• 제목/요약/키워드: conventional water treatment

검색결과 567건 처리시간 0.033초

Conventional composite resin과 사뭇 다른 flexible composite resin의 여러 임상 활용 예 (Examples of clinical applications of flexible composite resin that is quite different from conventional composite resins)

  • 김우현
    • 대한심미치과학회지
    • /
    • 제29권2호
    • /
    • pp.92-102
    • /
    • 2020
  • Bond-Fill SB는 분말 / 액체로 만들어져 있으며, 브러시의 액량을 조절하여 유동성을 조절할 수 있습니다. TBB라고하는 강력한 촉매 덕분에 물과 산소가있는 상태에서도 중합이 가능하다는 장점이 있습니다. 또한 4-META를 함유하고있어 적절한 표면 처리로 금속 및 세라믹에 접착 할 수있는 장점이 있습니다. 이러한 장점을 충분히 이해하시면 기존의 복합 레진으로 처리하기 어려운 경우에 적극 활용할 수 있습니다.

Stage by stage design for primary, conventional activated sludge, SBR and MBBR units for residential wastewater treatment and reusing

  • Aziz, Shuokr Qarani;Omar, Imad Ali;Bashir, Mohammed J.K.;Mojiri, Amin
    • Advances in environmental research
    • /
    • 제9권4호
    • /
    • pp.233-249
    • /
    • 2020
  • To date, there is no central wastewater (WW) treatment plant in Erbil city, Kurdistan region, Iraq. Therefore, raw WW disposes to the environment and sometimes it used directly for irrigation in some areas of Erbil city. Disposal of the untreated WW to the natural environment and using for irrigation it causes problems for the people and the environment. The aims of the current work were to study the characteristics, design of primary and different secondary treatment units and reusing of produced WW. Raw WW samples from Ashty city-Erbil city were collected and analyzed for twenty three quality parameters such as Total Suspended Solids (TSS), total dissolved solids, total volatile and non-volatile solids, total acidity, total alkalinity, total hardness, five-day Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), biodegradability ratio (BOD5/COD), turbidity, etc. Results revealed that some parameters such as BOD5 and TSS were exceeded the standards for disposal of WW. Design and calculations for primary and secondary treatment (biological treatment) processes were presented. Primary treatment units such as screening, grit chamber, and flow equalization tank were designed and detailed calculation were illustrated. While, Conventional Activated Sludge (CAS), Sequencing Batch Reactor (SBR) and Moving Bed Biofilm Reactors (MBBR) were applied for the biological treatment of WW. Results revealed that MBBR was the best and economic technique for the biological treatment of WW. Treated WW is suitable for reusing and there is no restriction on use for irrigation of green areas inside Ashty city campus.

Development and Performance Evaluation of Electrodewatering System for Sewage Sludge Recycling

  • Lee, Jae-Keun;Lee, Jung-Eun;Shin, Hee-Soo;Park, Chan-Jung;Lee, Chang-Gun;Kim, Young-Hwan;Kim, Man-Jong
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.443-447
    • /
    • 2001
  • A laboratory-scale electrodewatering system for enhancing conventional filter pressure dewatering by an electric field has been developed to decrease the water content of sludge generated in the wastewater treatment. It consists of a piston-typed filter press, a power supply and data acquisition system. The offset of electrodewatering is investigated as a function of applied pressure, applied voltage, sludge type and filtration time. Also the optimal conditions for maximizing the dewatering efficiency in the eletrodewatering system are investigated. Electric field strength and mechanical pressure are in the range of from 0 to 120 V/cm and from 98.1 to 392.4 kPa. The dewatering rates increased with increasing electric strength. These experiments produced a final sludge cake with water content of 60 wt% using electrodewatering technology, compared with a 80 wt% using pressure filtration alone. The conventional filtration system using the electrodewatering shows the potential to be effective method for improving dewatering Sludge.

  • PDF

수처리시설용 콘크리트의 금속용사 피막 종류에 따른 내오존성 및 전기화학적 방식 성능 평가 (Evaluation of Ozone Resistance and Anti-Corrosion Performance of Water Treatment Concrete according to Types of Metal Spray Coating)

  • 박진호;최현준;이한승;김상열;장현오
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제23권4호
    • /
    • pp.61-68
    • /
    • 2019
  • 산업화, 도시화로 인해 수자원의 오염이 악화 되면서 기존에 염소를 이용한 정수처리 방법으로는 깨끗한 물을 공급하는데 어려운 실정이다. 이에 오존을 이용한 고도정수 처리 시설의 도입이 증가하고 있다. 그러나 기존의 방수 방식 공법으로 사용되는 에폭시계 방수 방식제 및 스테인리스는 오존의 강력한 산화력으로 인해 열화되어 박리 등 문제 발생하였으며, 콘크리트까지 영향을 미쳐 내구성 저하의 원인이 된다. 이에 따라 본 연구에서는 내오존성 및 내화학성이 뛰어난 금속 패널을 기존의 시공법 보다 손쉬운 방법으로 시공하기 위한 방법으로 금속 용사 공법을 이용하여 수처리 시설 콘크리트 구조물의 열화를 원천적으로 방지하기 위한 마감공법 개발 연구의 일원으로 용사금속 종류 에 따른 내오존성 평가를 실시하였으며, 실제 하수처리장 환경에서의 전기화학적 안정성능 평가를 실시하였다. 실험결과 용사금속 Ti이 용사 후에도 내오존성이 뛰어난 것으로 나타났으며, 하수처리장 환경에서의 전기화학적 안정성능 평가 결과 용사금속 Ti가 $403.83k{\cdot}{\Omega}{\cdot}cm^2$의 가장 높은 분극저항을 나타남으로써 높은 수준의 내구성을 확보하는 것을 확인할 수 있었다.

