• Journal of Dental Rehabilitation and Applied Science
• /
• 제22권2호
• /
• pp.111-123
• /
• 2006

A Study on the Fracture Strength of All-Ceramic Crown according to the Zirconia Coping Design using CAD/CAM System L. Bulgan, In-Ho Cho, Soo-Yeon Shin Department of Prosthodontics, Graduate School, Dankook University The fracture strength of prosthesis is important, because it affects the function, and long term success of prosthesis and teeth. The purpose of this study was to compare the fracture strength of zirconia coping designs. Experimental test group were classified into three designs according to coping design, Modified design: Zirconia coping margin was located at 1mm above the axiogingival line angle. Collarless design: The coping margin terminated at the axiogingival line angle Butt design: The coping margin was extended to the finishing line of prepared margin. A $Cercon^{(R)}$(Degussa, Germany) CAD/CAM system was used to make the zirconia coping. Fracture strength was measured using loading machine at a cross head speed of 1mm/min. The results were statistically analyzed using the one-way ANOVA and multiple comparison test. Statistical significance was set in advance at the probability level of less than 0.05. The result : I. Collarless($738N{\pm}155N$) and Modified($755N{\pm}185N$) groups showed significantly a lower fracture strength than Butt($1057N{\pm}262N$) group(p<0.05). II. There were no statistical differences of the fracture strength between Modified($755N{\pm}185N$) and Collarless($738N{\pm}155N$) groups. III. When comparing the fractured surface, all the group showed porcelain fracture, which were fractured at the labial surface of baked porcelain The butt design of the zirconia coping has higher fracture strength than modified and collarless design.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1577-1582
• /
• 2011

Recently rapid construction of bridge is a main interest in construction. A research on rapid construction of pier coping is urgently needed because pier, which is a bridge understructure, directly affect lane reduction and increase of social cost. Precast assembly method and pre-assembly method are the main subjects of rapid construction. But these researches have focused not on reduction of reinforcement amount, but on modifying production method of coping. Reinforcement amount of design specification is as much as that of coping under constructing. So different approach is needed for reduction of reinforcement amount. In this paper, design of pier coping using strut-tie model was proposed for reduction of reinforcement amount and improvement of constructability. Railway bridge pier coping under constructing was analyzed using a finite element method and designed using strut-tie model.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.617-622
• /
• 2000

In this study, effective compressive strength and nodal zone of Strut-and-Tie Model are studied to propose a new design method for RC T-type pier coping for prevention of sudden brittle failure. The coping which transmits loads of bridge to pier should be properly designed to retain ductile behavior. In order to carry out this proper design using STM, tie must yield before concrete fails, and a stress at strut should not exceed a certain effective stress. Therefore, reasonable determination of the effective compressive strength of strut by considering stress states at the nodal zone exactly is very important. Since conventional STM is applied under assumption that all nodes are under hydrostatic stress state, actual non-hydrostatic stress state in nodal zone caused by geometrical characteristics, loading conditions, support conditions of structures can not be considered properly. In order to apply STM for design of RC T-type pier coping, the non-hydrostatic stress state of nodal zone is considered and effective compressive strength is proposed. Then, a new design method of RC T-type pier coping which applies the principle of superposition to obtain optimum ductile behavior is rationally designed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.121-122
• /
• 2009

Currently, the design methods for coping of concrete piers predict over-reinforcements. In this study comparison and analysis of internal and external design codes is performed. Non-linear analysis using FEA and strut-tie model was done to reduce reinforcements embedded in coping of concrete piers.

• The Journal of Information Systems
• /
• 제32권4호
• /
• pp.69-94
• /
• 2023

Purpose Social networking service (SNS) platforms employ distinct networking strategies to meet the varying needs of their users, resulting in divergent sets of technological functionalities offered by each platform. Consequently, unique features on various SNSs give rise to distinct social issues. Moreover, the available technical coping mechanisms for users vary significantly across platforms. Design/methodology/approach Therefore, this study analyzes the factors affecting technical coping intention based on technical functions of SNSs for users exposed to cybercrime, such as sexual harassment. We divide coping intention into active and passive coping intention. Furthermore, this research focuses on trust as an antecedent of coping intention and verifies how human and system-like trust affects two coping intentions in different directions. Findings Findings reveal that system-like trust significantly affects both active and passive coping intention as a belief in whether the technology will work properly. However, in the case of human-like trust, trust in the platform provider was found to negatively affect passive coping, which is considered unsocialized behavior on SNS platforms. Therefore, both human-like and system-like trust for the platform must be appropriately applied to cope with the problem while activating the platform.

• Journal of Korean Academy of Nursing Administration
• /
• 제22권4호
• /
• pp.323-331
• /
• 2016

Purpose: The purpose of this study was to identify the effects of nurse's incivility experienced by nursing students and coping against incivility on burnout in clinical practice. Methods: A cross-sectional correlation study design was used. The subjects were 120 nursing student from four universities in Busan and Yangsan, South Korea. A self-report questionnaire was used to collect data on incivility, coping, and burnout. Finally total 117 nursing students' data was analyzed except 3 nursing students who had never experienced nurse's incivility for clinical practice. Data analyzed using descriptive statistics, Pearson correlation coefficient, independent t-test, ANOVA, and multiple regression. Results: 97.5% of subjects (n=120) experienced incivility. Incivility was positively correlated with seeking social support coping, avoiding focused coping and burnout. Incivility and avoiding focused coping had a significant positive effect on burnout. The explained variance for burnout was 10.0% and avoiding focused coping was the most significant factor in burnout. Conclusion: Most of nursing students experience the nurses' incivility. Judging incivility as a difficult problem to solve, students use more avoiding focused coping strategy and burnout is increased. Therefore education is needed to improve the coping strategies at incivility. Additionally colleges and hospitals should establish the formal reporting system to handle the incivility.

