• The Korean Journal of Mycology
• /
• v.41 no.4
• /
• pp.295-300
• /
• 2013

This study was conducted to test effect of fungicides on the spore germination and mycelial growth of BotaniGard$^{(R)}$(Beauveria bassiana GHA). Eight fungicides, which are using for plant disease control in cucumber cultivation, with different concentration were mixed with conidia of GHA isolate for 0.5, 2, and 4 hours. The fungicides trifluminazol, fenarimol, ethaboxam, copper hydroxide and tetraconazol did significantly not inhibit on spore germination and mycelial growth. The trifluminazol, propineb and tetraconazol on high concentrations inhibited the mycelial growth of GHA. However, mixing time of fungicide with conidia of GHA did not affect in spore germination and mycelial growth. These results suggest that fungicide effect needed be checked before mycopesticide is applied in the field.

• Analytical Science and Technology
• /
• v.13 no.3
• /
• pp.297-303
• /
• 2000

Isotope-dilution inductively coupled plasma mass spectrometry was used to determine trace amounts of Cd, Cu, Pb, Ni and Zn in sediment. Sediment samples were dissolved by microwave digestion with addition of mixed acid ($HNO_3$, HF and $HClO_4$). Lead was determined after separation of alkaline and alkaline earth metals by an ammonium pyrrolidenedithiocarbarmate (APDC) solvent extraction. The other elements were determined after separation of iron, tin and titanium by hydroxide precipitation. Recovery efficiency of the analyte elements was not satisfactory, but most of matrix elements causing the isobaric interference could be effectively eliminated by the separation. Good agreement was achieved with the certified values in the analysis of the two sediment reference materials.

• Environmental Engineering Research
• /
• v.10 no.5
• /
• pp.205-212
• /
• 2005

The study was conducted to investigate the removal of heavy metals by using Hydroxyapatite(HAp) made from waste oyster shells and wastewater with high concentration of phosphorus. The maximum calcium concentration for the production of HAp in this study was released up to 361 mg/L at pH of 3 by elution experiments. When the pH was at adjusted 6, the maximum calcium released concentration was 41 mg/L. During the elution experiment, most of the calcium was released within 60 minutes. This reaction occurred at both pH levels of 3 and 6. The result of the XRD analysis for the HAp product used in this study shows the main constituent was HAp, as well as OCP. The pH was 8.6. As the temperature increased, the main constituent did not vary, however its structure was crystallized. When the pH was maintained at 3, the removal efficiency decreased as the heavy metal concentration increased. The order of removal efficiency was as follows: $Fe^{2+}$(92%), $Pb^{2+}$(92%) > $Cu^{2+}$(20%) > $Cd^{2+}$(0%). Most of these products were dissolved and did not produce sludge in the course of heavy metals removal. As the heavy metal concentration increased at pH of 6, the removal efficiency increased. The removal efficiencies in all heavy metals were over 80%. From the analysis of the sludge after reaction with heavy metals, the HAp was detected and the OCP peak was not observed. Moreover, lead ion was observed at the peaks of lead-Apatite and lead oxidant. In the case of cadmium, copper and iron ions, hydroxide forms of each ion were also detected.

• Korean Journal of Microbiology
• /
• v.37 no.4
• /
• pp.305-311
• /
• 2001

Antifungal bacterium, Bacillus subtilis YS1 was isolated from Yusong hot spring showed broad antifungal spectrum against 12 kinds of plant pathogenic fungi and Candida albicans, animal pathogen. From the gamma($Co^{60}$) radiation sensitivity test, $D_10$ value was 2.08 kGy and it survived above 20 kGy of radiation dose. Several mutants were induced by gamma radiation. Among them, YS1-1009 mutant showed resistance against tebuconazole of herbicide, increased activity against Botryoshaeria dothidea and ligninase activity. YS67 mutant was antifungal deficient auxotrophic mutants(trp-pro-or arg-ura-). From this results, it suggested that gamma irradiation could be useful method for mutant induction.

