• 자원환경지질
• /
• 제42권1호
• /
• pp.1-8
• /
• 2009

함안광화대는 한반도 남동부 백악기 경상퇴적분지 내에 위치한다. 함안광화대에는 함동 다금속 열수 맥상 광화작용이 진행되어, 함동광물을 포함한 황화광물들과 철산화광물 및 황염광물 등이 열극을 충진하여 발달한 전기석, 석영 및 탄산염광물 맥 내에 산출한다. 본 광화대 내에는 군북, 제일군북 및 함안 광상 등이 분포한다. 광화대의 광화작용은 함철 및 함동 광화작용이 주로 진행된 광화 I 기와 주된 동광화작용이 진행되어 황화광물과 황염광물이 산출하는 광화 II 기 및 금속광물의 산출이 이루어지지 않은 방해석맥으로 이루어진 광화 III 기로 구분된다. 광물공생관계와 광물의 지화학적 조성특성 등이 고려된 열역학적 연구결과 주된 함동광물인 황동석의 침전은 약 $350^{\circ}C$ 에서 시작되어 약 $250^{\circ}C$ 까지 진행되었다. 동은 주로 염화복합체로 이동되었으며, 상기 온도의 냉각과정에 수반된 지화학적 환경요인 ($fs_2$, $fo_2$, pH 등)들의 변화에 의한 함동 염화복합체의 용해도 감소에 의하여 침전되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.869-875
• /
• 2012

In the past decades, extensive studies on convection heat transfer on internal flow have been conducted by using high specific surface area, by increasing heat transfer coefficient and swirl flow, and by improving the transport properties. In this study, we applied a tangential slot swirl generator to improve heat transfer in a horizontal circular copper tube. The Al-Mg particles (approximately $100{\mu}m$ to $130{\mu}m$) were employed for this experimental work. The copper tube was heated uniformly by winding a heating coil with a resistance of 9 ohm per meter for heat transfer. Using Al-Mg particles, experiments were performed in the Reynolds number range of 5,000 to 13,130, with and without swirl. Experimental data transfers or comparisons between Nusselt numbers with and without swirl along the test tube and Reynolds numbers are presented. The Nusselt number is improved by increasing Reynolds numbers or swirl intensities along the test tube.

• 한국가시화정보학회지
• /
• 제10권3호
• /
• pp.16-20
• /
• 2012

In the past decades, extensive studies on convection heat transfer on internal flow have been conducted by using high specific surface area, by increasing heat transfer coefficient and swirl flow, and by improving the transport properties. In this study, we applied a tangential slot swirl generator to improve heat transfer in a horizontal circular copper tube. The Al-Mg particles (approximately $100{\mu}m$ to $130{\mu}m$) were employed for this experimental work. The copper tube was heated uniformly by winding a heating coil with a resistance of 9ohm per meter for heat transfer. Using Al-Mg particles, experiments were performed in the Reynolds number range of 5,000 to 13,130, with and without swirl. Experimental data transfers or comparisons between Nusselt numbers with and without swirl along the test tube and Reynolds numbers are presented. The Nusselt number is improved by increasing Reynolds numbers or swirl intensities along the test tube.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.98-105
• /
• 2003

In the experimental study, wire EDM was conducted for cold die steel by changing the Wire electrode, peak discharge current and number of finish cut. From the micro structure analysis of SEM photographs, the size of irregular welded and added component on the EDMed surface is decreasing and size of EDMed plane surface is increasing as the decreasing peak current and increasing number of finish cut. From the analysis of coating effect, Zn component is highly contained in Br and Zn Wire EDMed surface and copper component is highly contained in Br and Al wire EDMed surface. Hardness values are Increasing as the increasing peak current and decreasing the number of finish cut The value of hardness is decreasing as Cu, Al, Zn and Br wire electrode because of the residual austenite effect of solid solution copper on solidification, and finally EDMed surface has the highest hardness values for every wire electrode. Yield strength values becomes larger and bending strength values become smaller due to the increasing the hardness. These results are increased as increasing brittleness with hardness.

• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1662-1669
• /
• 2005

Boiling heat transfer characteristics of a two-phase closed thermosyphons with various helical grooves are studied experimentally and a mathematical correlation is developed to predict the performance of such thermosyphons. The study focuses on the boiling heat transfer characteristics of two-phase closed thermosyphons with copper tubes having 50, 60, 70, 80, 90 internal helical grooves. A two-phase closed thermosyphon with plain copper tube having the same inner and outer diameter as those of grooved tubes is also tested for comparison. Water, methanol and ethanol are used as working fluid. The effects of the number of grooves, various working fluids, operating temperature and heat flux are investigated experimentally. From these experimental results, a mathematical model is developed. In the present model, boiling of liquid pool in the evaporator is considered for the heat transfer mechanism of the thermosyphons. And also the effects of the number of grooves, the various working fluids, the operating temperature and the heat flux are brought into consideration. A good agreement between the boiling heat transfer coefficient of the thermosyphon estimated from experimental results and the predictions from the present mathematical correlation is obtained. The experimental results show that the number of grooves, the amount of the working fluid and the various working fluids are very important factors for the operation of thermosyphons. Also, the thermosyphons with internal helical grooves can be used to achieve some inexpensive and compact heat exchangers in low temperature.

• 한국기계가공학회지
• /
• 제21권3호
• /
• pp.1-11
• /
• 2022

In this study, an electric resistance dual-spot welding process using a copper electrode inserted in a heating electrode is suggested for the spot welding of AZ31 magnesium sheets. This spot-welding process involves two heating methods for welding at the interfacial zone between the magnesium sheets, one of which is the heating method by thermal conduction from the heating electrode heated by the welding current induced to the steel electrode, and the other heating method uses the electric resistance between the contacted surfaces of the two sheets by the welding current induced to the copper electrode. This welding process includes the welding variables, such as the current induced in the heating electrode and the copper electrode, and the outer diameters of the heating electrode. This is because the heat conducted from the heating electrode can be maintained at a higher temperature in the welding zone, which has a slow cooling effect on the nugget of the melted metal after the welding step. The pressure exerted during the pressing of the magnesium sheets by the heating electrode can be increased around the nugget zone at the spot-welding zone. Thus, it not only reduces the warping effect of the elastoplastic deformation of sheets, but also the corona bond can make it less prone to cracking at the welded zone, thereby reducing the number of nuggets expelled out of the corona bond. In conclusion, it was known that an electric resistance dual spot welding process using the copper electrode inserted in the heating electrode can improve the welding properties in the electric resistance spot welding process of AZ31 magnesium sheets.

• 농약과학회지
• /
• 제18권4호
• /
• pp.404-408
• /
• 2014

석회보르도액 처리에 따른 토양 화학성의 변화는 거의 없었으나, 석회보르도액의 주성분인 구리의 함량은 지속적으로 증가하였다. 3년간 총 33회 살포하였을 때, 토양 10 cm 이내 토양의 구리함량은 최고 73.3 mg/kg까지 증가하였다. 무처리 토양 내 구리함량이 0~1.5 ppm 정도인 것에 비하여 많이 증가하였으나, 토양오염우려수준(150 ppm)보다는 낮았으며, 인삼체내 구리함량도 9.9~23.0 mg/kg으로 무처리구의 8.38~11.39 mg/kg에 비하여 크게 늘어나지 않았다.

• Restorative Dentistry and Endodontics
• /
• 제8권1호
• /
• pp.89-96
• /
• 1982

The purpose of this study is to identify the phases of four different types, low-copper lathe cut (Type II, class 1) and spherical (Type II, class 2) amalgam alloys which are made by Caulk company and high copper Dispersalloy (Type II, class 3) made by Johnson & Johnson and Tytin (Type I, class 2) made by S.S. White and to determine the Vickers hardness number on the individual phase and four different types of dental amalgam. After each amalgam alloy and Hg measured exactly by the balance was triturated by the mechanical amalgamator (De Trey), the triturated mass was inserted into the cylindrical metal mold which was 4 mm in diameter and 12mm in height and was pressed by the Instron Universal Testing machine (Model 1125) at the speed of 1mm/minute with 143$kg/cm^2$ according to the A.D.A. Specification No. 1. The Specimen removed from the mold, mounted and stored in the room temperature for 7 days. The speciman was polished with the emery paper from #220 to #1200 and finally on the polishing cloth with 0.3 and 0.05 um $Al_2O_3$ powder suspended in water. And then each specimen was etched by Allan's method and washed with Sodium Bisulfinite for 30 seconds. Finally differentiation and metallography on each phase were obtained by using metallographical microscope (Versamet, Union) and microhardness was obtained by using microhardness tester (MVH-2, Torsee). The results were as follows: 1. In the low-copper amalgam, the ${\gamma}$, ${\gamma}_1$ and ${\gamma}_2$ phase were observed and in the high-copper amalgam, the ${\gamma}$, ${\gamma}_1$. ${\epsilon}$ and ${\eta}$ phases were observed but ${\gamma}_2$ phase was not observed. 2. Among the microhardness of each amalgam phase measured under pressing a vickers diamond indenter with 2.0gm load for 30 seconds, e phase has the highest V.H.N (314 ${\pm}$ 20), and in low-copper amalgam 12 phase has the lowest V.H.N. (29${\pm}$1) and ${\eta}$ phase which was observed in high-copper amalgam has 230${\pm}$13 V.H.N and this phase is considerd to contribute to strengthen the handness in amalgam. 3. The V.H.N. measured under pressing a Vickers diamond indenter with 300.0gm load for 30 seconds in low-copper amalgam was lower than that of high-copper amalgam.

