• 한국물환경학회지
• /
• 제26권4호
• /
• pp.664-672
• /
• 2010

This study was performed to evaluate the feasibility of industrial by-products such as converter slag, olivine, red mud and fly ash as a seed crystal of struvite crystallization for the removal of highly concentrated $NH_4-N$ and $PO_4-P$. In the kinetic experiments, more than 90% of $NH_4-N$ and $PO_4-P$ was eliminated by struvite crystallization within 30 minutes of reaction time. The pH range in meta-stable region of struvite crystallization was found to be pH 7.0~9.0 under the Mg:N:P=1:1:1 equi-molar condition with 100 mg/L of $NH_4-N$. Total removal efficiencies of $NH_4-N$ and $PO_4-P$ by both struvite precipitation and crystallization were increased with the increase of pH. Removal efficiencies of $NH_4-N$ and $PO_4-P$ were significantly enhanced by struvite crystallization using industrial by-products as a seed crystal compared with those by struvite precipitation without seed crystal. Red mud, converter slag, olivine and fly ash enhanced the removal efficiencies of $NH_4-N$ by 40.9%, 37.7%, 28.4% and 16.4%, respectively. Removal efficiencies of $PO_4-P$ for converter slag, red mud, fly ash, olivine were increased by 3.7 times, 2.6 times, 72.4% and 68.0%, respectively. Converter slag and red mud showed higher feasibility as a seed crystal than others for the removal of highly concentrated $NH_4-N$ and $PO_4-P$. In particular, converter slag might have a high capacity of phosphorus removal.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.613-618
• /
• 2002

Steel slag produced in steel making process is divided with electric arc furnace slag and converter slag. Compared with the blast furnace slag, converter slag has the expansibility due to the reaction with water and free CaO. Therefore it is specified in Standard Specification for Concrete in Korea that steel slag aggregate must not be used in concrete. In this study, we treat electric arc furnace slag aggregate(EAFSA) for concrete before and after several aging process to reduce expansibility. The fundamental properties are measured, which are specific gravity, unit weight, abrasion value and immersion expansion ratio, as concrete aggregate. To understand the suitability of EAFSA for concrete, we made the concrete with EAFSA and then determined the strength and the volume change in EAFSA concrete. From the results EAFSA treated with steam aging process has potentiality for concrete aggregate.

• 한국세라믹학회지
• /
• 제17권4호
• /
• pp.217-221
• /
• 1980

Hydration of granulated blastfurnace slag-gypsum-$C_4A_3\bar{S}$ clinker/modified converter slag clinker was investigated to develop the cement of slag-gypsum system. In the hydration of granulated slag-gypsum-$C_4A_3\bar{S}$ system clinker, the hydrates such as ettringite, CSH gel and $AH_3$ gel were formed, and the strength of hardened body would be increased by forming compact microstructure. The modified converter slag clinker which contains alite and calcium aluminate was synthesized, and the hydration reactivity of the cement from this clinker, gypsum and granulated slag is similar to usual portland cement, and the hydrates were mainly CSH, ettringite, and $Ca(OH)_2$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.92-95
• /
• 2002

A study on the system automation for the nitrogen splash slag coating in Basic Oxygen Blowing Furnace (BOF) is described. The engineers are trying to do their best efforts to increase the life of converter lining by developing improved refractory material and optimal operation techniques in the steel plants, A new slag coating method is needed to reduce the erosion rates of the refractory. In the current slag costing method, the BOF was swung back and forth. The new method uses the oxygen lance to blow the residual slag to the walls and cone of the converter. The nitrogen gas is used for blowing. This method is developed based on the automation process at factory in POSCO dated on the May 1998. The test results of nitrogen splash slag coating system for the BOF at POSCO are show to show the effectiveness of the system.

• 한국산학기술학회논문지
• /
• 제8권1호
• /
• pp.136-142
• /
• 2007

최근 부영양화를 야기시키는 물질인 $PO_4^{3-}$ 이온을 제거하기 위해 고형반응물을 이용하는 것이 주목을 받고있다. 철광석의 정련 과정에서 생기는 슬래그는 용해된 무기 인산염을 폐수로부터 유리시켜 흡착 제거하는 것에 대한 근본적인 연구가 이루어져 왔다. 본 연구는 물 속의 인산염을 제거하기 위해 전로슬래그를 이용하였을 때 오랜 시간동안 hydroxyapatite 형태로 변화시켜 제거하고 인산염 제거를 향상시키기 위한 가능성을 찾기 위하여 여러 가지 조건을 변화시켜서 수행하였다. 본 연구 결과 전로슬래그를 이용한 등온흡착식을 적용했을 때 Freundlich 식을 적용할 수 있었으며, 인을 제거하는데 사용된 전로 슬래그의 크기는 $2{\sim}0.425mm$가 가장 적당한 것으로 나타났다. 특히, 연속반응탑을 이용할 경우, 유입수 농도가 1 mg/L일 때 80%까지 제거되는 것으로 나타났다.

