• 대한기계학회논문집A
• /
• 제29권8호
• /
• pp.1093-1101
• /
• 2005

Hybrid mass damper systems have recently been introduced as a dynamic vibration absorber to exploit the benefits of both the conventional tuned mass damper system and the active control system. A hybrid system is programmed to function as either a conventional TMD or as an active system according to the wind conditions and the resultant building and damper mass vibration characteristics. This paper deals with the design of the robust controller for the control of the flexible box structure. The control algorithm was devised based on $H_2$(LQG) robust control logic with acceleration feedback and to improve the capability of the controller Kalman Filter was accepted for the system. To test the ability of the robust controller using the linear motor damper system, performance tests and simulations were carried out on the full-scale steel frame structure. Through the performance tests, it was confirmed that acceleration levels are reduced down.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.444-448
• /
• 2005

This paper presents a developing procedure of the CAN-based real-time simulator for car body control, aiming at replacing the actual W/H (Wiring Harness) and J/B(Junction Box) couple eventually. The CAN protocol, as one kind of field-bus communication, defines the lowest 2 layers of the ISO/OSI standard, namely, the physical layer(PL) and the data link layer(DLL), for which the CSMA/NBA protocol is generally adopted. For CPU, two PIC18Fxx8x's are used because of their built-in integration of CAN controller, large internal FLASH memory (48K or 64K), and their costs. To control J/B's and actuators, 2 controller boards are separately implemented, between which CAN lines communicate through CAN transceivers MCP255. A power motor for washing windshield, 1 door lock motor, and 6 blink lamps are chosen for actuators of the simulator for the first stage. For the software architecture, a polling method is used for the fast global response time despite its slow individual response time. To improve the individual response time and to escape from some eventual trapped-function loops, High/Low ports of the CPU are simply used, which increases the stability of the actuator modules. The experimental test shows generally satisfactory results in normal transmitting / receiving function and message trace function. This simulator based on CAN shows a promising usefulness of lighter, more reliable and intelligent distributed body control approach than the conventional W/H and J/B couple. Another advantage of this approach lies in the distributed control itself, which gives better performance in hard real-time computing than centralized one, and in the ability of integrating different modules through CAN.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.284-287
• /
• 2004

본 논문의 목표는 일체형 디지털 TV에서 디지털 방송 수신과 방송 컨텐츠를 녹화, 저장, 재생이 가능할 뿐만 아니라 조만간 시작될 데이터 방송을 수신할 수 있는 내장형 디지털 방송수신 및 개인 비디오 저장 시스템 Platform 개발이다. 디지털 방송과 데이터방송 수신이 가능한 Set-Top Box 기능, 수신된 방송의 저장 및 재생이 가능한 PVR 기능을 지원할 수 있는 시스템의 구조를 설계하였다. 고품질 디지털 방송 서비스가 본격적으로 시작됨에 따라 디지털 방송 수신기와 PVR 기능이 복합된 제품의 수요가 증가할 것으로 예상되며 이러한 고성능 복합시스템은 필수적일 것이다. 이러한 기능을 수행하기 위하여 시스템 제어를 위한 CPU로는 PMC-Sierra 사의 MIPS Architecture에 기반을 둔 RM5231을 채택하고, Teralogic 사의 TL811 System Controller을 채택하여 시스템을 이루고 있는 각종 디바이스를 구성하고, MPEG-2 Demux/Decoding을 위해 Teralogic TL851 Graphics & Display Processor을 채택하였다. 개발된 시스템을 테스트하기 위하여 현재 각 방송사들의 시험 방송을 수신하고 PVR 기능을 테스트하였다.

• Journal of Biosystems Engineering
• /
• 제26권6호
• /
• pp.535-544
• /
• 2001

This study developed a manipulator for robotic harvester to harvest cucumber. The manipulator was designed and built fur transferring an end-effecter from a fixed point to a specified cucumber. Its development involved the integration of a manipulating system with a PC compatible, DC motors, geared boxes, timing belts, and a motor controller board. Software, written in Quick basic. combined the functions of motor control with various circumstances. In order to move smoothly and rapidly the manipulator, it's shoulder link and elbow link were minimized by using rotational inertial moment without a motor and a geared box. After 30 replications of exercising the manipulator, it was concluded that the precision values of the X, Y and Z axes were less than 0.5mm, 7.25mm and 0.35mm, respectively. The precision data indicated the manipulator was not missing any steps fur the harvester to reach a target cucumber.

• 한국기계가공학회지
• /
• 제20권6호
• /
• pp.108-113
• /
• 2021

Recently, a new concept of a one-touch descending lifeline has been proposed to address the drawbacks of the conventional descending lifeline, which can be easily installed and quickly evacuated in the case of a fire emergency. All separate parts for escape are initially mounted in a box, and the link-type support is spread out of the window by pushing the handle attached to the box. In this study, the proposed double square linkage mechanism was redesigned, and its safety is verified by determining an appropriate moment of inertia of the link through finite element analysis using Abaqus. The shape and assembling method of the reel and speed controller were also modified such that the safety belt was simultaneously unfolded with link-type support. Finally, the feasibility of the proposed one-touch all-in-one descending lifeline was confirmed through fabrication.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.573-578
• /
• 2008

