• Advances in nano research
• /
• 제3권3호
• /
• pp.169-176
• /
• 2015

Iron nanoparticles were made by using the modified coprecipitation technique. Usually the characteristics of synthesised particles depend upon the process parameters such as the ratio of the iron ions, the pH of the solution, the molar concentration of base used, type of reactants and temperature. A modified coprecipitation method was adopted in this study. A magnetic stirrer was used for mixing and the morphology and nature of particles were observed after synthesis. Nanoparticles were characterised through XRD. Obtained nanoparticles showed the formation of magnetite and maghemite under citric acid and oxalic acid as stabilisers respectively. The size of nanoparticle was greatly affected by the use of different types of stabilisers. Results show that citric acid greatly reduced the obtained particle size. Particle size as small as 13 nm was obtained in this study. The effects of different kinds of nucleating agents were also observed and two different types of nucleating agents were used i.e. potassium hydroxide (KOH) and copper chloride ($CuCl_2$). Results show that the use of nucleating agent in general pushes the growth phase of nanoparticles towards the end of coprecipitation reaction. The particles obtained after addition of nucleating agent were greater in size than particles obtained by not utilising any nucleating agent. These particles have found widespread use in medical sciences, energy conservation and electronic sensing technology.

• 통합자연과학논문집
• /
• 제10권4호
• /
• pp.245-248
• /
• 2017

The Cu and CuSn/PVP nanofibers were fabricated by electrospinning method by controlling various parameters. The precursor solution was prepared with copper(II) acetate monohydrate ($Cu(CH_3COO)_2$) and tin chloride dihydrate ($SnCl_2{\cdot}2H_2O$), and polyvinylpyrrolidone (PVP) for adjusting viscosity. The fabricated nanofibers were calcined at 873 K in Ar atmospheric environment for 5 hours to remove the solvent and polymer. The morphology and diameter of nanofibers were measured by optical microscopy (OM) with Motic image plus 2.0 program. The components and chemical environment were investigated with X-ray photoelectron spectroscopy (XPS). From the XPS survey spectra, we confirmed that CuSn/PVP nanofibers were successfully fabricated. The XPS peaks of C 1s and N 1s were remarkably decreased after calcination of the nanofibers at 873 K. It implies that the PVP was completely decomposed after calcination at 873 K.

• 미생물학회지
• /
• 제15권3호
• /
• pp.123-130
• /
• 1977

In previous paper, it was reported that antibiotic substance such as tetracycline and streptomycin were produced by S'. albus subsp. and S'. globosus. And increase of mycelial growth of two strains, antibiotic production, and changes of pH range are extended to approximately 110-130 hrs in fermenting medium, there-after they decreased with culture period exception of pH range. Two Streptomyces spp. required commonly 4-5% starch as carbon sources and 1.5-2.0% soybean meal as nitrogen sources. However, 0.005-0.01M potassium phosphate dibasic, calcium carbonate (6mg/ml in S.albus subsp. and 2mg/ml in S. globosus), 0.01-0.03M, magnesium sulgate and 0.01M ferric chloride showed as optimal concentration for the growth of 2 strains. Mineral compoments such as zinc, manganese, cobalt, sodium and copper at the level of 10/sup -4/ -10/sup -6/M were observed. Especially, zinc ion showed toxicity to the growth of 2 strains at 0.005M. In relation with pH, there is a little difference in mycelial growth with cultural initial pH.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.708-712
• /
• 2015

This study reports the effects of $H_2S$ gas concentration on the properties of $Cu_2ZnSnS_4(CZTS)$ thin films. Specifically, sulfurization process with low $H_2S$ concentrations of 0.05% and 0.1%, along with 5% $H_2S$ gas, was studied. CZTS films were directly synthesized on Mo/Si substrates by chemical bath deposition method using copper sulfate, zinc sulfate heptahydrate, tin chloride dihydrate, and sodium thiosulfate pentahydrate. Smooth CZTS films were grown on substrates at optimized chemical bath deposition condition. The CZTS films sulfurized at low $H_2S$ concentrations of 0.05 % and 0.1% showed very rough and porous film morphology, whereas the film sulfurized at 5% $H_2S$ yielded a very smooth and dense film morphology. The CZTS films were fully crystallized in kesterite crystal form when they were sulfurized at $500^{\circ}C$ for 1 h. The kesterite CZTS film showed a reasonably good room-temperature photoluminescence spectrum that peaked in a range of 1.4 eV to 1.5 eV, consistent with the optimal bandgap for CZTS solar cell applications.

• 한국전기전자재료학회논문지
• /
• 제19권3호
• /
• pp.250-254
• /
• 2006

Hetero-junction sheet actuator composed of carbon nanotubes and $V_{2}O_5$ nanowires were demonstrated in a bimetal configuration. The successive filtration of $V_{2}O_5$ nanowire solution followed by carbon nanotube dispersed water solution in the same way produced a dark-gray colored sheet. A significant actuation was observed in sodium chloride electrolyte solution with a bending direction to the carbon nanotube side at the positive bias voltage against the copper counter-electrode. As the frequency of the applied voltage increased, the amplitudes decreased, indicating a rather slow response of the hetero-film actuator in the electrolyte solution. The hybrid structure enabled an easy fabrication of the film actuator with the enhanced efficiencies.

