• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1689-1693
• /
• 2003

Communication based train control system is applied regularly worldwide. And this system may be used in domestic soon. Communication based train control system does not depend on conventional track circuit. Therefore, position and distance control of train to prevent collision with leading train may become important safety factor. This paper developed collision avoidance algorithm to control trains of several units efficiently for this. In developing a collision avoidance algorithm, it is desirable to avoid the need for additional system. Additional system restricts the development of the algorithm by limiting the effectiveness of the algorithm to only those areas where the additional system can be afforded and has been installed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.175-177
• /
• 2008

The level crossing collision accident which comprises more than 90 percent of all level crossing accidents is one of the most serious safety problems. There is a critical need for providing safe strategy and is focusing on the level crossing information rather than measures at a grade crossing. This study is intended to develop technology for accident prevention and damage reduction based on accident cases analysis result and improvement direction to complement shortcomings of safety equipment of conventional level crossing and to establish safety of travelers(train, motor vehicle, person).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.435-437
• /
• 2003

Recently, as the road capacity reaches the limit and environmental problems becomes serious, there is gradually increased a need for railroad vehicles that are environment-friendly and have time regularity, reliability and safety. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. We developed the hardware and software of the measurement system for on-line test and evaluation of korean hish speed train. The software controls the hardware of the measurement data and acts as interface between users and the system hardware. In this paper, we is studied for electric apparatus performance of railway vehicle using sensor. In order to this test is developed signal conversion system. Using this system, we obtained important result for pantograph voltage, battery voltage, axle speed, and running speed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.179-180
• /
• 2007

신설한 기존선 전철화 노선에서 영업운행을 시작하기 전에 차량의 성능과 급전설비의 용량을 선로의 상태를 고려하여 평가하는 것이 중요하다. 본 논문에서는 개통을 앞두고 있는 경부선 기존선 대전-동대구 구간을 대상으로 한국형 고속열차를 주행하고 속도단계를 올리며 차량 부하전류와 등가방해전류 시험을 수행하고 그 결과를 소개한다.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권6호
• /
• pp.255-261
• /
• 2002

Recently, traction motors in trains are supplied with single phase a.c. power. After this power is converted to d.c. power, it is inverted to three phase power to operate traction motors. As going through the process of the conversion, harmonic current is generated in train. The method of conventional analysis on harmonics, studied by RTRI, is modeled with equivalent circuit of ac AT-fed electric railroad system using by the distributed constant circuit. However, this circuit as two-port network model has some difference in comparison with real system. The reason why the conventional method is different from the real system is that the conventional method dose not include three conductor groups, that is catenary, rail, and feeder, and admittance between the conductors for line capacitance. Therefore, this method has a little error. This paper proposes new method to more effectively estimate Harmonic current. In this method, numerous components in electric railway are categorized and each component is defined as a four- port network model. The equivalent circuit for the entire power supply system is also described into a four-port network model with connections of these components. In order to evaluate the efficiency and the accuracy of a proposed method, it is compared with values measured in Kyung-Bu high speed line and ones calculated by the conventional method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.497-499
• /
• 2008

Tilting train has been developed to increase the operational speed of the trains on conventional lines which have many curves. This train are lilted at curves to compensate for unbalanced carbody centrifugal acceleration to a greater extent than compensation produced by the track cant so that passengers do not feel centrifugal acceleration and thus trains can run at higher speed at curves. This paper developed tilting train to evaluate train performance of TTX(korean tilting train express) with maximum operation speed 160 km/h on Ho_nam Conventional Rail[1].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1121-1123
• /
• 2006

Tilting trains are now an established feature of railway operations throughout the world. For intercity traffic, tilt provides operators with increasing speeds, and therefore enhanced competitiveness, on existing routes where insufficient traffic or a lack of funds precludes the construction of a dedicated new high-speed railway. This paper explains the reduction effects of journey time with the Korean tilting train. The Korean Tilting Train express (TTX) project has been carried out to develop alt the core technologies related to tilting train and infra-technology to provide high speed inter-city service with the speed of 180 km/h as well as maintenance-free technology for conventional railway system. In order to simulate we considered 5 conventional railway. As a results of simulation, we found out the tilting train has very high efficiency(reduction rate 20-30%).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.2194-2195
• /
• 2011

The propulsion system of next generation electric vehicle is different from the structure and control methods compared with conventional induction motor vehicles by applying an interior permanent magnetic synchronous motor. Permanent magnet motor should be controlled by each individual motor, propulsion device have 1C1M structure by a single inverter to control a single motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1076-1078
• /
• 2001

In this paper, we studies PWM control method for 400kVA inverter. This method is compared with the conventional sinusoidal modulation method applying to the power converter with large capacity. The inverter controls a PWM modulation using a DSP processor.

• 한국시뮬레이션학회논문지
• /
• 제6권2호
• /
• pp.59-69
• /
• 1997

This paper proposes a simulation method of train control system to increase railroad transportation capacity in the Seoul Subway. Comparing with the conventional fixed block system, a new train operation method of "moving block system" shows a more capability of same railroad. A graphic simulation program is developed for application of moving block system to Seoul subway train control system. The result of the simulation program shows a shorten headway i.e. a more dense operation of trains and a higher efficiency of railroad with the suggested moving block system.