAM-D) and the Beck Depression Inventory-II (BDI-II) was used to compare symptom clusters between the past suicide attempters and the non-suicide attempters, among the patients with depressive disorders. Results : Factor analyses of HAM-D and BDI-II extracted three factors. Suicide attempters had significantly higher scores on core factor of HAM-D, including depressed mood, feeling of guilt, suicide, work, and activities. The higher scores on all factors of BDI-II or scores correlated with a total of 7 suicide attempts and with known risk factors for suicidal behavior. Conclusion : These findings suggest that the suicide attempters complained of more cognitive, affective, somatic symptoms on BDI-II, but the core factor on HAM-D was the only differentiated factor between the two groups. Clinician-rated scales as well as self-reported questionnaires were valid in measuring suicidal attempts, and the clinical profile may help in guiding the studies of biological correlates and the treatments to reduce suicide risk.