• Investigative Magnetic Resonance Imaging
• /
• 제13권1호
• /
• pp.31-39
• /
• 2009

Purpose : This study proposes the keyhole method in order to improve the time resolution of the proton resonance frequency(PRF) MR temperature monitoring technique. The values of Root Mean Square (RMS) error of measured temperature value and Signal-to-Noise Ratio(SNR) obtained from the keyhole and full phase encoded temperature images were compared. Materials and Methods : The PRF method combined with GRE sequence was used to get MR temperature images using a clinical 1.5T MR scanner. It was conducted on the tissue-mimic 2% agarose gel phantom and swine's hock tissue. A MR compatible coaxial slot antenna driven by microwave power generator at 2.45GHz was used to heat the object in the magnetic bore for 5 minutes followed by a sequential acquisition of MR raw data during 10 minutes of cooling period. The acquired raw data were transferred to PC after then the keyhole images were reconstructed by taking the central part of K-space data with 128, 64, 32 and 16 phase encoding lines while the remaining peripheral parts were taken from the 1st reference raw data. The RMS errors were compared with the 256 full encoded self-reference temperature image while the SNR values were compared with the zero filling images. Results : As phase encoding number at the center part on the keyhole temperature images decreased to 128, 64, 32 and 16, the RMS errors of the measured temperature increased to 0.538, 0.712, 0.768 and 0.845$^{\circ}C$, meanwhile SNR values were maintained as the phase encoding number of keyhole part is reduced. Conclusion : This study shows that the keyhole technique is successfully applied to temperature monitoring procedure to increases the temporal resolution by standardizing the matrix size, thus maintained the SNR values. In future, it is expected to implement the MR real time thermal imaging using keyhole method which is able to reduce the scan time with minimal thermal variations.

• Journal of Mushroom
• /
• 제3권4호
• /
• pp.140-144
• /
• 2005

This study was conducted to verify the cause of suppression symptom in mycelial growth during summer and to be able to establish a countermeasure. Cultivation of Flammulina velutipes was experimented with varying elapsed time of 0, 3, 6, 9 hours after mixing the sawdust media and two kinds of water temperature (normal water, $24^{\circ}C$ and cold water, $6^{\circ}C$) for mixing sawdust media. There were trends of increased media temperature from $24^{\circ}C$ to $31^{\circ}C$ and decreased pH from 6.5 to 5.2~5.6 with varying elapsed time from mixing the media to sterilization. Bacterial density also increased with bacterial density in Medium $24^{\circ}C$ being 1.9~4.1 times higher than that in Medium 6. Growth of F. velutipes was delayed with dual culture of bacteria isolated from sawdust media. Total nitrogen content of sawdust media was lowered by elapsed time from mixing the media to sterilization. The use of normal water($24^{\circ}C$) delayed mushroom growth by 1~2 days compared with that of cold water($6^{\circ}C$). Furthermore, mycelial growth of F. velutipes in the bottle cultivation ceased 9 hours after mixing the media. Primordia formation of F. velutipes was delayed by 1~3 days by elapsed time after mixing sawdust media, while fruit-body yield decreased by 7~12% 6 hours after mixing the media. Fruit-body yield was more stabilized with the use of cold water($6^{\circ}C$) than with that of normal water($24^{\circ}C$). Results showed that it is effective to use cold water as low as $6^{\circ}C$ in mixing media for F. velutipes cultivation, especially during summer when environmental temperature is high, high pressure sterilization after bottling work can prevent bacterial propagation in the media and can stabilize media ingredient.

• Korean Chemical Engineering Research
• /
• 제54권1호
• /
• pp.11-15
• /
• 2016

Proton Exchange Membrane Fuel Cells (PEMFC) instead of batteries is appropriate for long time flight of unmanned aero vehicles (UAV). In this work, $NaBH_4$ hydrolysis system supplying hydrogen to PEMFC was studied. In order to decrease weight of $NaBH_4$ hydrolysis system, enhancement of hydrogen yield, recovery of condensing water and maintenance of stable hydrogen yield were studied. The hydrogen yield of 3.4% was increased by controlling of hydrogen pressure in hydrolysis reactor. Condensing water formed during air cooling of hydrogen was recovered into storage tank of $NaBH_4$ solution. In this process the condensing water dissolved $NaBH_4$ powder and then addition of $NaBH_4$ solution decreased system weight of 14%. $NaBH_4$ hydrolysis system was stably operated with hydrogen yield of 96% by 2.0g Co-P-B catalyst for 10 hours at 2.0L/min hydrogen evolution rate.