최근 가정환경의 홈 씨어터를 동작시키기 위해서는 TV, 오디오, DVD, Video, 셋탑박스 등 여러 장치를 동시에 조작해야 한다. 이 경우 사용자가 원하는 기능을 실행하기 위해서는 여러 기기에 해당하는 리모컨 버튼의 기능과 위치를 잘 알고 있어야 한다. 이러한 현실적인 문제로 인해 사용자들은 일반적으로 자신이 원하는 기능을 선택하는데 어려움을 겪는다. 더욱이 유비쿼터스 가정환경이 현실화 되어 사용자가 조작 가능한 장치들이 늘어나면, 사용자의 혼란은 가중될 것이다. 따라서 기능을 요약해서 사용자에게 제공하는 적응적 인터페이스가 필요하다. 또한, 유비쿼터스 환경에서는 조작하고자 하는 장치 뿐 아니라 사용자 인터페이스가 표시되는 컨트롤러에도 다양한 모바일 또는 고정된 장치들이 사용되므로 각 장치의 능력이나 제약 조건에 맞게 사용자 인터페이스의 형태를 조절해 줄 필요가 있다. 제안하는 시스템에서는 상황에 따라 표현되는 기능과 형태가 변경되는 적응적 사용자 인터페이스를 구현하기 위해, 유비쿼터스 가정환경을 모델링하고, 모델링된 상황 및 장치 정보를 사용한다. 상황에 맞는 장치별 필요정도를 구현하기 위해서는 베이지안 네트워크를 사용한다. 행동 선택 네트워크는 사용자의 상황과 예측된 장치별 필요도를 입력으로 사용해 장치별로 현 상황에 필요한 기능을 선택한다. 이렇게 선택된 기능들을 실제 사용자 인터페이스가 구현될 장치에 맞게 프레젠테이션 템플릿을 이용해 실제 사용자 인터페이스로 구성하여, 적응적 인터페이스를 구성한다. 실험을 위해서는 유비쿼터스 홈 시뮬레이션 환경을 구축하고, 해당 환경을 바탕으로 장치 사용기록을 시나리오를 바탕으로 생성하였다. 생성된 시나리오를 바탕으로 장치별 필요도 추론결과를 평가하여 베이지안 네트워크가 효과적으로 사용자의 요구를 예측함을 확인하였다. 마지막으로, 14명의 사용자들에게 평가된 10개의 태스크에 대해 기존의 고정된 홈 UI와 제안하는 적응적 홈 UI를 비교해 본 결과, 생성된 적응적 홈 UI가 일반적인 태스크를 고정적 홈 UI에 비해 효과적으로 처리할 수 있음을 확인하였다.

• 생물환경조절학회지
• /
• 제18권3호
• /
• pp.200-207
• /
• 2009

This study was conducted to analyze the variations of air temperature, relative humidity and pressure in a low pressure chamber for plant growth. The low pressure chamber was composed of an acrylic cylinder, a stainless plate, a mass flow controller, an elastomer pressure controller, a read-out-box, a vacuum pump, and sensors of air temperature, relative humidity, and pressure. The pressure leakage in the low pressure chamber was greatly affected by the material and connection method of tubes. The leakage rate in the low pressure chamber with the welding of the stainless tubes and a plate decreased by $0.21kPa{\cdot}h^{-1}$, whereas the leakage in the low pressure chamber with teflon tube and rubber O-ring was given by $1.03kPa{\cdot}h^{-1}$. Pressure in the low pressure chamber was sensitively fluctuated by the air temperature inside the chamber. An elastomer pressure controller was installed to keep the pressure in the low pressure chamber at a setting value. However, inside relative humidity at dark period increased to saturation level.. Two levels (25 and 50kPa) of pressure and two levels (500 and 1,000sccm) of mass flow rate were provided to investigate the effect of low pressure and mass flow rate on relative humidity inside the chamber. It was concluded that low setting value of pressure and high mass flow rate of mixed gas were the effective methods to control the pressure and to suppress the excessive rise of relative humidity inside the chamber.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.359-364
• /
• 2004

A high-speed and intelligent CNC system has been developed by Turbotek Co., Ltd. This paper presents the study for commercialization of the developed CNC system. In order to acquire stability and reliability of the developed CNC system, its hardwares and softwares ate improved. The CNC main unit is revised to a compact box-type CNC controller. Moreover, the integrated CNC main unit that has built-in and expandable I/O modules is also developed. Remote monitoring, fault diagnosis End NURBS interpolation functions are realized on the CNC system as software modules. Through these efforts, the developed CNC system can be loaded on machine tools successfully.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 춘계학술대회논문집
• /
• pp.47-56
• /
• 2000

In this study, as the preliminary step for developing an unmanned vehicle to deliver a container-box, we designed and implemented Automatic Guided Vehicle(AGV) Simulator for the purpose of Port Facilities Automation. It is preferable to research the intelligent AGV for delivery all day long. For complementing AGV simulator driving, we used multiple-sensor systems with vision, ultrasonic, IR and adapted the high-speed wireless LAN that satisfies the IEEE 802.11 Standard for bi-directional communication between main processor in AGV and Host computer. Here, we mounted on bottom frame in AGV Pentium-III processor, which combine and compute the information from each sensor system and control the AGV driving, and used the 80C196KC micro-controller to control the actuating and steering motors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.436-440
• /
• 1996

In this study, underdeveloping heavy-load driving servo control system, which are composed of controller, electro-hydraulic servo-valve, hydraulic motor, reduction gear box, turret slew bearing and turret structure, are investigated to simplify the control system. To estimate the effect of each component, modeling and simulation of linear and nonlinear system are carried out. In the first stage, to prove the reliability of performance estimation program, simulation results are compared with experimental results. In the second stage, the effect of each component of control system is evaluated and then a simplified control system is suggested.