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.423-429
• /
• 2001

PbS, CuS and (Pb,Cu)S thin films were chemically deposited on glass from alkaline baths containing lead acetate, copper chloride, thiourea and triethanolamine. The deposition, optical, resistivity and thermal electric properties of these films were studied. PbS thin films showed a hexagonal structure and CuS thin films showed amorphous. The crystalline of (Pb,Cu)S thin films was obtained by heat treatment at 200$\^{C}$ and the deposition ratio of Pb to Cu showed 7:3. The energy gap of PbS, CuS and (Pb,Cu)S thin films were 1.7, 2.1 and 2.4 eV, respectively. Sheet resistance of PbS thin films was less affected on thermal annealing, but hose of (Pb,Cu)S and CuS thin films were more reduced about 3 orders of magnitude. All of those thin films indicated p type semiconductor in temperature ranging 30$\^{C}$ to 150$\^{C}$.

• Environmental Analysis Health and Toxicology
• /
• 제19권3호
• /
• pp.261-269
• /
• 2004

Although the biological functions of metallothioneins (MTs) are still being investigated, they have been suggested to be involved in detoxification of heavy metals, scavenging of free radicals, and protection against alkylating agents. MTs have been reported to be induced in most of animal tissues by heavy metals such as zinc, copper, mercury and cadmium, and the proteins have binding affinities to the metals. However, the presence or induction of MTs was reported not to be clear in leydig cells, which produce testosterone for the maturation of spermatozoa in male testes. In this study, we investigated the inducibility of metallothionein isomers by cadmium in cultured mouse leydig cells. Total RNA was extracted from the near confluent grown leydig cells and RT-PCR was Performed using the Primers which were synthesized on the basis of MT-1, 2, 3 and 4 cDNA from GenBank database. As results, MT-1 and MT-2 mRNA were found to be expressed in cadmium non-treated control cells and MT 1 mRNA expression was dose-dependent when leydig cells were treated with cadmium chloride. But MT-3 which is known to be brain specific and MT-4 which is another isoform of metallothionein, were not expressed. Other genes induced or depressed in cadmium treated leydig cells were also identified by microarray techniques.

• 분석과학
• /
• 제8권4호
• /
• pp.511-517
• /
• 1995

A cationic water soluble porphyrin (5,10,15,20-tetrakis (l-methyl-pyridinium-4-yl)porphyrin, $H_2tmpyp^{4+}$) and its metalloporphyrins (MP) were easily extracted into acetonitrile separated by addition of sodium chloride ($4mol\;dm^{-3}$) in the presence of sodium perchlorate, where M denotes $Zn^{2+}$, $Cu^{2+}$, $Co^{3+}$, $Fe^{3+}$, and $Mn^{3+}$ and $P^{2-}$ is porphyrinate ion. The extracted ion-pair complexes were completely dissociated to $[MP(ClO_4)_3]^+$, and $[MP(ClO_4)_2]^{2+}$. The extraction and the dissociation constants were determined by taking into account of the partition constant of sodium perchlorate ($K_D=1.82{\pm}0.01$). The chemical properties of the separated acetonitrile phase as $E_{T(30)}$ and $D_{II,I}$ were determined and compared with other water miscible solvents (acetone, actonitrile, 1,4-dioxane, tetrahydrofuran, 1-propanol and 2-propanol). Furthermore, a sensitive and selective method was proposed for the determination of a subnanogram amount of copper(II) in natural water samples by using the present salting-out method and the porphyrins.

• 대한영양사협회학술지
• /
• 제23권4호
• /
• pp.363-373
• /
• 2017

This study examined the characteristics of the foodservice menu items offered at senior welfare centers to provide information on Korean senior menu development. A total of 514 lunch menu items were collected from 27 senior welfare centers in April, July, October and January. The most frequently served staple foods, soups, and side dishes were multi-grain rice, seaweed soup, Bulgogi, Kimchi, and liquid yogurt. The proportions of carbohydrate, protein, and lipids of total energy serving of senior welfare centers were 59.8%: 16.7%: and 22.8%, respectively. The nutrients served at less than 40% of the Recommended Nutrient Intake (RNI) and Adequate Intake (AI) of Dietary Reference Intakes for Koreans (KDRIs) were chloride (1.0%), vitamin D (1.3%), biotin (1.7%), magnessium (4.5%), Iodine (7.5%), pantothenic acid (8.0%), vitamin E (12.5%), vitamin $B_6$ (20.0~21.4%), vitamin K (21.1~24.3%), and water (35.7~39.7%). The nutrients served in excess of the daily intake goal and RNI were iron (98.9~127.1%), sodium (104.9%), and copper (1,100.0%).

• 한국태양에너지학회 논문집
• /
• 제33권5호
• /
• pp.24-33
• /
• 2013

Renewable energy industries, including sola cell plants, has been ever increasing ones for reducing fossil fuel consumption and strengthening national energy policy. In this paper we tried to identify occupational health hazards in solar cell-related industries operated in Korea. Poly silicon, silicon ingot and wafer, solar cell and module are major processes for producing solar cells. Poly silicon operations may cause hazards to workers from metal silicon, silanes, silicon, hydro fluoric acid and nitric acid. Solar cells could not be constructed without using metals such as aluminum and silver, acids such as hydrofluoric acid and nitric acid, bases such as sodium hydroxide and potassium hydroxide, and solvent and phosphorus chloride oxide. Workers in module assembly process may exposed to isopropanol, flux, solders that contain lead, tin and/or copper. To prevent occupational exposure to these hazards, it is essential to identify the hazards in each process and educate workers in industries with proper engineering and administrative control measures.