• Archives of Plastic Surgery
• /
• v.36 no.2
• /
• pp.194-199
• /
• 2009

Purpose: The orbital fat buldging may cause irregular contour of lower eyelid, which is not youthful appearance. The conventional method of fat excision may cause the eyeball to move backward and downward, making enopthalmia is inevitable. The transcutaneous approach to reach the orbital septum can increase the risks of scleral show resulting from scarification at the level of the septum orbicularis junction and damaging the vertical motor branches of the preseptal orbicularis oculi muscle of the lower eyelid. Method: From July 2007 to March 2008, total of 21 patients underwent transconjunctival capsulopapebral fascia fixation procedure. In 8 patients, the herniated fat pad of the lower eyelid was relocated back into the orbit without external skin excision using capsulopalpebral fascia fixation. But in 13 patients, excision of redundant skin of the lower eyelid was performed using pinching technique, not involving orbicularis oculi muslce. In 5 patients, lateral canthotomy was done bilaterally for good visual field. In 6 patients, lateral canthopexy was also combined to correct loosening of lower eyelid. Results: Most of the patients were satisfied after at least 5 months of follow up. No patient showed scleral show. But 2 patients complained of undercorrection slightly, without secondary operation in 1 patient and re - capsulopalpebral fascia fixtation through transconjunctival approach in another patient. Conclusion: Orbital fat repositioning using transconjunctival capsulopalpebral fascia fixation is a good procedure to show youthful appearance without increasing the risk of scleral show and also showed fast recovery compared to the conventional transcutaneous approach.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.35-40
• /
• 2003

This paper presents a method for designing layout on the yard and evaluating alternative designs of the layout by applying simulation. The method is based on the concepts of the conventional port container terminal with a perpendicular yard layout. In general, yard design of the container terminal is consists of the two major parts. One is to divide yard area between the number of sections and the number of runs and the other is to decide the number of equipment that is the yard truck and yard crane. In the past days, this design was depended on the experience of the terminal operator and the structure of the conventional terminal layout because it is a very complex decision problem. In this paper we suggest the method of yard design as a conceptual procedure and estimate the efficiency of the container crane and the optimal the number of equipment using the simulation. Numerical examples are provided in order to illustrate the conceptual procedure. As the example, the suggested method and simulation are applied to the virtual container terminal with a perpendicular yard layout. In the results, the number of sections and runs on yard area, the number of yard truck per container crane and the number of yard crane per run are decided. In additional, the traffic among blocks on yard layout is estimated in terms of rate.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.54-60
• /
• 2015

The use of serial concatenated codes is an effective technique for alleviating the error floor phenomenon of low-density parity-check (LDPC) codes. An enhanced sum-product algorithm (SPA) for LDPC codes, which is suitable for serial concatenated codes, is proposed in this paper. The proposed algorithm minimizes the number of errors by using the failed check nodes (FCNs) in LDPC decoding. Hence, the error-correcting capability of the serial concatenated code can be improved. The number of FCNs is simply obtained by the syndrome test, which is performed during the SPA. Hence, the decoding procedure of the proposed algorithm is similar to that of the conventional algorithm. The error performance of the proposed algorithm is analyzed and compared with that of the conventional algorithm. As a result, a gain of 1.4 dB can be obtained by the proposed algorithm at a bit error rate of $10^{-8}$. In addition, the error performance of the proposed algorithm with just 30 iterations is shown to be superior to that of the conventional algorithm with 100 iterations.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.2
• /
• pp.27-33
• /
• 2020

Backward compatibility is one of the key issues for radio equipment supporting IEEE 802.11, the typical wireless local area networks (WLANs) communication protocol. For a successful packet decoding with the backward compatibility, the frame format detection is a core precondition. This paper presents a novel frame format detection method based on a deep learning procedure for WLANs affiliated with IEEE 802.11. Considering that the detection performance of conventional methods is degraded mainly due to the poor performances in the symbol synchronization and/or channel estimation in low signal-to-noise-ratio environments, we propose a novel detection method based on convolutional neural network (CNN) that replaces the entire conventional detection procedures. The proposed deep learning network provides a robust detection directly from the receive data. Through extensive computer simulations performed in the multipath fading channel environments (modeled by Project IEEE 802.11 Task Group ac), the proposed method exhibits superb improvement in the frame format detection compared to the conventional method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.402-406
• /
• 1995

The shadow moire is one the optical techniques which able to give contour lines of an object with respect to a master grating plane. The moire patterns are issued from the superposition of a grating and its shadow projected on the surface of an object. But in the conventional shadow moire method the reference grating and deformed grating are mutually dependent, it is impossible to obtain uniform phase shifts on the whole field by moving the reference grating. Here we propose ane trial to apply phase shifting to conventional shadow moire. When, in the conventional arrangement, Phase-shifting that is sctually constant regardless of fringe orders is achieved by moving the grating and the light source. Finally we obtained a better result by using this procedure and applied the phase shifting shadow moire to three dimensional measurement.

