• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.5
• /
• pp.228-235
• /
• 2016

Nitrite accumulation is essential for constructing an anammox process. As the pH in the reactor exerts a complicated and strong influence on the reaction rate, we investigated its effects upon treatment of an ammonic wastewater (2,000 mgN/L) through modeling and experiment. The modeling results indicated that the reaction stability is strongly affected by pH, which results in a severe reduction of the 'stable region' of operation under alkaline environments. On a coordinate of the total ammonia nitrogen (TAN) concentration vs. pH, the maximal stable reaction rates and the maximal nitrite accumulation potentials could be found on the 'stability ridge' that separates the stable region from the unstable region. We achieved a stable and high ammonia oxidation rate (${\sim}6kgN/m^3-d$) with a nitrite accumulation ratio of ~99% when operated near the 'stability ridge'. The optimum pH that can be observed in experiments varies with the TAN concentrations utilized, although the intrinsic optimum pH is fixed. The direction of change is that the optimum operational pH falls as the TAN concentration increases, which is in excellent accordance with the observations in the literature. The optimum operational pH for 95% nitritation was predicted to be ~8.0, whereas it was ~7.2 for 55% partial nitritation to produce an anammox feed in our experimental conditions.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.316-329
• /
• 2008

Recently the increased attention pays on the processing of multiple, relatively low quantity, high value-added products resulted in adoption of batch process in the chemical process industry such as pharmaceuticals, polymers, bio-chemicals and foods. As there are more possibilities of the improvement of operations in batch process than continuous processes, a lot of effort has been made to enhance the productivity and operability of batch processes. But the chemical process industry faces a range of uncertainties factors such as demands for products, prices of product, lead time for the supply of raw materials and in the production, and the distribution of product. And global competition has made it imperative for the process industries to manage their supply chains optimally. Supply chain management aims to integrate plants with their supplier and customers so that they can be managed as a single entity and coordinate all input/output flows (of materials, information) so that products are produced and distributed in the right quantities, to the right locations, and at the right time.The objective of this study is to solve the purchase, distribution, production planning and scheduling problem, which minimizes the total costs of production, inventory, and transportation under uncertainty. And development of SCM model in chemical industry including batch mode operations. Through that, the enterprise can respond to uncertainty. Also integrated process optimal planning and scheduling model for manufacturing supply chain. The result shows that, the advantage of supply chain integration are quality matters seen by customers and suppliers, order schedules, flexibility, cost reduction, and increase in sales and profits. Also, an integration of supply chain (production and distribution system) generates significant savings by trading off the costs associated with the whole, rather than minimizing supply chain costs separately.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.2
• /
• pp.13-23
• /
• 2007

Recently there is growing Interest in LBS(Location Based Service) requiring real-time services and the spatial main memory DBMS for efficient Telematics services. In order to optimize existing disk-based multi-dimensional Indexes of the spatial main memory DBMS in the main memory, multi-dimensional index structures have been proposed, which minimize failures in cache access by reducing the entry size. However, because the reduction of entry size requires compression based on the MBR of the parent node or the removal of redundant MBR, the cost of MBR reconstruction increases in index update and the efficiency of search is lowered in index search. Thus, to reduce the cost of MBR reconstruction, this paper proposed the RSMBR(Relative-Sized MBR) compression technique, which applies the base point of compression differently in case of broad distribution and narrow distribution. In case of broad distribution, compression is made based on the left-bottom point of the extended MBR of the parent node, and in case of narrow distribution, the whole MBR is divided into cells of the same size and compression is made based on the left-bottom point of each cell. In addition, MBR was compressed using a relative coordinate and size to reduce the cost of search in index search. Lastly, we evaluated the performance of the proposed RSMBR compression technique using real data, and proved its superiority.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.12
• /
• pp.894-906
• /
• 2006

