• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1465-1477
• /
• 1993

본 연구에서는 분말혼합체의 특성인 항복응력을 포함한 Generalized Newtonian Fluid의 구성 방정식을 도입하고 미끄럼현상을 고려한 신소재의 사출성형 충전과정 해석용 CAE(computer aided engineering)시스템을 개발하였다. 수치모사를 위한 수치해석방법으로는, 유한요소법(finite element method)과 유한차분법(finite difference method)을 함께 사용하였다. 유한요소법과 검사체적법(control volume technique) 을 병용하여 유동의 진행을 수치모사 하였으며, 유한차분법을 사용하여 온도분포를 계산하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.891-897
• /
• 2006

The volume control method which utilize a pressure node added into a finite shell element can overcome the drawbacks of conventional load control method and displacement control method. In this study, an improved volume control method is introduced for effective analysis of path-dependant behaviors of RC structures subjected to cyclic loading. RC shell structures including RC hollow columns are anlayized by discretizing the structures with layered shell elements and by applying in-plane two dimensional constitutive equations for concrete layers and reinforcement layers of the shell elements. The so-called path dependant volume control method is verified by comparing analysis results with other data including experimental results.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제11권1호
• /
• pp.95-105
• /
• 2007

A mathematical modeling for the drying process of hygroscopic porous media, such as wood, has been developed in the past decades. The governing equations for wood drying consist of three conservation equations with respect to the three state variables, moisture content, temperature and air density. They are involving simultaneous, highly coupled heat and mass transfer phenomena. In recent, the equations were extended to account for material heterogeneity through the density of the wood and via the density variation of the material process, capillary pressure, absolute permeability, bound water diffusivity and effective thermal conductivity. In this paper, we investigate the drying behavior for the three primary variables of the drying process in terms of control volume finite element method to the heterogeneous transport model on one-dimensional grid.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 가을 학술발표회 논문집
• /
• pp.585-590
• /
• 2003

To overcome the drawbacks of conventional load control method and displacement control method, the so-called volume control method was developed by utilizing a pressure node added into a finite shell element. In this study, an improved volume control method which can analyze path-dependant behaviors of RC shell structures subjected to cyclic loading effectively is developed. RC shell structures are discretized with layered shell elements and in-plane two dimensional constitutive equations for concrete and reinforcements are implemented for each layer of the shell elements. Validity of the so-called path dependant volume control method is also verified by comparing analysis results with other data including experimental results.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.9-13
• /
• 2019

본 논문에서는 원가 절감을 위한 개선된 $165^{\circ}$ 12 스텝 제어를 고려한 브러시리스 DC 전동기의 최적화 설계에 대하여 논한다. 개선된 12 스텝 제어는 기존 제어의 도통각 $150^{\circ}$을 확장시켜 전동기의 출력을 향상 시킬 수 있다. 향상된 전동기 출력을 고려한 반응 표면법을 이용한 최적화 설계를 통해서 회전자, 고정자 및 영구자석의 부피를 감소시켜 원가절감이 가능한 설계를 제시한다. 제안된 설계는 기존 전동기의 요구 사양 및 효율 향상을 만족하고 기존 전동기 중량의 약 3.5%를 저감하였다. 유한요소법을 이용한 전자계 해석을 통해 최적화 설계의 타당성을 입증하였다.

• 대한전자공학회논문지
• /
• 제26권1호
• /
• pp.48-61
• /
• 1989

본 논문에서는 게이트의 길이가 0.7${\mu}m$인 n형 GaAs MESFET를 2차원적으로 수치 해석하였으며, 이동도를 국부 전계의 함수로 취하는 드리프트 -확산 모델을 사용하였다. 이산화 방법으로는 종래에 사용되던 FDM(finite difference method), FEM(finite element method)을 사용치 아낳고 Control-Volume Formulation을 사용하였으며, numerical scheme으로는 기존의 hybrid scheme이나 upwind scheme 대신에 exponential scheme과 거의 근사한 power-law scheme을 사용하였다. 이때 드리프트 속도와 확산 속도의 비율을 나타내는 Peclet number의 개념을 사용하였으며, 이 개념을 사용하여 control volume의 경계에서 numerical scheme을 고려한 전류식을 제안하였다. 앞에서 고려한 모델들과 수치해석 방법을 사용하여 시뮬레이션한 I-V 특성은 기존 노문의 결과와 일치하였다. 따라서 본 논문의 결과가 GaAs MESFET를 위한 유용한 2차원 시뮬레이터가 될 수 있음을 확인하였다. 또한 I-V 특성외에 채널 밑바닥에서이 속도 및 전계 분포를 통해 드리프트-확산 모델을 고려한 경우에 발생하는 속도 포화의 메카니즘을 제시했고, Dipole의 발생위치 및 발생 원인과 드레인 전류와의 관계 등에 대해서도 제시했다.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2002년도 추계학술발표회 논문집
• /
• pp.63-66
• /
• 2002

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.1-8
• /
• 2005

Linear motor can be directly applied to the system needed linear motions without rotary motions. To control high-speed and high-resolution, the development of the linear motors is recently required in the high-integrated and speed process industry This paper presents thermal and vibration analyses as well as measurement standards of the newly developed linear motors through analyzing the thermal behaviors and vibration characteristics of the advanced products. The thermal measurements are conducted for comparing the developed linear motor with the advanced linear motor and the Finite Volume Method(FVM) is used to identify the measurement results. And then the vibration measurement are carried out in the developed and advanced linear motors with respect to the speed. To identify the measurement results, the Finite Element Method is utilized in the developed and advanced linear motors, respectively. The FVM, FEM, and experiments make it possible to understand these characteristics. The improvement is suggested through their results conducted experiment and analyses.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.933-944
• /
• 1996

In this paper, two new techniques, the pattern filling and the refined flow field regeneration, based on the finite element method and Eulerian mesh advancement approach have been developed to analyze incompressible viscous flow with free surfaces. The gorerning equation for flow analysis is Navier-Stokes equation including inertia and gravity effects. The penalty and Newton-Raphson methods are used effectively for finite element formulation. The flow front surface and the volume inflow rate are calculated using the pattern filling technique to select an adequate pattern among five filling patterns at each quadrilateral control volume. By the refined flow field regeneration technique, the new flow field which renders better prediction in flow surface shape is generated and the velocity field at the flow front part is calculated more exactly. Using the new thchniques to be developed, the dam-breaking problem has been analyzed to predict flow phenomenon of fluid and the predicted front positions versus time have been compared with the reported experimental result.

• Korea-Australia Rheology Journal
• /
• 제13권2호
• /
• pp.97-106
• /
• 2001

Three-dimensional flow analysis was performed by using the control volume finite-element method for design of a profile extrusion die. Because polymer melt behavior is complicated and cross-sectional shape of the profile extrusion die is changing continuously, the fluid flow within the die must be analyzed three-dimensionally. A commercially available polypropylene is used for theoretical and experimental investigations. Material properties are assumed to be constant except for the viscosity. The 5-constant modified Cross model is used for the numerical analysis. A test problem is examined in order to verify the accuracy of the numerical method. Simulations are performed for conditions of three different screw speeds and three different die temperatures. Predicted pressure distribution is compared with the experimental measurements and the results of the previous two-dimensional study. The computational results obtained by using three dimensional CVFEM agree with the experimental measurements and are more accurate than those obtained by using the two-dimensional cross-sectional method. The velocity profiles and the temperature distributions within several cross-sections of the die are given as contour plots.