• Transactions on Electrical and Electronic Materials
• /
• 제18권5호
• /
• pp.279-286
• /
• 2017

In this paper, an optimal approach for the wide-area regulation of control devices in a transmission network is proposed. In order to realize an improved voltage profile and reduced power loss, existing devices such as tap-changing transformers, synchronous machines, and capacitor banks should be controlled in a coordinated and on-line manner. It is well-understood that phasor measurement units in transmission substations allow the system operators to access the on-line loading and operation status of the network. Accordingly, this study proposes efficient software applications that can be employed in area operation centers. Thus, the implanted control devices can be regulated in an on-line and wide-area coordinated approach. In this process, efficient objective functions are devised for both voltage profile improvement and power loss reduction. Subsequently, sensitivity analysis is carried out to determine the best weighting factors for these objectives. Extensive numerical studies are conducted on an IEEE 14-bus test system and a real-world system named the Azarbayjan Regional Transmission Network. The obtained results are discussed in detail to highlight the promising improvements.

• 한국언어정보학회지:언어와정보
• /
• 제19권1호
• /
• pp.75-101
• /
• 2015

This study investigated the distribution of subject properties in Korean. Based on the previous studies on so-called 'subjecthood diagnostics' in Korean Multiple Subject Constructions (MSCs), the current study investigates how different subject properties are distributed in single subject constructions (Non-MSCs) and MSCs. Focusing on two distinct subject properties - obligatory control (OC) of PRO and coordinated deletion (CD) - an empirical syntactic experiment was designed to test how these two subjecthood diagnostics behave in the Non-MSC and MSC environments. Seventy Korean native speakers were tested over magnitude estimation task, composed of 80 Korean sentences representing different subject properties in single or multiple subject constructions. Overall results showed (i) both OC and CD can be used as subjecthood diagnostic tests in the Non-MSC environments, but (ii) that only OC can be used as a subjecthood diagnostic test in the MSC environments.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권1호
• /
• pp.58-61
• /
• 2003

A loop power system has a nonlinear characteristics. Also it is very hard to analyse through a equation if a discontinuous characteristic of the ULTC is added to a system. However, the problem which is hard to analyse by equations can acquire the useful result with what use the genetic algorithm (GA) which is a multi-point search program. In this paper, we proved through a simulation that the proposed method can reduce an operation frequency of tap changers and improving the quality of voltage of the buses by decreasing the deviation between the actual voltage and the reference voltage through the coordinated control of the ULTC that use GA in the loop power system.

• 자동차안전학회지
• /
• 제5권2호
• /
• pp.24-31
• /
• 2013

This paper describes a coordinated control algorithm for rear-side collision avoidance. In order to assist driver actively and increase driver's safety, the proposed coordinated control algorithm is designed to combine lateral control using a steering torque overlay by Motor Driven Power Steering (MDPS) and differential braking by Vehicle Stability Control (VSC). The main objective of a combined control strategy is twofold. The one is to prevent the collision between the subject vehicle and approaching vehicle in the adjacent lanes. The other is to limit actuator's control inputs and vehicle dynamics to safe values for the assurance of the driver's comfort. In order to achieve these goals, the Lyapunov theory and LMI optimization methods has been employed. The proposed coordinated control algorithm for rear-side collision avoidance has been evaluated via simulation using CarSim and MATLAB/Simulink.

• International Journal of Control, Automation, and Systems
• /
• 제3권spc2호
• /
• pp.322-333
• /
• 2005

This paper proposes a combination of the Thyristor Controlled Series Capacitor (TCSC) and Static Var Compensator (SVC) installation for enhancing the damping performance of a power system. The developed scheme employs a damping controller which coordinates measurement signals with control signals to control the TCSC and SVC. The coordinated control method is based on the application of projective controls. Controller performance over a range of operating conditions is investigated through simulation studies on a single-machine infinite-bus power system. The linear analysis and nonlinear simulation results show that the proposed controller can significantly improve the damping performance of the power system and hence, increase its power transfer capabilities. In this paper, a current injection model of TCSC is developed and incorporated in the transmission system model. By using equivalent injected currents at terminal buses to simulate a TCSC no modification of the bus admittance matrix is required at each iteration.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.320-333
• /
• 2009

A Photovoltaic (PV) system's power output varies with the change of climate. Frequency deviations, tie line voltage swings are caused by the varying PV power when large PV power from several PV systems is fed in the utility. In this paper, to overcome these problems, a simple coordinated control method for smoothing the variations of combined PV power from multiple PV systems is proposed. Here, output power command is formed in two steps: central and local. Fuzzy control is used to produce the central smoothing output power command considering insolation, variance of insolation and absolute average of frequency deviation. In local step, a simple coordination is kept between the central power command and the local power commands by producing a common tuning factor. Power converters are used to achieve the same output power as local command power employing PI control law for each of the PV generation systems. The proposed method is compared with the method where conventional Maximum Power Point Tracking (MPPT) control is used for each of the PV systems. Simulation results show that the proposed method is effective for smoothing the output power variations and feasible to reduce the frequency deviations of the power utility.

