• Resources Recycling
• /
• v.30 no.1
• /
• pp.83-91
• /
• 2021

Ladle furnace slag is a byproduct of the steel-making process, and it contains the mineral β-C2Sandtherapid-settingmineral (dependingonwhichreducingagenthasbeenused). Ladle furnace slag is often treated through slow cooling, which causes the slag to lose its reactivity. In this study, the properties of air-quenched CAC and pulverized ladle furnace slag containing gypsum were evaluated, and the optimal mixing ratio was determined for broadening their usage. Consequently, the properties of CAC aredemonstrated by the dissolution of gypsum after a period of three hours and the content of gypsum after a period of one day. The optimal mixing ratio of anhydrate and hemihydrate gypsum is found to be within 30% and that of dihydrate gypsum is found to be higher than 35%. Furthermore, based on the results of CAC with dihydrate gypsum, the applicability of the by-product dihydrate gypsum has been verified.

• Journal of the korean society of oceanography
• /
• v.34 no.1
• /
• pp.43-48
• /
• 1999

The latest-Quaternary paleoceanographic history of the Ulleung Basin, the East Sea (the Sea of Japan) is reconstructed on the base of planktonic foraminifera, oxygen and carbon isotopes, and accelerator mass spectrometer radiocarbon (AMS-$^{14}$C) data from two cores. Sinistral populations of Neogloboquadrina pachyderma are dominant during the last glacial period while dextral forms of Neogloboquadrina pachydeyma are abundant in the Holocene. An abrupt increase in ${\delta}^{18}$O values in both cores that began about 11 ka B.P may indicate the Younger Dryas cooling episode. A low-salinity event, marked by light ${\delta}^{18}$O values (0-1 %), is observed before the Younger Dryas event. As previous works suggested, the low-salinity event is probably due to the freshening of surface water caused by fresh water input from Huang Ho river and/or the excess of precipitation over evaporation. The lowest salinity water in the Ulleung Basin was probably continued from approximately 18 ka B.P. to 15 ka B.P. The ${\delta}^{18}$O values have gradually decreased since the Younger Dryas as a result of the continuous inflow of the warm Tsushima Current into the East Sea.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.9
• /
• pp.482-495
• /
• 2017

Degree-days are practically used as a tool to estimate energy consumption for heating and cooling. Degree-days are calculated by summing differences of balance point temperature and outside temperature for the analyzed period. Determining balance point temperature is a key point in calculating accurate degree-days. However, ASHRAE standards are used for balance point temperature in Korea because balance point temperature considering climate conditions and building thermal performance is not proposed in Korea. This study proposes the process to generate balance point temperature for heating degree-days considering Korean climate and building conditions. Also, a new balance point temperature for three regions in Korea will be suggested in this study. Balance point temperature of Seoul is approximately $15.0^{\circ}C$, lower than the current standard of $18.3^{\circ}C$. Balance point temperature of Seoul considering climate conditions and building performance can be different from the ASHRAE suggested value ($18.3^{\circ}C$). Results revealed the current standard for balance point temperature should be changed considering climate and building conditions in Korea.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.821-827
• /
• 2001

As one of the advanced design features of the Korea next generation reactor, direct vessel injection (DVI) system is being considered instead of conventional cold leg injection (CLl) system. It is known that the DVI system greatly enhances the reliability of the emergency core cooling (ECC) system. However, there is still a dispute on its performance in terms of water delivery to the reactor core during the reflood period of a large-break loss-of-coolant accident (LOCA). Thus, experimental validation is under progress. In this paper, a new scaling method, using time and velocity reduced linear scaling law, is suggested for the design of a scaled-down experimental facility to investigate the direct ECC bypass phenomena in PWR downcomer.

• Journal of Animal Environmental Science
• /
• v.4 no.1
• /
• pp.1-8
• /
• 1998

The objective of this study was conducted to develope a mobile pig nursery(MPN) for segregation of early weaned piglet. The units of MPN was consisted of 4 rectangle-type pens, 1 workroom, 2 doors, 3 windows, 1 air-inlet, 1 exhaust fan, and 1 cooling and heating system. Total of 40 piglet were weaned at 7 days of age. The period of the feeding test was 63 days. The results obtained are as follows: 1. The insulation thickness was 70, 70 and 50 mm of roof, floor and wall, respectively. R-value was 15.32 and 10.32 of roof and wall, respectively. 2. Exhaust fan( 30.48) was installed near back door 40cm from the bottom. When exhaust fan speeds were 15, 20, 30 and 35%, Air ventilation was required 9.75, 7.07, 1.72, 1.45 minutes of respectively. 3. Average temperature in the MPN was able to maintain 27∼28$^{\circ}C$ from 7∼28 days of age, 24∼25$^{\circ}C$ from 35∼56 days of age and 20∼21.5$^{\circ}C$ from 56∼70 days of age. 4. Average daily gain, feed intake and feed conversion were 420.6g, 761.5g, 1.81 respectively.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.3
• /
• pp.57-61
• /
• 2003