수용성 키토산의 SD 랫드에 대한 4 주 반복 경구 투여 독성시험 (A 4-week Oral Toxicity Study of Water-soluble Chitosan in Sprague-Dawley Rats)

  • 장범수;임종환;윤효인
    • 대한수의학회지
    • /
    • 제43권2호
    • /
    • pp.195-202
    • /
    • 2003
  • Chitosan is known to have antibacterial, antitumorogenic, hypolipidemic and immunopotentiating activities, hence finding diverse uses as a component in varying functional foodstuffs. However, some investigators reported it caused mineral absoiption inhibition and excess coagulation. From the chemical viewpoint, conventional chitosans are high-molecule polymers lacking water solubility, which could be related with their possible toxicity. A newly developed low- molecule water soluble chitosan is thought to have low toxicity compared to conventional chitosans. But no investigation was carried out to evaluate its toxicity. In this study, a 28-day subacute oral toxicity study of the water-soluble chitosan was performed in Sprague-Dawley rats of both sexes. Each 36 male and female rats were orally administered with 500, 1,000 and 2,000 mg/kg/day for 28 consecutive days, respectively. Clinical parameters (growth rate, feed and water consumption, daily inspection, urine analysis) during the 28 days indicated the water-soluble chitosan did not induce any abnonnal changes. There were no abnormal findings due to the administration of the test substance in gross and microscopic findings. We had not found alteration in absolute and relative organ weight between the control and treated groups, with only exception in the liver but lacking dose-dependency. The results of hematology and serum biochemistry examination revealed that no treatment related changes were between control and all dose groups. In conclusion, it was suggested that subacute toxicity of the water-soluble chitosan was low and the no-observed adverse effect level was considered to be over 2,000 mg/kg in rats.

팔당호 상류수계에 위치한 공공 하수종말처리시설의 총인 배출 최적관리 (Optimal Management Scheme for Phosphorus Discharged from Public Sewage Treatment Plant Located in Upstream Basin of Paldang Lake)

  • 우영국;박은영;전양근;정명숙;임재명
    • 한국물환경학회지
    • /
    • 제27권2호
    • /
    • pp.200-209
    • /
    • 2011
  • The purpose of the study is to optimally manage sewage treatment plant with analysis of phosphorus contribution and improvement of water quality contributing rate in the effect of inflowing point of effluent and Pal-Dang lake after reducing T-P discharge from large scale public sewage treatment plant at upstream of Pal-Dang lake. Also, this study, for enforcement of T-P in effluent, plans optimal management of effluent T-P through examining propriety of environmental, technological, and economical aspect such as water quality standard of domestic and foreign T-P and related policy. In regarding optimal management of T-P discharged from public sewage treatment plant located in upstream of Pal-Dang lake, the study drew following conclusions. With the optimal management of public sewage treatment plant, it showed that a pollution level became higher in the order of Sumgang E in South-Han river, C in Dalcheon, B1 B2, A in North-Han river, and J in Kyungancheon, and it is required reduction of T-P first. The highest value in analysis of benefit-costs from sewage treatment plant in the selected research area was Kyungan B, and the others are with the order of Jojong A, Bokha A, Kyungan A, and Yanghwa A. With result of this study, all 14 areas are required more enforced phosphorus treatment. The study resulted that the most top priority areas were Hangang F, Sumgang B, and Gyungan A, top priority areas were Bokha A, Dalcheon B, and Cheongmi A, priority areas were Hangang E, Heukcheon A, Gyungan B, and Jojong A, and potential areas were Sumgang A, Yanghwa A, Dalcheon A, and Hangang D. It seems to be appropriate to apply 0.2 mg/L of T-P treatment for water supply source reservation, 0.5 mg/L for the other areas by locally, and 0.2~0.5 mg/L for biological nitrogen phosphorus treatment method and 0.5~1 mg/L for Conventional Activated Sludge by technologically. Also, it may be appropriate to apply 0.2 mg/L for the most top priority area(I), 0.3 mg/L for the top priority area(II), 0.4 mg/L for priority area(III), and 0.5 mg/L for potential area(IV) by the separation of priority area.