There are many difficulties to develop a mobile contents due to many constraints on mobile environments. It is difficult to make a good mobile contents with only visual reduction of existing contents on wire Internet. Therefore, it is essential to devise the data representation and to develop the authoring tool to meet the needs of the mobile contents market. We suggest the compact mobile contents to learn Chinese characters and developed its authoring tool. The animation which our system produces is realistic as if someone writes letters with pen or brush. Moreover, our authoring tool makes a user generate a Chinese character animation easily and rapidly although she or he has not many knowledge in computer graphics, mobile programming or Chinese characters. The method to generate the stroke animation is following: We take basic character shape information represented with several contours from TTF(TrueType Font) and get the information for the stroke segmentation and stroke ordering from simple user input. And then, we decompose whole character shape into some strokes by using polygonal approximation technique. Next, the stroke animation for each stroke is automatically generated by the scan line algorithm ordered by the stroke direction. Finally, the ordered scan lines are compressed into some integers by reducing coordinate redundancy As a result, the stroke animation of our system is even smaller than GIF animation. Our method can be extended to rendering and animation of Hangul or general 2D shape based on vector graphics. We have the plan to find the method to automate the stroke segmentation and ordering without user input.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.1
• /
• pp.29-42
• /
• 2003

The KSR-3 magnetometers consist of the fluxgate magnetometer (MAG/AIM) for acquiring the rocket flight attitude information, and the search-coil magnetometer (MAG/SIM) for the observation of the Earth's magnetic fluctuations. The position (latitude, longitude, and height) and flight condition (the transformation angle) of the rocket is measured after the data based on these two magnetometers are compared with IGRF The gap in the vector of magnetic field between the position of the launching point and an impact point is taken into account in data reduction. Angular variation of pitch, yaw, and roll can be researched when the data is applied to the coordinate system of the rocket.

• Korean Journal of Plant Resources
• /
• v.23 no.4
• /
• pp.360-367
• /
• 2010

The genetic diversity and structure of P. tongkangensis in 5 populations from 3 regions was investigated using 56 markers derived from 6 ISSR primers. Genetic diversity at the species level (P=94.6, SI=0.377, h=0.240) was substantial considering the limited distribution and small size of populations. Genetic differentiation among regions (12%) and among populations (13%) in the region was not clearly evident, which suggested a moderate level of gene flow among adjacent populations. The Mantel test revealed a significant correlation between genetic differentiation (${\Phi}_{ST}$) and geographic distance among populations. This was supported by cluster analysis and principal coordinate analysis (PCoA). The significant difference in marker band frequency at many loci and their fixation in opposite directions in the smallest and most isolated population SC were considered due to genetic drift. Therefore, the genetic diversity of P. tongkangensis could be compromised if the distribution area or the size of the population was further reduced. In particular, small and isolated populations could be at great risk of extinction. Considering this, the unique habitats of P. tongkangensis should be protected and the reduction of population size should be closely monitored. Conservation efforts including the seeding and planting of seedlings should be done carefully based on their genetic and ecological traits. Our data support the argument that establishing an integrated management system for the efficient conservation of P. tongkangensis is critical.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.220-226
• /
• 2013

Recently, with the rapid development of factory automation and logistics system, a few workers were able to manage the broad workplace such as large vessels and warehouse. To estimate the exact location of these workers in the conventional wireless indoor localization systems, three or more fixed nodes are generally used to recognize the location of a mobile node consisting of a single node. However, these methods are inefficient in terms of node deployment because the broad workplace requires a lot of fixed nodes compared to workers(mobile nodes). Therefore, to efficiently deploy fixed nodes in these environments that need a few workers, this paper presents a novel estimation algorithm which can reduce the number of fixed nodes by efficiently recognizing the relative coordinates of two fixed nodes through a mobile node composed of three nodes. Also, to minimize the distance errors between mobile node and fixed node, rounding estimation(RE) technique is proposed. Experimental results show that the error rate of localization is improved, by using proposed RE technique, 90.9% compared to conventional trilateration in the free space. In addition, despite the number of fixed nodes can be reduced by up to 50% in the indoor free space, the proposed estimation algorithm recognizes precise location which has average error of 0.15m.