• 동굴
• /
• 제8호
• /
• pp.77-84
• /
• 1998

A large number of lava tubes in southwestern idaho contain some extremely impressive secondary mineral deposits. Gypsum and mirabilite can be found coating entire lava formation and in some cases entire rooms, thenardite and cristobolite can also be found throughout idaho's lava tubes, although in smaller individual concentrations. To a lesser degree iron and copper-based deposits have been found. On rare occasions and in very small quantities calcium carbonate deposits have been found.(omitted)

• 한국동물학회지
• /
• 제16권2호
• /
• pp.79-96
• /
• 1973

붕어(Carassius carassius)에 미치는 동의 영향을 밝히기 위하여 다음과 같은 연구를 하였다. 1) 셀루로오스 아세테이트 전기영동법에 의한 젖산수소이탈효소 아이소자임 상, 2) 분광비색법에 의한 LDH활성과 LDH효소계에 대한 동의 영향, 3) 한천 박층 전기영동법에 의한 에스테라아제 아이소자임 상, 4) 전분 겔 전기영동법에 의한 혈색소 상, 및 5) 조직 학적 연구. 1. LDH 아이소자임 영동대는 정상 붕어의 아가미에 2개 (LDH-3 및 LDH-5), 간에 3개(LDH-2, LDH-4, 및 LDH-5), 그리고 근육에서 2개 (LDH-3 및 LDH-4) 나타났다. LDH-1은 이상의 세가지 조직에서 나타나지 않았다. 동을 처리한 붕어의 간에서는 LDH-3이 나타났고 근육에서는 LDH-5가 나타났다. 그러나 아가미에서는 새로운 영동대가 나타나지 않았다. 2. LDH활성은 정상 붕어의 아가미, 간, 및 근육 중 아가미에서 가장 낯았고 근육에서 가장 높았으며, 아가미를 제외한 간과 근육에서는 1일부터 10일간의 동처리에 따라 점차적으로 감소되었다. 3. 동을 처리한 붕어의 간과 근육의 LDH활성 감소는 주로 체내 M-LDH에 대한 동의 억제에 기인된다. 4. 정상 붕어의 아가미, 간, 근육, 혈액, 뇌, 및 신장의 에스테라아제 아이소자임 영동대 수는 각각 3,6,2,2,2 및 2개 였고 이들은 동을 처리한 경우에서도 같았다. 동처리군의 아가미, 간, 혈액 그리고 신장의 에스테라아제 영동대의 상대이동도는 대조군의 그것들과 상이하였다. 5. 정상 붕어의 혈색소 영동대는 양극에 1개 있었다. 동을 처리한 붕어의 혈색소 영동대의 이동도는 정상 붕어의 그 것보다 약간 빠른 것으로 보였다. 6. 동(20ppm)에 5일간 처리한 붕어의 조직학적 연구는 다음과 같았다. 1) 아가미에서는 처음에 표피층이 분리되었다가 분해된 후 완전히 파괴되었다. 2) 간에서는 많은 지방립이 나타났다. 3) 정상 붕어와 동에 처리된 붕어의 근육 사이에서는 조직학적 차이가 없었다. 4) 신장족직은 기부요세관에 손상을 받았다. 요세관세포의 높이가 작아진 후 요세관의 내강이 확대되었다. 많은 기부요세관이 분홍빛의 과립성 형태와 여러 단계의 변성을 나타내었다.