• Journal of Embryo Transfer
• /
• 제29권1호
• /
• pp.13-19
• /
• 2014

This study was carried out to study the survival rate of thawed Hanwoo embryos frozen by the slow-rate freezing or the cryotop vitrification method. Hanwoo cumulus-oocyte complexes were recovered from ovaries at a slaughter house, matured for 20~22 hours, fertilized with Hanwoo semen for 5~6 hours, and cultured for 7~9 days in $38.5^{\circ}C$, 5% $CO_2$ incubator. For freezing, Day 7~9 blastocysts were collected. Embryos for the slow-rate freezing were equilibrated in 1.8 M ethylene glycol (EG) with Dulbecco's phosphate-buffered saline (D-PBS). Programmable cell freezer was precooled down to $-7^{\circ}C$, and the straw was seeded during 8 minutes-holding time, and was cooled to $-35^{\circ}C$ at the cooling rate of $0.3^{\circ}C/min$, and then was plunged and stored in liquid nitrogen. Embryos for the cryotop vitrification were treated in TCM199 with 0.5 M sucrose, 16% EG, 16% dimethylsulfoxide (DMSO). Embryos were then loaded individually onto cryotop and plunged directly into liquid nitrogen. The survival rates of embryos frozen by these two freezing methods were evaluated at 12 to 24h post-thawing. The survival rates of frozen/thawed Hanwoo embryos by the cryotop vitrification method ($56.86{\pm}26.53%$) were slightly higher than those by the slow-rate freezing method ($55.07{\pm}26.43%$) with no significant difference. Using the cryotop vitrification and the slow-rate freezing of Hanwoo blastocysts on Day 7 following in-vitro fertilization (IVF) treatment, the survival rates of frozen/thawed Hanwoo embryos were $72.65{\pm}18.3%$ and $79.06{\pm}17.8%$, respectively. The survival rates by the cryotop vitrification were higher than those by the slow-rate freezing on both Day 8 and 9 with significantly higher survival rate on Day 9 (p<0.05). Using the cryotop vitrification and the slow-rate freezing of Hanwoo embryos to compare between three different blastocyst stages, the survival rates of the blastocyst stage embryos were $66.22{\pm}18.8%$ and $45.76{\pm}12.8%$, respectively with higher survival rate by the vitrification method (p<0.05). And the survival rate of expanded blastocysts was higher than those of early blastocysts and blastocysts in two freezing methods with significantly higher survival rate by the slow-rate freezing method (p<0.05).

• Journal of the Korean earth science society
• /
• 제32권7호
• /
• pp.860-870
• /
• 2011

This study is to explore the Pedagogical Content Knowledge of beginning earth science teachers about the porphyritic texture of igneous rocks, and to suggest the teaching device that can prevent a trial and error of students in earth science instruction. We developed an interview guideline concerned with basic perception on the porphyritic texture, formation condition and formation process of porphyritic rocks, teaching and learning on porphyritic rocks for it. And data was collected from 5 beginning earth science teachers (3 high schools, 2 middle schools) through a group discussion method. In result, despite the porphyritic texture can be found at hypabyssal rocks as well as volcano rocks and plutonic rocks, most beginning earth science teachers cognized that it could be found at hypabyssal rocks only by focusing the formation depth of hypabyssal rocks. Also, the formation of porphyritic texture should be considered the factors such as cooling rate, nucleation density, growth rate, growth time, etc. However they mainly reflected the formation temperature and growth rate as it's parameter. Participants have wrongly perceived that a phenocryst necessarily differs from a groundmass on chemical composition. And they are inclined to discriminate phenocryst from groundmass through their chemical differences, instead of grain size.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제40권3호
• /
• pp.172-180
• /
• 2003

The purpose of this study is to observe the heat transfer process in in-vivo human muscle based on Proton Resonance Frequency(PRF) method in Magnetic Resonance Imaging(MRI). MRI was obtained to measure the temperature variation according to the heat transfer in phantom and in-vivo human calf muscle. A phantom(2% agarose gel) was used in this experiment. MR temperature measurement was compared with the direct temperature measurement using a T-type thermocouple. After heating agarose gel to more than 5$0^{\circ}C$ in boiling hot water, raw data were acquired every 3 minutes during one hour cooling period for a phantom case. For human study heat was forced to deliver into volunteer's calf muscle using hot pack. Reference data were once acquired before a hot pack emits heat and raw data were acquired every 2 minutes during 30minutes. Acquired raw data were reconstructed to phase-difference images with reference image to observe the temperature change. Phase-difference of the phantom was linearly proportional to the temperature change in the range of 34.2$^{\circ}C$ and 50.2$^{\circ}C$. Temperature resolution was 0.0457 radian /$^{\circ}C$(0.0038 ppm/$^{\circ}C$) in phantom case. In vivo-case, mean phase-difference in near region from the hot pack is smaller than that in far region. Different temperature distribution was observed in proportion to a distance from heat source.