Sous-vide가열과 열탕가열 조건에 따른 콩나물 머리와 줄기의 조직감 변화에 관한 연구 (Investigation of the changes in texture of soybean sprout depending on the heating conditions in sous-vide and conventional hot water cooking)

  • 이윤주;정화빈;윤원병
    • Journal of Applied Biological Chemistry
    • /
    • 제61권3호
    • /
    • pp.219-226
    • /
    • 2018
  • 본 연구에서는 형상이 일정하지 않은 콩나물의 조직감 측정 방법을 도출하고 가열처리 방법 및 시간에 따른 콩나물의 물리적 품질인자를 분석하였다. 조직감 측정을 위하여 실린더와 칼날형 프로브를 이용하여 deformation 시 프로브와 샘플이 접촉하는 면적의 고려 유무에 따라 표준편차가 적은 측정법을 평가하였다. 앞서 도출된 조직감 측정 방법으로 콩나물을 conventional cooking, sous-vide 방법을 이용하여 콩나물을 0, 10, 20, 30 min 가열 하였을 때의 물리적 품질특성을 비교하였다. 콩나물의 자엽은 조직감 측정 축 방향에 따라 유의미한 차이가 없었으며(p <0.05), 칼날형 프로브를 이용하여 프로브의 칼날과 콩나물의 장축이 수평인 방향으로 조직감을 측정하여, 프로브와 샘플이 30% deformation시 접촉하는 면적을 고려한 true stress를 측정하는 것이 표준편차가 작았다. 콩나물의 배축은 프로브와 샘플이 접촉하는 면적을 고려한 조직감 측정법을 이용하여 실린더와 칼날형 프로브로 측정 시 모두 유의미한 차이를 보였다. 또한, 가열처리 방법에 따른 조직감 측정 결과와 관능평가 결과 사이에는 상관관계가 있었으며, 콩나물은 conventional cooking 방법으로 가열하는 것이 관능평가에서 더 높은 점수를 얻었다.

Effect of Controlled Hydration on Germination of Tobacco Seeds

  • Min, Tai-Gi;Yoon, Hyo-Jung
    • 한국작물학회지
    • /
    • 제48권4호
    • /
    • pp.322-325
    • /
    • 2003
  • Controlled hydration treatment of tobacco seeds enhanced seed performance greatly without additional materials associated with conventional osmotic or solid matrix priming technique. The seeds were hydrated by adding water to a level from 10 to 60% by 5% increments and incubated for 8 days at $25^{\circ}C$. After the treatment, the seeds were dried to the original seed moisture content under $20^{\circ}C$ for 72 hours. The moisture content of tobacco seeds equivalent to 35% by the hydration treatment gave the greatest improvement in germination rate and speed compared to untreated or polyethylene glycol (PEG) primed seeds, especially at low temperature of $15^{\circ}C$.

Application of Membrane Processes to the Treatment of Wastewaters in Japan

  • Yamamoto, Kazuo
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1995년도 제3회 하계분리막 Workshop (환경과 막분리 공정의 역할)
    • /
    • pp.39-50
    • /
    • 1995
  • The membrane processes that are commonly uscd in water and wastewater treatment are reverse osmosis (Ro), ultrafiltration (UF) and microfiltration (MF), which utilize pressure differentials. There is also nano-filtration (NF), or low-pressure reverse osmosis, which is positioned midway between conventional reverse osmosis and ultrafiltration. Reverse osmosis membranes reject dissolved ions, while ultrafiltration can be used to reject relatively larger molecules, such as protein, polysacchalides and so on. Microfiltration is capable of eliminating particles at submicron level. This paper summarizes the characteristics of MSAS process first, as it is the main membrane process applied to wastewater treatment. Two successful examples of the applications, the cases of individual building reuse system and nightsoil treatment, are then shown. The latest trend of new membrane applications, i.e., immersed-type MSAS is also introduced.

  • PDF

농산물 저온유통용 내수 골판지 상자의 제조(제2보) - 골판지의 내수 및 내습성 향상을 위한 약품 적용 방법 - (Manufacture of Water-Resistant Corrugated Board Boxes for Agricultural Products in the Cold Chain System(II) - Application Methods of Chemicals for Improving Water and Moisture Resistance of Corrugated Boards -)

  • 조중연;민춘기;신준섭
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2004년도 춘계학술발표논문집
    • /
    • pp.192-210
    • /
    • 2004
  • Application methods of chemicals were investigated tn minimize strength reduction of corrugated boards under the high humidity environment encountered in the cold chain system. Starch insolubilizers were introduced in the starch solution preparation of the Stain hall method and their insolubilization effect of starch binder were estimated. The performance of water repellent agents(WRA) and moisture proof agents(MPA) were evaluated in terms of water and moisture resistance. And effects of the combination of the chemicals and the coating method were also examined. Addition of the polyamine polyamide insolubilizer to the main part in the Stain hall process improved the binding force and water resistance of starch, which contributed to minimize the strength reduction of paper under the high humidity environment. AZC and Glyoxal type insolubilizers could not be used in the experiment due to an excessively increased viscosity of starch solution and the poor stability. Conventional WRA treatment to the base paper enhanced water and moisture resistance very slightly even though water repellency of the paper reached R10 by the treatment. MPA showed excellent performance than WRA not only in water and moisture resistance but in water repellency. Double coating on paper with MPA was more effective than the single coating at the same coating weight. A newly developed MPA showed excellent performance and runnability only by a single coating instead of a double coating.

  • PDF