• Journal of Distribution Science
• /
• 제22권9호
• /
• pp.73-84
• /
• 2024

Purpose: This study aims to comprehensively analyze what small business owners experience in relation to stressors, consequences, coping methods, and situational factors. Research design, data and methodology: In this study, qualitative research methodology was used to conduct in-depth interviews with 15 small business owners who started franchise convenience stores, and classify stressors and consequences, coping methods, and situational factors based on the transactional theory of stress. Results: The results of this study are as follows. First, stressors were classified into challenge stressor and hindrance stressor. Second, stress coping methods were classified into problem-focused and emotion-focused coping methods. Among them, SBOs mainly used problem-focused coping methods. Third, consequences were classified into physiological, emotional, and behavioral tension. Lastly, the moderating factorsin the process of stress coping were resilience, social support, and positive traits. Conclusion: Theoretically, the stressors and coping methods that small business owners experience during the start-up process were confirmed from an integrated theoretical perspective. Practically, building trust relationships with SBOs and providing realistic job introductions are required at the head office level, and on the individual side, efforts are required to strike an appropriate balance between behavioral and emotional stress coping and to form a consensus with family members.

• Journal of Korean Academy of Nursing
• /
• 제26권3호
• /
• pp.709-729
• /
• 1996

This study was done to analyze the trends of research on coping in Korea, to suggest future direction, for research on coping, and ultimately to contribute to an increase in explanation of adaptation. This article reviewed 79 nursing research papers on coping done since 1978 by examining them according to the period of publication or presentation, research design, type of subjects, measurement instruments, research for a degree or not, range of reliability, and association of coping and related variables. The results are as follows : The number of studies on coping increased rapidly from the mid-1980's and decreased slowly from the mid-1990's. The maority of the studies were surveys, comparative studies, or correlational studies. The subects of the 46 studies were healthy people, while those in the remaining studies were patients with a variety of illnesses. Thirth-eight studies on coping were done for master's thesis, three for dissertion, and 38 were not degrees. The Bell and Jalowiec coping scales have not been used since the early 1990's. In contrast, Lazarus and Folkman's W.C.C.L. has been used increasingly since that time. The reliabilities of the coping scale were reported in 37 cases and the Cronbach's alpha coefficients were .71 to .86. All subjects reported using more problem-oriented coping than emotion-oriented coping in short-term or emotion-oriented coping and healthy groups did more long-term coping. It was difficult to describe consistently the relationship between stress and coping according to the type of coping scale or research subjects, but generally moderate relationships were found. This was due to instrumental problems and no consideration of situational context. The subject group who used more short-term coping and less long-term coping reported poorer mental status, and higher scores in burnout and state anxiey than others. That is, the relationship between stress and adaptation increased the power of explanation with intervening the mediating effect of coping. The association of locus of control, mastery, social support, and self-concept with coping showed positive relationships : those of uncertainty and severity in illness with coping showed negativerelationships ; those of state anxiety and depression with short-term coping were positive, and those of self-esteem with long-term coping or problem-oriented coping were negative. There were significant differences in the scores of types of coping according to religion, level of education, and socio-economic status. That is, Presbyterians and Catholics, those with higher education levels and higher socio-economic status used more long-term or problem-oriented coping. On the basis of the above findings the following recommendations are made : 1. There is a need to test the mediating effect of coping variable in order to clarify the concept. 2. Longitudinal studies are needed to determine the patterns of change in coping strategies when stressful events are encountered. 3. It's necessary to develop a reliable and variable measurement tool for coping. 4. There is a need to identify subscales of coping to increase explanation of variance 5. It's necessary to consider personal, situational, and antecedent variables : the characteristics of subject populations, the natures of illness and treatment situations. 6. The power of explanation of studies designed to identify the stress-adaptation process should be increased using the combination model of process-oriented coping and cognitive-structural model.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제42권5호
• /
• pp.884-896
• /
• 2018

This study investigates coping strategies of overweight or underweight males in Korea. For this purpose, the authors identify types of stress related to weight management. A qualitative method was utilized to collect the data related to successful weight management experiences of males aged 20-37 years. Data were analyzed based on a motivation theory of coping, which suggests coping strategy elements. The results of this study identified the stress related to weight: dissatisfaction with appearance, others' disapproval of appearance, health problems, weaker athletic ability, negative self-perception, passiveness about appearance, lower romantic attractiveness, others' disapproval of lower romantic attractiveness, weakened task execution capability, and negative stereo-types about task execution capability. In addition, six coping strategies were suggested: improved appearance, improved physical function, improved positive self-perception, more choices to improve appearance, enhanced romantic relationship, and enhanced job performance. This study shows that weight problems in modern society are diverse and complex. Therefore a man who has abnormal weight needs to clarify his stress first and then proposes strategies that are appropriate for each type of stress.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.217-220
• /
• 2005

The designer has difficulty due to inadequacy of provisions in the domestic design code and lack of understanding for behavior of D-region. The reinforced concrete pier coping consists of various failure mechanisms as the crushing or splitting from compression concrete, and shearing failure under the loading plate. However, predicting those failure mechanisms is very difficult. In this study, reinforced concrete pier coping is analyzed and designed by using strut-tie model. Adequacy for the application of strut-tie model is verified by comparison with the way used in current design practice. The results show that strut-tie model can be a rational and an economical design than current conventional design methods.