• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.5 s.335
• /
• pp.55-60
• /
• 2005

A V-band MIMIC quadruple subharmonic mixer is reported in this paper. The cascode harmonic generator is proposed for a high conversion gain. The proposed cascode harmonic generator is shown with a 4-th harmonic output characteristic that represents an average of 2.9 dB and a maximum of 4 dB higher than the conventional multiplier. The measured result of the subharmonic mixer has a conversion gain of 3_4 dB which a good conversion gain at a LO power of 13 dBm. Isolations of LO-to-IF and LO-to-RF were obtained -53.6 dB and -46.2 dB, respectively. The conversion gain of the subharmonic mixer in this study has a higher conversion gain compared with some other reports in millimeter-wave range.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.256-260
• /
• 2009

The optical performance of the reflective polarizer was investigated over three kinds of direct-lit backlights and/or different configurations of the optical sheets. The optical gain factor achieved by using the reflective polarizer increased as the diffuse nature of the optical sheet was enhanced, because of the more efficient polarization conversion. In addition, the gain factor decreased substantially in flat-lamp backlights compared to tubular-lamp backlights, which was ascribed to the high loss factor during the polarization recycling process due to the complex structure and large area of flat lamps. All these results suggested that reducing the loss factor of the backlight is very important for efficient polarization conversion and thus high optical gain of the reflective polarizer.

• Journal of electromagnetic engineering and science
• /
• v.11 no.3
• /
• pp.161-165
• /
• 2011

In this paper, a high-efficiency DC-AC converter is used for wireless energy transmission. The DC-AC convertter is implemented by combining the oscillator and power amplifier. Given that the conversion efficiency of a DC-AC converter is strongly affected by the efficiency of the power amplifier, a high-efficiency power amplifier is implemented using a class-E amplifier structure. Also, because of the low output power of the oscillator connected to the input stage of the power amplifier, a high-gain two-stage power amplifier using a drive amplifier is used to realize a high-output power DC-AC converter. The high-efficiency DC-AC converter is realized by connecting the oscillator to the input stage of the high-gain high-efficiency two-stage class-E power amplifier. The output power and the conversion efficiency of the DC-AC converter are 40.83 dBm and 87.32 %, respectively, at an operation frequency of 13.56 MHz.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.426-429
• /
• 1988

A simple design method of a single balanced MMIC mixer is described. It uses small signal S11 and capacitive load for the input matching circuit and the output loading circuit, respectively. It is found that the conversion gain of the FET mixer is independent of FET gate width. The fabricated mixer has 2.5 dB conversion gain at 9 GHz with 50 ohm IF load and 2 dBm local oscillator power.

• Journal of Veterinary Clinics
• /
• v.25 no.2
• /
• pp.67-72
• /
• 2008

The aim of this study was to investigate the efficacy of Lactobacillus spp. W44 and J124 strain isolated from Kimchi on the growth rate, average daily gain (ADG), feed conversion and change of intestine microflora in the weaning piglets. In the experiment 1, growth rate was significantly increased to $28.5\;{\pm}\;4.3\;kg$ and $27.6\;{\pm}\;3.3\;kg$ after oral administration of W44 and J124 strain as feed additives, respectively (p<0.05). ADG and feed conversion were also significantly improved after administration during 44 experiment days (p<0.05). In the analysis of intestinal microflora, the number of Lactobacillus spp. in the experiment groups was significantly increased 100 to 1,000 times compared to those of control group. In the experiment 2, the efficacy of W44 and J124 strains on the growth rate, ADG, feed conversion and change of intestine microflora were reconfirmed significantly (p<0.05). However, there were no significant differences on feed conversion in the W44 bead and J124 bead groups. In summary, our results suggest that W-44 and J-124 stains from Kimchi have a significant effect on the weight gain and feed conversion, and it may be useful probiotic strains for the weaning piglets as feed additives.