• 월간산업보건
• /
• s.8
• /
• pp.4-30
• /
• 1988

Examination of working environments was conducted to get more detailed data about harmful working environments and to make a contribution to more effective management. Study was carried out on 722 factories located in Taegu city and eight counties in Kyungpook Province, Korea, for a period of one year, from February 1 to December 30, 1986. The total number and proportion of workers exposed to harmful material was 37,697, 45.2% among 83,368 workers. The results according to exposed material were as follows: 1. In the case of noise, proportion of exceeding the 8-hour TLV was 59%, Included were nail-cutting in assembly metal manufacturing industry and weaving process in textile. 2. Dust in mill process of coal manufacturing industries exceeded the TLV of second class of dust at all parts and exceeded the TLV at 6% as a whole.: 3. The fields of industry lower than 70 lux of illumination were storage equipment of food, auto-winder of textile, painting of wood wares and coal mixing, and 44% of all cases was lower than standard. 4. As a result of temperature index investigation(WBGT), about 12% of all sujects exceeded limit value. Included parts were rolling machine and reducing room. 5. In the case of organic solvents, TLV was exceeded at about 8%, The parts exceeded TLV according to materials belonged to this category were as follows. 1) Toluene: adhesive work in assembly metal manufacturing 2) Xylene: printing and paint mixing in chemical manufacturing 3) Methyl ethytl ketone: paint mixing in all parts examined and coating machine partially in chemical manufacturing 4) Methyl isobutyl ketone: printing in chemical manufacturing 5) Acetone: vapor polishing in assembly metal manufacturing 6. Among specified chemical materials, the concentration of HC1 in the air in metal assembly manufacturing factory exceeded TLV. in one of three assembly metal manufacturing examined. Others, such as benzene, acetic acid, formic acid, sodium hydroxide, formalin, ammonia, copper, chromate etc. were lower than TLV in its indoor atmospheric concentration. As a whole, the proportion of exceeding TLV was about 0.8% 7. The concentrations of inorganic lead were lower than TLV in all parts examined. The results of this investigation show the fact that current management of working environments is not satisfactory, and so more active management is needed.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.139-142
• /
• 2006

This study was conducted to develop antibacterial hand towel and dishcloth against food poisoning bacteria, and to examine the dyeability and the antibacterial activity of cotton fabrics against food poisoning bacteria, which was dyed with 1 % extracts of Geranium nepalense at $50\;to\;60^{\circ}C$ minutes. Surface colors of cotton fabrics treated nothing, alum $[AIK(SO_4)_2{\cdot}nH_2O]$, and calcium hydroxide $[Ca(OH)_2]$ with mordants showed grayed-yellow group, that treated copper sulfate $(CUSO_4)$ with mordant was grey-brown group, and that treated sulfate of iron $(FeSO_4{\cdot}7H_2O)$ made grayed-green group. Hue value of cotton fabrics dyed with the extracts of Geranium nepalense and dried until twenty times was an order of descent Y, that dried thirty to forty an order of descent YR. Cotton fabrics dyed with the extracts of Geranium nepalense had the antibacterial activity against food poisoning bacteria such as Staphylococcus aureus, Escherichia coil and Salmonella typhimurium by over 99.99%. And that dried over thirty times showed the antibacterial activities against food poisoning bacteria by 52.91%.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.264-269
• /
• 2001

Large amounts of orange juice are produced in Japan every yea.. Accompanied by the production of orange juice, large amount of juice residues are also generated in nearly the same amounts with juice. Although, at present, some of these residues are marketed as a feed for cattle after drying and mixing with lime, the marketing price is lower than its production cost and the difference is paid by the consumers as a part of the price of orange juice. In the present work, we developed new innovative use of orange juice residue, a biomass waste, as adsorption gel for removing toxic heavy metals such as lead. arsenic, selenium and so on as well as radioactive elements such as uranium and thorium from environments. The major components of orange juice residue are cellulose. hemicellulose and pectin, which are converted into pectic. acid, an acidic polysaccharide, by means of saponification with concentrated sodium hydroxide solution. In the previous work, we found that crosslinked pectic acid gel strongly an selectively adsorbs lead over other metals such as zinc an copper. On the other hand. it is well known that polysaccharides such as cellulose can be easily phosphorylated and that phosphorylated polysaccharides have high affinity to uranium and thorium as well as some trivalent metals such as ferric iron and aluminum. Taking account of the noticeable characteristics of these polysaccharides, 2 types of adsorption gels were prepared from orange juice residue: one is the gel which was prepared by saponificating the residue followed by crosslinking with epichlorohydrin and another is that prepared by crosslinking the residue followed by phosphorylation. The former gel exhibited excellent adsorptive separation behavior for lead away from zinc owing to high content of pectic acid while the latter gel exhibited that for uranium and thorium. Both types of adsorption gels exhibited high affinity to ferric iron, which enables selective and strong adsorption for some toxic oxo-anions of arsenic (V and III), . selenium and so on via iron loaded on these gels. These results demonstrate that biomass wastes such as orange juice residue can be effectively utilized fer the purpose of removing toxic heavy or radioactive metals existing in trace or small amounts in environments.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.4
• /
• pp.321-331
• /
• 2003