• International Journal of Concrete Structures and Materials
• /
• 제5권2호
• /
• pp.133-137
• /
• 2011

In this study, a physical and chemical properties analysis was conducted for PCSP to evaluate properties of its materials and, for comparison purpose, was also conducted for CSP. The result of experiment confirmed improvement of iron recovery rate due to introduction of rapid water-cooling equipment and greater density of exterior and interior structure through SEM observation and porosity measurement. Also, SEM, XRD and DSC-TGA analysis showed that content of f-CaO in PCSP was minuscule so it was decided that problems of material stability including f-CaO-caused bulging failure, which has been problematic, can be solved.

• 자원리싸이클링
• /
• 제8권1호
• /
• pp.44-51
• /
• 1999

전로슬랙에 폐주물사($SiO_2$원)와 탄소를 첨가하여 환원 . 용해함으로써얻은 개질슬랙의 기본적인 물성을 조사하였다. 염기도에 따라 철의 회수율이 크게 영향을 받음을 알 수 있었다. 염기도를 1.34로 조절하고 환원하여 철을 분리 회수한 후, 서냉하여 얻은 개질슬랙의 주요 물성치(비중, 흡수율, 경도 및 압축강도)들은 천연골재와 유사한 값을 보인다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.114-116
• /
• 2005

• 한국건설순환자원학회논문집
• /
• 제11권3호
• /
• pp.161-168
• /
• 2023

전로슬래그는 용광로에서 생산된 선철을 용융강으로 정제하는 과정에서 배출되는 부산물로, 컨버터에서 생산되는 양의 약 15 %가 배출된다. 이 전로슬래그는 유리 CaO 함량이 높아 콘크리트 골재로 사용 시 팽창균열 가능성이 있어 재활용이 어렵다. 이를 해결하기 위해 전로슬래그를 야드에서 숙성시키지만 완벽하게 제어하기는 어렵다. 본 연구에서는 전로슬래그에 모르타르 제제를 혼합하여 연구를 수행함으로써 골재가 아닌 시멘트 대체재로 전로슬래그를 사용할 수 있는 가능성을 검토하였다. 실험에 사용된 전로슬래그의 EDS 결과, 분말상 대비 골재상일 때 자력선별을 진행하는 것이 T.Fe를 제거하는데 더 효과적인 것을 확인하였다. 분쇄효율 실험은 T.Fe가 많이 분류된 비자착분이 가장 높은 분말도를 나타내었다. 이런 고분말도로 인해 전로슬래그를 15 % 치환했을 때 Plain 대비 비자착분의 플로가 가장 많이 감소하였다. 전로슬래그를 혼입한 모르타르의 길이변화는 재령이 증가할수록 변화율이 커지지만 Plain 대비 유사한 변화율이 나타났다. 압축강도에서는 Plain 대비 비자착분은 치환율 15 %까지 91.9~97.1 %의 강도 발현을 나타내었다. 추후 전로슬래그 미분말을 시멘트 대체재로 활용할 경우, 분쇄 전 자력(Gauss) 조절을 통한 최적의 자력선별 조건을 찾아 더 효율적인 T.Fe 선별 방법이 필요할 것으로 판단되며, EDS 및 Mapping은 국부적인 분석방법으로 큰 편차율을 보이기 때문에 다수의 시료 평가가 필요할 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 연약지반처리위원회 학술세미나
• /
• pp.93-112
• /
• 2000

The permeability of converter slag, replacing material of sand mat on improving soft clay foundation, was evaluated in the laboratory. The effects of grain size, flow water time and aging were investigated using sea and fresh water. Converter slag being submerged with fresh water, the coefficients of permeability in A and B samples less than 10mm grain sizes were measured as 6.52${\times}$10$\^$-2/cm/sec and 5.99${\times}$10$\^$-1/cm/sec, while changed as 1.88${\times}$10$\^$-2/cm/sec, 3.86${\times}$10$\^$-1/cm/sec under sea water condition. Also, the condition of turbulent flow may exit and was experimentally identified from the relationship between hydraulic gradient and seepage velocity. After 180 days on using sea water, the coefficients of permeability of sample A and B samples decreased ten times smaller than those initial values. And after that time continually decreased as for till 360 days. The reduction of permeability coefficient was considered to influence filled with voids in high-calcium quicklime(CaO). However, in-situ coefficient of permeability was practically satisfactory.