• Korean Journal of Organic Agriculture
• /
• v.12 no.1
• /
• pp.81-92
• /
• 2004

The effect of feeding extracts from rhus trees on performance of broiler were performed to investigate development of natural antibiotic in process of broilers production. A total of 320 broiler chicks at 7 day of age were fed the commercial diet and water, water containing 0 ppm (control), 300 ppm (T1), 600 ppm (T2) and 1000 ppm (T3) of extracts from rims trees for 7 weeks. The body weight gain and feed conversion ratio were improvement by feeding extracts from rims trees at 7 to 21 days of age (P<0.05), but amount of feed intake and mortality were not different among the four group. When 21 to 35 days of age, body weight gain, amount of feed intake, feed conversion ratio and mortality were almost same results when 7 to 21days of age, but it was not significantly different. When 35 to 49 days of age, body weight gain in T1 and T3 group was significantly improvement than control group (P<0.05), also feed conversion ratio was improve by feeding extracts from rhus trees. There was a decrease in the microflora population of both E coli. and salmonella in the cecum contents and feaces in broilers by feeding extracts from rhus trees. Emission of ammonia and VFA gas from excreta were significantly decreased at 5 to 10 days of storaged period (P<0.05). The digestibility of dry matter, crude fat, and crude ash of feed were tend to increased in broiler feeding extracts from rims trees. Digestibility of crude protein of feed in broiler three treatmental groups was significantly improved (P<0.05) as compared with those in control group. These results indicated that the feeding extracts from rhus trees of 300 to 1000 ppm of broiler production were improvement in th6 body weight gain, feed conversion ratio, and mortality due to increasing nutrients digestibility from feed, decreasing of microflora population of both E coll. and salmonella in the cecum contents and feaces, decreasing emission of ammonia and VFA gas from excreta.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.2
• /
• pp.89-95
• /
• 2003

In this paper, we have designed and fabricated high conversion gain Q-band active sub-harmonic mixers for a receiver of millimeter wave wireless communication systems. The fabricated active sub-harmonic mixer uses 2nd harmonic signals of a low local oscillator (LO) frequency. The fabricated mixer was successfully integrated by using $0.1{\;}\mu\textrm{m}$GaAs pseudomorphic high electron mobility transistors (PHEMTs) and coplanar waveguide (CPW) structures. From the measurement, it shows that maximum conversion gain of 4.8 dB has obtained at a RF frequency of 40 GHz for 10 dBm LO power of 17.5 GHz. Conversion gain from the fabricated sub-harmonic mixer is one of the best reported thus far. And a phase noise of the 2nd harmonic was obtained -90.23 dBc/Hz at 100 kHz offset. The active sub-harmonic mixer also ensure a high degree of isolations, which are -35.8 dB from LO-to-IF and -40.5 dB from LO-to-RF, respectively, at a LO frequency of 17.5 GHz.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.1
• /
• pp.30-40
• /
• 2002

A 2.45GHz double-balanced modified Gilbert-type CMOS up-conversion mixer design is introduced, where the PMOS current-reuse bleeding technique is demonstrated to be efficient in improving conversion gain, linearity, and noise performance. An LO buffer is included in the mixer design to perform single-ended to differential conversion of the LO signal on chip. Simulation results of the design based on careful modeling of all active and passive components are examined to explain in detail about the characteristic improvement and degradation provided by the proposed design. Two kinds of chips were fabricated using a standard $0.35\mu\textrm$ CMOS process, one of which is the mixer chip without the LO buffer and the other is the one with it. The measured characteristics of the fabricated chips are quite excellent in terms of conversion gain, linearity, and noise, and they are in close match to the simulation results, which demonstrates the adequacy of the modeling approach based on the macro models for all the active and passive devices used in the design. Above all the benefits provided by the current-reuse bleeding technique, the improvement in noise performance seems most valuable.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.764-768
• /
• 2002

In this paper, a double balanced gilbert cell MMIC mixer was realized in Tachyonics SiGe HBT technology. The fabricated mixer has 17 dB conversion gain, 9.8 dB noise figure, -4.2 dBm output 1 dB compression point, -27 dBc RF to IF isolation, and the good input, output matching characteristics. It draws 10 mA from a 3 V supply. The simulation and the measured results are closer to each other, which confirms accuracy of the model library and reliability of the process.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.49-57
• /
• 2007

Recently, CMOS RF integration has been widely explored in the wireless communication area to save cost, power, and chip area. The direct conversion architecture, rather than a more conventional super-het-erodyne, has been an attractive choice for single-chip integration because of its many advantages. However, the direct conversion architecture has several fundamental problems to solve in achieving performance comparable to a super-heterodyne counterpart. In this paper, we describe a programmable filter for mobile communication terminals using a direct conversion architecture. The proposed filter can be implemented with the active-RC filter and programmed to meet the requirements of different communication standards, including GSM, DECT and WCDMA. The filter can be tuned to select a detail frequency by changing the gate voltage of the MOS resistors. The gain of the proposed architecture can be programmed from 27dB to 72dB using the filter gain and VGA in 3dB steps.