We researched the variation of mineral composition with depth and the Cu adsorption behavior of Hwangto in the Okjong area, Hadong. The 4 Hwangto samples were collected from depth 10 cm, 25 cm, 2∼3 m and under 3 m from surface, and analyzed using the X­ray Diffractometer. The Hwangto samples were mostly composed of clay minerals such as kaolinite and halloysite. Two samples from 10 cm and 25 cm contained Fe or Al hydroxide minerals, for example goethite or gibbsite. As depth increases, the content of quartz decreases but that of kaolinite increases. The amount of Cu removal was rapidly rised from pH 4, and reached about 90％ at pH 6 and above 90％ at pH 7. It is regarded that the trend of Cu removal was affected by the difference in mineral composition. It was relatively well matched between experimental value and calculated value by MINTEQA2 program in the case of high Cu concentration. From this study the precipitation has important role for the removal of Cu ions, particularly in the case of high Cu concentration. However, it was discord between experimental value and calculated one in the dilute concentration circumstances. The reason may be the mistake in parameters, insufficient reaction time, and inadequate consideration of reaction site in mineral surface.

• Korean Journal of Plant Resources
• /
• v.18 no.2
• /
• pp.216-222
• /
• 2005

This study was carried out to investigate the utilization of pruned branch of a peach tree as natural dyeing material. The dyestuff was extracted from pruned branch of a peach tree. we examined the dyeing ability on silk and cotten fabrics. The surface color of silk fabrics differed depending on mordants. E values in treatments of mordants ranged from 11.63 to 30.86 as compared to non-treatment. Dyeing properties of cotten fabrics were improved with a treatment of sulfate of iron as compared with of non-treatment. The values a increased when the slaked lime and sodium hydroxide were used as mordants, while the values b increased when copper sulfate, alum and apple vinegar were used. We investigated the surface colors of silk and cotten fabrics after washing three times. In general, the surface colors of silk and cotten fabrics between the treatments of all mordants and non-treatment were diminished by the washing. We also investigated the surface colors of silk and cotten fabrics when those were washed and treated by the light after soaking those into various pH solutions. The surface colors of silk and cotten fabrics were considerably preserved by the washing, the light and pH concentration. In conclusion, our results suggest that the dyestuffs from pruning branch of a peach tree would be useful as a natural dyeing material using the optimized conditions for silk and cotten dyeing.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.71-77
• /
• 2005

This study was carried out to investigate the utilization of pruned branch of a peach tree as natural dyeing material. The dyestuff was extracted from pruned branch of a peach tree. we examined the dyeing ability on silk and cotton fabrics. The surface color of silk fabrics differed depending on mordants. E values in treatments of mordants ranged from 11.63 to 30.86 as compared to non-treatment. Dyeing properties of cotton fabrics were improved with a treatment of sulfate of iron as compared with of non-treatment. The values a increased when the slaked lime and sodium hydroxide were used as mordants, while the values b increased when copper sulfate, alum and apple vinegar were used. We investigated the surface colors of silk and cotton fabrics after washing three times. In general, the surface colors of silk and cotton fabrics between the treatments of all mordants and non-treatment were diminished by the washing. We also investigated the surface colors of silk and cotton fabrics when those were washed and treated by the light after soaking those into various pH solutions. The surface colors of silk and cotton fabrics were considerably preserved by the washing, the light and pH concentration. In conclusion, our results suggest that the dyestuffs from pruning branch of a peach tree would be useful as a natural dyeing material using the optimized conditions for silk and cotton dyeing.