In this investigation, the 6.6kV/200A Inductive Superconducting Fault Current Limiter (SFCL) was designed and fabricated. The type of DC reactor for Inductive SFCL was determined as solenoid type during the period of $1${st}$ year research. The 5 bobbins for DC reactor were fabricated and each bobbin was wound with 4 stacked High-Tc superconducting (HTS) tapes and the 5 bobbins were connected in series. The critical current and inductance of DC reactor were simulated by Finite Element method (FEM) and compared with the measured results. The characteristics of DC reactor were enhanced in sub-cooled nitrogen system rather than in liquid nitrogen system. The procedures to accomplish the sub-cooled nitrogen system and the experimental results were introduced in detail. Moreover, the design of sub-cooled nitrogen cryogenic system for next year research was introduced in brief.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.181-185
• /
• 1996

A considerable amounts of mannitol were accumulated during the fermentation of Kimchis. When several oligosaccharide including fructo-, soybean-, and isomaltooligosaccharides were added during the preparation of Kimchi as beneficial ingredient respectively, fructooligosaccharides (at $25^{\circ}C$) and soybean-oligosaccharides (at $35^{\circ}C$) significantly increased the amounts of mannitol accumulation, while isomalto-oligosaccharides exerted no effect at all fermentation conditions examined. This result were caused by no appearance of microorganisms which have the capability of utilizing isomalto-oligosacsharides during fermentation period. Isomalto-oligosaccharides can be recommended as an effective ingredient of Kimchis because both oligosaccharides and mannitol that have favorable functionalities were simultaneously contained. However, so as to enhance the cooling taste of Kimchis by increasing the content of mannitol, fructo- and soybean-oligosaccharides are rather favorable.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.2
• /
• pp.285-293
• /
• 1997

Numerical calculations has been performed for the flow and heat transfer to a circular cylinder from a hot circular impinging air jet. The characteristics of the flow and heat transfer are investigated and compared with the two-dimensional flow. The present study lays emphasis on the investigation on the flow and heat transfer of the three-dimensionality. The effects of the buoyancy force and the size of jet are also studied. The noticeable difference between the three and the two-dimensional cases is that there is axial flow of low temperature into the center-plane of the cylinder from the outside in the recirculation region. Local Nusselt number over the cylinder surface has higher value for the large jet as compared with that of the small jet since the energy loss of hot jet to the ambient air decreases with increase of the jet size. As buoyancy force increases the flow accelerates so that the period of cooling by the ambient air is reduced, which results in higher local Nusselt number over the surface.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.634-637
• /
• 2008

Ground source heat pumps are clean, energy-efficient and environment-friendly systems cooling and heating. Although the initial cost of ground source heat pump system is higher than that of air source heat pump, it is now widely accepted as an economical system since the installation cost can be returned within an short period of time due to its high efficiency. In the present study, performances of ground source compound hybrid heat pump system applied to a large community building are simulated. The system design and operation process appropriate for the surrounding circumstance guarantee the high benefit of the heat pump system applied to a large community building. If among several renewable energy sources, ground, river, sea, waste water source are chosen as available alternative energies are combined, COP of the system can be increased largely and hybrid heat pump system can reduced the fuel cost.

• Journal of Chest Surgery
• /
• v.22 no.4
• /
• pp.609-619
• /
• 1989

During aortic valve surgery, cardioplegic solution is delivered through direct cannulation of both coronary ostia. Since this approach may cause an intimal injury leading to acute dissection or late ostial stenosis, this study was undertaken to evaluate myocardial protective effect of retrograde perfusion of cardioplegia [RCSP <% RRAP] in 18 clinical cases, which were compared with antegrade perfusion of cardioplegia in 27 clinical cases. This study were investigated 1] cease and return of electromechanical activity after cardioplegia infusion 2] the myocardial temperature during operation 3] the aortic cross clamping time and total bypass time 4] frequency of DC shock for defibrillation 5] need for inotropic drugs after operation 6] electrocardiographic evidence of myocardial infarction or ventricular arrhythmia after operation 7] the enzymes activity during preoperative and postoperative period as an evaluation of myocardial ischemic injury and 8] operative mortality rate The combination of retrograde cardioplegia and topical cooling with ice slush yielded promptly hypothermia of myocardium and shorter aortic cross-clamping time compared with antegrade cardioplegia [P < 0.05]. The temperature of the interventricular septum was maintained below 20oC by continuous perfusion or intermittent perfusion of cold blood cardioplegia and other results were no statistically significant difference between the two methods [P >0.05]. This technique provides clear operative field and avoids some serious complications which are caused by coronary ostial cannulation. These results suggested that the retrograde perfusion of cardioplegia is a simple, safe, and effective means of myocardial protection during open heart surgery.