• 한국세라믹학회지
• /
• 제35권6호
• /
• pp.640-646
• /
• 1998

PbO-TiO2-B2O3-BaO계 유리에서 PbTiO3의 핵생성 및 결정화를 위한 최적조건의 확입을 위해 핵생성 속도 곡선을 도출하고자 열시차 분석법(DTA)을 응용하였다. PbTiO3의 함량비가 60mol%인 4성분계 유리 샘플은 용융액으로부터 자연 냉각시켜 제조되었으며, 핵생성을 위해 유리 샘플은 40$0^{\circ}C$와 50$0^{\circ}C$ 사이에서 열처리하였다. 이때 46$0^{\circ}C$에서 핵생성 속도가 최대값을 나타내었다. DTA의 결정화 피크 온도는 핵생성을 위한 열처리시간이 증가함에 따라 감소하였으며, DTA의 승온속도에 비례하여 증가하였다. 이러한 결과는 계에 생성된 핵의 밀도가 핵생성 처리온도와 시간의 증가에 따라 증가함을 보여주고 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3049-3052
• /
• 2008

MCFC(molten carbonate fuel cell) power generation system is prime candidate for the utilization of fossil based fuels to generate ultra clean power with a high efficiency. In the MCFC power plant system, a combustor performs a role to supply high temperature mixture gases for cathode and heat for reformer by using the stack off-gas of the anode which includes a high concentration of $H_2O$ and $CO_2$. Since a combustor needs to be operated in a very lean condition and to avoid excessive local heating, catalytic combustor is usually used. The catalytic combustion is accomplished by the catalytic chemical reaction between fuel and oxidizer at catalyst surface, different from conventional combustion. In this study, a mathematical model for the prediction of internal flow and catalytic combustion characteristics in the catalytic combustor adopted in the MCFC power plant system is suggested by using the numerical methods. The numerical simulation models are then implemented into the commercial CFD code. After verifying result by comparing with the experimental data and calibrated kinetic parameters of catalytic combustion reaction, a numerical simulation is performed to investigate the variation of flow and combustion characteristics by changing such various parameters as inlet configuration and inlet temperature. The result show that the catalytic combustion can be effectively improved for most of the case by using the perforated plate and subsequent stable catalytic combustion is expected.

• 한국태양에너지학회 논문집
• /
• 제38권2호
• /
• pp.55-66
• /
• 2018

South Korea aims to shift the 20 percent of electricity supplement from the fossil fuel including the nuclear to renewable energy systems by 2030. In order to realize this agenda in the buildings, the plus energy house is necessary to increase the renewable energy supplement beyond the zero energy house. This paper suggested KePSH (KIER Energy-Plus Solar House) and energy performance of house and renewable energy systems was investigated. The KePSH has the target of generating 40% surplus energy than the conventional house energy consumption. The plus energy house is the house that generates surplus energy from the renewable energy sources than that consumes. In order to minimize the cooling and heating load of the house, the shape design and passive parameters design were conducted. Based on the experimental data of the plug load in the typical house, the total energy consumption of the house was estimated. This paper also suggested renewable energy sources integrated HVAC system using air-source heat pump system. Two cases of renewable energy system integration methods were suggested, and energy performance of the cases was investigated using TRNSYS 17 program. The results showed that the BIPV (building integrated photovoltaic) system (i.e., CASE 1) and BIPV and BIST system (i.e., CASE 2) shows 42% and 29% of plus energy rate, respectivey. Also, CASE 1 can generate 59% more surplus energy compared with the CASE 2 under the same installation area.

• 대한화학회지
• /
• 제54권2호
• /
• pp.228-233
• /
• 2010

최근 금(Au)과 은(Ag) 나노입자는 항균성의 특징으로 다양한 분야에서 응용되고 있다. 본 연구는 HEMA (2-hydroxyethylmethacrylate), NVP (N-vinyl pyrrolidone) MMA (methylmethacrylate)에 금과 은 나노입자를 첨가하였으며, $70^{\circ}C$에서 약 40분, $80^{\circ}C$에서 약 40분 마지막으로 $100^{\circ}C$에서 약 40분 동안의 열처리 공정을 거쳐 공중합 하였다. 중합 과정을 거쳐 중합된 고분자를 통해 물리적 특성을 측정한 결과, 함수율 28.43% ~ 35.27%, 굴절률 1.429 ~ 1.440를 나타내었으며, 가시 광선 투과율 79.2% ~ 86.5% 그리고 인장강도 값은 0.125 kgf ~ 0.201 kgf을 나타내었다. 본 실험 결과로 볼 때 항균성을 가지면서 기존의 콘택트렌즈의 물리적 특성에도 부합되는 공중합체가 생성된 것으로 판단된다.

• 대한화학회지
• /
• 제54권2호
• /
• pp.222-227
• /
• 2010

본 연구는 기존 콘택트렌즈 재료에 Au colloid를 첨가한 후 농도조건을 다양화 하여 $70^{\circ}C$에서 약 40분, $80^{\circ}C$에서 약 40분 마지막으로 $100^{\circ}C$에서 약 40분 동안의 열처리 공정을 거쳐 공중합 하였다. 중합 후 생성된 고분자를 사용하여 콘택트렌즈를 제조하고 물리적 특성을 측정한 결과, 산소투과율 $9{\sim}12{\times}10^{-9}$ cm/s mL $O_2$/mL ${\times}$ mmHg, 함수율 27.84% ~ 32.17%, 굴절률 1.432 ~ 1.443을 나타내었으며, 가시광선 투과율 83.2% ~ 89.5% 그리고 인장강도 값은 0.141 kgf ~ 0.152 kgf를 나타내었다. 또한 생성된 고분자는 콘택트렌즈로 사용 가능한 물리적 특성에 부합되어 안 의료용 기능성 소재로의 응용이 충분히 가능할 것으로 판단된다.