• Korean Business Review
• /
• 제23권1호
• /
• pp.87-106
• /
• 2010

North Korea is hoping get more international aids and cooperations with facing serious difficulties in the domestic economies, but it is expected to be hard to induce foreign direct investments due to the lots of existing negative factors in the credibility, profitability, bad images, and so on. On the other hand, in South Korea, the demands of the places and facilities for the leisure & tourism have been skyrocketed with the fast economic growth during the last three decades, especially in marine tourism As the Korea peninsula is surrounded with sea in three sides, North and South Korea must utilize these area qualitatively and quantitatively for advance of entire cooperation. The cooperation through sea has some restraint factors. They may occur unexpected conflict and need enormous infrastructure investment for the further cooperation. In the other side, it has some advantages such as, it can avoid direct contact between both people for North government. Even though inter-Korean relationship is facing temporary cooling time recently, The marine tourism co-development of the South-North Korea is a potential and important factor for enhancement of the reconciliation and cooperation. Furthermore, it can achieve unification of two Koreas. This study reviews many factors and suggests marine policy Support devices for The marine tourism co-development between South-North Korea.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제40권12호
• /
• pp.815-824
• /
• 2016

The fuel assembly for pressurized water reactor (PWR) consists of fuel rod bundle, spacer grid and bottom/top end fittings. The cooling water in high pressure and temperature is introduced in lower plenum of reactor core and directed to upper plenum through the subchannel which is formed between the fuel rods. The main thermal-hydraulic performance parameters for the PWR fuel are pressure drop and critical heat flux in normal operating condition, and quenching time in accident condition. The Korea Atomic Energy Research Institute (KAERI) has been developing an advanced PWR fuel, dual-cooled annular fuel and accident tolerant fuel for the enhancement of fuel performance and the localization. For the key thermal-hydraulic technology development of PWR fuel, the KAERI LWR fuel team has conducted the experiments for pressure drop, turbulent flow mixing and heat transfer, critical heat flux(CHF) and quenching. The computational fluid dynamics (CFD) analysis was also performed to predict flow and heat transfer in fuel assembly including the spent fuel assembly in dry cask for interim repository. In addition, the research cooperation with university and nuclear fuel company was also carried out to develop a basic thermal-hydraulic technology and the commercialization.

• Korean Chemical Engineering Research
• /
• 제49권5호
• /
• pp.644-651
• /
• 2011

Storing hydrogen in solid state hydride is one of the best promising methods for the future hydrogen economy. The total performance of such systems depends on the rate at which the amount of mass and heat migration is supplied to solid hydride. Therefore, an accurate modeling of the heat and mass transfer is of prime importance in optimizing the design of such systems. In this work, Hydrogen storage in Pt-CNTs hydrogen reactor has been intensively investigated by solving 2 dimensional mathematical models. Using a CFD computer software, systematic studies have been performed to elucidate the effect of heat and mass transfer during hydrogen charging periods. It was revealed that the optimized design of hydrogen storage vessel can prevent the increase of system temperature and the charging time due to the convective cooling effects inside the vessels at even high charging pressure. Because none has reported the critical issues of heat and mass transfer for CNT based hydrogen storage system, this work can support the first insight of the optimal design for solid state hydrogen storage system based on CNT in the near future.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제13권3호
• /
• pp.201-209
• /
• 2015

Currently, 23 nuclear power plants are in operation at Kori, Uljin, Younggwang and Wolsong site and a reference deep geological disposal system has been developed for the spent fuels generated by them. The reference spent fuel for this disposal system has 4.5wt% of initial enrichment, 55 GWd/MtU of burn-up, and 40 years of cooling time. In this paper, to improve disposal efficiency and economic feasibility, the characteristics of spent fuels from nuclear power plants, such as type and burn-up, were reviewed. A disposal canister concept for shorter length and relatively lower burn-up spent fuels than the reference spent fuels was developed. Based on this canister concept, thermal analyses were carried out and a deep geological disposal concept was proposed. Measures of disposal efficiency such as unit disposal area and disposal density were compared between this disposal system and the reference disposal system. Also, economic feasibility, such as the volume reduction of copper, cast iron, and bentonite, was analyzed and the results of these analyses showed that the disposal system proposed in this paper has an efficiency of at least 20%. These results could be used for establishing spent fuel management policy and designing practical disposal systems for spent fuels.