• 한국ITS학회 논문지
• /
• 제11권5호
• /
• pp.27-37
• /
• 2012

최근 10년간 긴급차량(소방방채청 기준)의 출동 건수 및 출동 시간은 지속적으로 증가하는 추세이며, 혼잡으로 인한 출동여건은 나빠지고 있다. 특히, 일반 승용차의 양보가 힘든 상황에서 신호제어 전략은 출동시간을 줄일 수 있는 중요한 방법 중 하나로서 본 연구에서는 경찰청의 UTIS 사업과 연계하여 신호교차로에서 사용가능한 긴급차량 preemption 알고리즘을 보행자를 고려한 현시전략 및 주기 회복 전략을 고려하여 개발하였다. 또한 이를 평가하기 위한 방안으로 VISSIM을 이용하여 대전에 위치한 비연동축 및 연동축에 대하여 모의실험을 수행하였다. 모의실험의 객관적 평가를 위해 네트워크 정산 및 검증 과정을 수행하였으며, 이를 기반으로 기존 고정식 신호제어와 preemption 신호제어에서 긴급차량과 일반차량의 통행시간 및 평균지체를 검토하였다. 긴급차량의 경우 preemption 이후 주기회복에 "Add 또는 Subtract"을 사용할 경우 36.8~43.3%, "Dwell" 방식을 사용할 경우 30.7~46.0%의 통행시간 감소가 확인되었으며, 일반차량의 경우, 비연동축에서 Dwell 방식을 취할 경우 평균지체가 33.5%까지 증가하였으며, 연동축에서는 0.5% 증가만 확인되었다. 또한 비연동축에서 "Add 또는 Subtract"은 0.7%, 연동축에서는 4.5% 평균지체 증가가 확인되었다. 따라서 preemption 이후 주기회복과정은 연동축에서는 "Dwell", 비연동축에서는 "Add 또는 Subtract"의 방식이 우수할 것으로 판단된다. 그러나 연동축에 대한 명확한 구분이 어려울 경우, "Dwell" 방식의 사용은 신중히 고려되어야 할 것으로 판단된다.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.159-164
• /
• 2008

In diesel engine technology the drive to reduce emissions and fuel consumption with improved performance targets has led to many advances. In particular, Exhaust Gas Recirculation (EGR) and Variable Geometry Turbocharger (VGT) have played a key role in achieving these aims by permitting flexible control of the engine inlet gas charge. The full potential of these devices are difficult to achieve due to limitations in the classical control methods. However, fuzzy logic is particularly appealing due to its simple heuristic nature. The controller used in this work was designed using the Matlab Fuzzy Logic Toolbox. The overall object is to access the potential for emissions and fuel consumption reductions during transient events whilst maintaining and even improving driveability. Classical control methods (PID), as used on production engines, are examined and contrasted with an coordinated control that utilizes fuzzy logic.

• 전력전자학회논문지
• /
• 제18권1호
• /
• pp.63-71
• /
• 2013

This paper describes the coordinated droop control method for stand-alone type DC micro-grid to improve reliability and utilization of distributed generations and energy storage. The stand-alone type DC micro-grid consists of several distributed generations such as a wind power generation, solar power and micro-turbine, and energy storage. The proposed method which is based on autonomous control method shows high reliability and stability through coordinated droop control of distributed generations and energy storage and also capability of battery management. The operation of stand-alone type DC micro-grid was analyzed using detail simulation model with PSCAD/EMTDC software. Based on simulation results, a hardware simulator was built and tested with commercially available components and performance of system was verified.

• PNF and Movement
• /
• 제13권1호
• /
• pp.9-16
• /
• 2015

Purpose: This study aimed to examined the effects of upper and lower limb coordinated exercise of proprioceptive neuromuscular facilitation (PNF) on static and dynamic balance ability. Methods: The subjects of this study were 18 patients who had been diagnosed with a stroke and hospitalized and who had received rehabilitation treatment at D rehabilitation hospital located in J city. They were randomly and equally assigned to a PNF upper and lower limb coordinated exercise group and an ordinary central nervous system development and treatment group, and they conducted exercises for eight weeks. They carried out exercise three times per week, for 30 minutes per each time. After each four minutes of exercise, each participant was given a and rest for one minute after exercise for four minutes was given. In order to test the subjects' static and dynamic balance ability and their dynamic balance ability, frailty and injuries,: a cooperative studyies of intervention techniques (FICSIT-4) test, a four- step square test (FSST), a timed up and go test (TUG), and a TWT3M tests wasere conducted before and after the exercise. Descriptive statistics were taken for the general characteristics of the subjects, and an independent t-test was conducted both before and after the exercise in order to examine differences between the two groups before and after the exercise were conducted. The A statistical significance level was set at p= 0.05. Results: In all the tests (of FICSIT-4, FSST, TUG, and TWT3M), both the experimental group and the control group saw more improved results, but the experimental group's results were significantly higher than those of the control group, and the size of the effects was larger in the experimental group than in the control group, with statistically significant results. Conclusion: PNF upper and lower limb coordinated exercise applied to chronic stroke patients produced brought significant results in static and dynamic balance ability. PNF and is considered as an important intervention program to improve stroke patients' balance ability.