• 한국재료학회지
• /
• 제10권4호
• /
• pp.264-269
• /
• 2000

$TiO_2$sol(30wt%, anatase)을 이용하여 스핀코팅으로 유리기판에 $TiO_2$박막을 제조하였다. 박막의 두께는 코팅주기의 횟수가 조절하였다. 한 코팅주기는 스핀코팅, 건조, 열처리를 포함한다. 박막의 반응성은 막 위에서의 자외선강도가 0.44와 2.mW/$\textrm{cm}^2$인 조건에서 벤젠기체의 광분해 속도를 통해 조사하였다. 박막의 두께가 증가할수록 표면적으로 증가로 인해 반응성은 증가하였으며, 0.44mW/$\textrm{cm}^2$일 때 4$\mu\textrm{m}$정도 이상의 두께에서 반응성은 더 이상 증가되지 않았다. porous한 $TiO_2$박막은 비교적 넓은 유효표면적을 가지고 있으며, 그것은 비교적 높은 자외선 강도하에서 박막두께에 따라 반응속도를 증가시키는 결과를 낳았다.

• 한국항공우주학회지
• /
• 제40권6호
• /
• pp.536-541
• /
• 2012

새로 설계된 항공기 장착용 외장형 포드의 비행 시험용 계측포드를 설계하였다. 계측포드는 하중, 진동환경 및 공력 가열등 일반적인 항목뿐만 아니라 공력음향 환경에 대한 측정이 가능하도록 제작하였다. 특히 본 논문에서는 국내 최초로 수행 예정인 비행공력 음향 환경 측정에 대하여 집중적으로 다루었다. 계측포드는 MIL-HDBK-1763과 MIL-STD-810 Method 515에서 요구한 공력음향 시험요구 조건을 만족하도록 설계/제작되었다. MIL-STD-810에서 제시한 방법을 활용하여 공력음향 센서의 위치와 측정범위를 결정하였다. 센서는 혹독한 비행시험 환경을 고려하여 ENDEVCO 8510B-2를 사용하였다. 완성된 계측포드의 성능 시험을 위하여 KF-16 Sta. 5에 장착 후 지상 Run-Up 시험을 수행하여 자료를 획득하였다. 자료 분석결과 시스템은 정상적으로 작동하였으나, 공력음향 센서의 측정 범위를 상회하는 음압이 측정되어 비행 시험시 측정범위의 변경이 요구되었다.

• 한국주조공학회지
• /
• 제22권2호
• /
• pp.69-74
• /
• 2002

The effects of heat treatments and alloying elements on the microstructure and mechanical charaterisitics of specially austempered ADIs containing alloying elements such as Cu, Mo and Ni were investigated. To compare with the effect of conventional and normal(CN) austempering treatment, two kinds of special austempering treatments which are those with pre-quenching and pre-heating were conducted. The hardness and uniaxial fatigue tests were carried out to evaluate the mechanical charateristics. The hardness of ADI treated by CN heat cycles was higher than those of other ADIs. Cu added ADI (Cu-ADI) tempered at 400 after austenitizing exhibited the highest fatigue life cycles. While austempering after prequenching makes the austenite with high carbon stable, which resulted in transformation to highly strengthened bainites from the carbon enriched austenite phases during tempering. The high carbon enriched banites is considered to improve the fatigue strength.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.16-28
• /
• 2014

This paper presents a novel high-power-factor circuit topology of AC to AC current-fed type high frequency resonant inverter which includes the function of power factor correction(PFC) in the proposed inverter to operate the AC input block with high power factor. The proposed circuit topology of AC to AC current fed type high resonant inverter removes DC link electrolytic capacitor and has also the one of power factor correction(PFC) in the inverter circuit without an additional PFC circuit since the input current by constituting it in parallel as an unit inverter, which assumes the class-E high frequency resonant inverter of conventional current-fed type, flows in the form of the resultant current flowing through each constant current reactor($L_{d1}$, $L_{d2}$). The circuit analysis of proposed inverter is generally described by adopting the normalized parameters and the evaluation of its operating characteristics are conducted by using the parameters such as the ratio of switching and resonant frequency(${\mu}$), coupling coefficient(k) and so on. An example of procedure for circuit design based on the characteristic values obtained from the theoretical analysis is presented. To confirm the validity of the theoretical analysis, the experimental results are also presented. In the future, the proposed inverter shows it can be practically used as power supply system for induction heating application, DC-DC converter etc.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.364-375
• /
• 2014

Parametric array transducers are used for long-range and highly directional communication in an underwater environments. The power amplifiers for parametric array transducers should have sufficient linear output characteristic and high efficiency to avoid communication errors, system heating, and fuel problems. But the conventional power amplifier with fixed source voltage is very low efficient due to large power loss by the big difference between the fixed source voltage and the amplifier output voltage. Thus to solve the problems this paper proposes the high efficiency power amplifier for parametric array transducers. The proposed power amplifier ensures high linearity of output characteristic by utilizing the push-pull class B type amplifier and furthermore gets high efficiency by applying the envelope tracking technique that variable source voltage tracks the envelope of the amplified signal. Also the paper suggests the detailed circuit topology and design guideline of class B push-pull type amplifier and variable output voltage AC/DC converter. Its characteristics are verified by the detailed simulation and experimental results.