• Korean Journal of Crystallography
• /
• v.9 no.1
• /
• pp.21-29
• /
• 1998

The rare-earth orthoborate family, RM3(BO3)4 is known to be the most promising material for the microlaser host. To grow LaSc3(BO3)4 single crystal, the phase relation of the system LaBO3-ScBO3 was investigated by DTA method. LaSc(BO3)4 was the unique intermediate compound in the binary system the peritectic reaction point of which was 1495 ±2℃. Owing to the peritectic behavior of the compound, the crystal growth of the rare-earth Sc-borate was carried out by pulling from the melt-soultion of La1+xSc3-x(BO3)4. The optimal conditions for the growth of LaSc3(BO3)4 were determined by traditional CZ method : pulling speed 0.7mm/hr, rotation speed 7-10 rpm under reduction condition. Pt and Ir crucibles could be used for about 8-10 times of growth. The effect of thermal configurations on the temperature distribution was investigated. A special two-coordinate manipulator was made for the precise movement of thermocouples from the melt to the top of the furnace for several thermal configurations. The radial gradient on the melt surface depends strongly on the construction of the afterheater. On the other hand, the axial gradient was mainly propotional to both the opening degree of baffle plate and the mutual positions of crucible and heater.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.948-955
• /
• 2019

As interests in 360-degree VR (Virtual Reality) video services enormously grow, compression and streaming technologies for VR video data have been rapidly developed. Quality Emphasized Region (QER) based streaming scheme has been developed as a kind of viewport-adaptive 360-degree video streaming technology for maintaining immersive experience and reducing bandwidth waste. For selecting a QER corresponding to the user's gaze coordinate, QER-based streaming scheme requires the calculation of Quality Emphasis Center (QEC) distance and signaling message delivery for requesting QER switching. QEC distance calculations require high computational complexity because of repeated calculations as many times as the number of QERs. Furthermore, the signaling message interval results in a trade-off relationship between efficient bandwidth usage and flexible QER switching. In this paper, we propose an improved QER selection algorithm based on MMT protocol to solve this problem. The proposed algorithm could achieve computational complexity reduction by using preprocessed QER_ID_MAP. Also, flexible QER switching could be achieved, as well as efficient bandwidth utilization by an adaptive adjustment of the signaling interval.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.173-183
• /
• 2020

In the midst of the aging of underground facilities in urban areas and anxiety about road excavation safety accidents, the Ministry of Land, Infrastructure and Transport began to build Underground Geospatial Infomation Map from 2015 as part of the 「ground subsidence prevention measures」 and efficient use of underground spaces. So, the scope is spreading every year. The current Underground Geospatial Infomation Map information is web-based and is operated in a desktop environment, so it is true that there are some limitations in its use in a field environment such as an excavation construction site. The Underground Geospatial Infomation Map, built and operated in a web-based environment, is a large-scale 3D data. Therefore, in order to service by transmitting data to the field without delay, it is necessary to lighten the Underground Geospatial Infomation Map data. In addition, the current Underground Geospatial Infomation Map is not unified in data formats such as 3DS and COLLADA, and the coordinate system method is also different in relative coordinates and absolute coordinates. In this study, by analyzing domestic and overseas prior research and technical use cases, a mobile Underground Geospatial Infomation Map data format and a lightweight method were presented, and a technology development was conducted to create a mobile underground space integration map in the presented format. In addition, the weight reduction rate was tested by applying 3D data compression technology so that data can be transmitted quickly in the field, and technology was developed that can be used by decompressing 3D data compressed in the field. finally, it aims to supplement the technology experimentally developed in this study and conduct additional research to produce it as software that can be used in the excavation site and use it.