• International Journal of Contents
• /
• v.1 no.1
• /
• pp.29-34
• /
• 2005

In this paper, we proposed an advanced authentication structure for reducing the certificate acquisition time which is one of the factors that should be improved in a conventional wireless PKI. A conventional key exchange method simply performs the key exchange setup step based on discrete algebraic subjects. But the mutual-authentication procedure of wireless PKI for reducing authentication time uses an elliptical curve for a key exchange setup step. We simulated and compared the authentication structure proposed by Sufatrio, K. Lam[4] and proposed authentication structure in terms of the authentication time. Simulation results show that the proposed method reduces the authentication time compared to the conventional wireless PKI authentication method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.351-355
• /
• 2003

In this paper, a new barrier rib forming method of embossed barrier rib (EBR) formation process for the PDP rear panel was introduced. The process is mainly composed of green sheet fabrication, lamination of the green sheet on the rear glass panel having data electrodes, and roll embossing followed by firing. The EBR process has two advantages over the conventional barrier rib forming methods. One is the process requires less equipment investment than the conventional methods by about 20% of the current rear panel fabrication equipment investment owing to the simplified fabrication process. The other advantage is its reduced rear panel manufacturing cost by eliminating the time consuming and complicated processes and waste of materials in the conventional methods. In this study, general procedure of EBR fabrication process is described and the characteristics of prototype PDP using EBR panel are discussed.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.59-62
• /
• 2000

As the density of memories increases, unwanted interference between cells and coupling noise between bit-lines are increased and testing high density memories for a high degree of fault coverage can require either a relatively large number of test vectors or a significant amount of additional test circuitry. From now on, conventional test algorithms have focused on faults between neighborhood cells, not neighborhood bit-lines. In this paper, a new algorithm for NPSFs, and neighborhood bit-line sensitive faults (NBLSFs) based on the NPSFs are proposed. Instead of the conventional five-cell and nine-cell physical neighborhood layouts to test memory cells, a three-cell layout which is minimum size for NBLSFs detection is used. To consider faults by maximum coupling noise by neighborhood bit-lines, we added refresh operation after write operation in the test procedure(i.e., write \longrightarrow refresh \longrightarrow read). Also, we present properties of the algorithm, such as its capability to detect stuck-at faults, transition faults, conventional pattern sensitive faults, and neighborhood bit-line sensitive faults.

• Transactions of Materials Processing
• /
• v.19 no.7
• /
• pp.399-404
• /
• 2010

We propose an analysis model for simulating the detailed procedure of pore closing in open die forging of shafts. In the analysis model, an artificial symmetric plane is used, on which initial pores are located to be traced. The analysis model is employed to carry out three-dimensional simulation of pore closing in shaft free forging by both conventional free forging press and radial forging machine. With this result, two typical types of free forging equipment for manufacture of shafts are compared in detail. It has shown that the radial forging machine is much superior to the conventional open die forging press especially in pore closing under high hydrostatic pressure with sound strain.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.285-294
• /
• 2003

This study was carried out to propose a new-concept internal combustion engine which has great potential advantages to the conventional engines. Proposed new-concept engine is a kind of rotary engine. A rotor is rotating concentrically in a cylinder which is divided into two partitioning valves, and it makes four compartments in the cylinder. The volumes of each of four compartments are changing continuously with the rotor movement and performs the functions of intake, compression. expansion and exhaust simultaneously. Expected thermal efficiency for the real cycle is 26 percent at conditions of 1,000 rpm and compression ratio of 8.0, which is 3 to 4 percent higher than that of the conventional engines such as the piston engine, gas turbine and Wankel rotary engine. A simulation procedure proved that the new concept engine is functional, and has many potential advantages compared to the existing conventional engines.