• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.141-142
• /
• 2009

The PEFP (Proton Engineering Frontier Project) is constructing a 100MeV proton Linac (Linear Accelerator). The 20 MeV 20 mA proton beam has been serviced for an application in the fields of material, biological, information technology and medical sciences. For a stable and efficient acceleration of a proton beam, the control requirements must be optimized by studying various control methods. We propose that the integrated control system for the Linac machine components must be based on a distribution control method to improve a centralized control system. Based on EPICS (Experimental Physics and Industrial Control System) real-time software, the VME (Versa Module European package format) IOC (Input Output Controller) was developed under cross development environment with a RISC (Reduced Instruction Set Computer) PowerPC system. In this paper, we describe the design and implementation of distributed control system using the VME-based EPICS middleware for various components of the large proton accelerator.

• Korean Journal of Pharmacognosy
• /
• v.37 no.3
• /
• pp.169-176
• /
• 2006

This study was designed to observe the effects of Korean mistletoe(Viscum album L. var. coloratum Ohwi) hot-water extract administration on the improvement on the lipid components, apolipoprotein and blood pressure level in spontaneously hypertensive rats (SHR, Wistar strain, male) fed the experimental diets for 33 days. Concentrations of total cholesterol, triglyceride (TG), LDL-cholesterol, free cholesterol and atheroscieotic index in serum were significantly lower in the Korean mistletoe extract administration group [group KM(Korean mistletoe 10.0 g% hot-water extract)] than those in the control group. In the ratio of HDL-cholesterol concentration Korean mistletoe 10.0% hot-water extract administration group were higher percentage than in the control group. However, concentrations of total cholesterol and TG in liver and brain were significantly lower in the group KM than those in the control group. But the components of apolipoprotein (Apo) A-I and Apo A-II in serum were significantly higher in the KM group than in the control group. However, components of Apo C-II, Apo C-III, Apo E and ratio of Apo B to Apo A-I in serum were fairly reduced in the group KM than in the control group. The levels of systolic and diastolic blood pressure were significantly lower in KM cup than control group. From these results, Korean mistletoe hot-water extract administration were effective on the improvement of the lipid components, coronary heart disease and hypertension in spontaneously hypertensive rats. And particularly, Korean mistletoe extract administration were more effective as a therapeutic regimen for the control of blood pressure in hypertension.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.112-117
• /
• 1992

The Real-time Distributed Control Systems(RDCS) consist of several distributed control processes which share a network medium to exchange their data. Performance of feedback control loops in the RDCS is subject to the network-induced delays from sensor to controller and from controller to actuator. The network-induced delays are directly dependent upon the data sampling times of the control components which share a network medium. In this study, a scheduling algorithm of determining data sampling times is developed using the window concept, where the sampling data from the control components dynamically share a limited number of windows.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.514-518
• /
• 1990

This paper describes an experimental Knowledge-Based Control System, named KBCS, for manufacturing and assembly. The KBCS of five parts and function : data-base, knowledge acquisition, optimization, and graphic monitoring. The KBCS is utilized for a FMS which is of five machine centers and automatic assembly lines. Each machine can perform almost all manufacturing functions which some difference in efficiency. Buffers store temporarily the incoming components and the outing components. Parts arrive at assembly lines after many steps of manufacturing, and the transfer path and time are determined by procedural knowledge of control systems. Nine different incoming components are set up. The total control system is expected to perform four algorithms, timing algorithm ,sequencing algorithm, penalty algorithm, and cart algorithm. The construction of controller require basic components of manufacturing systems in which knowledges are formulated on the base of the results and the repeated simulation of KBCS with graphic monitoring system. Simulation results by KBCS are compared with those by the other rules of manufacturing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1587-1590
• /
• 2006

Through the engineering of recombination region and energy transfer in organic light emitting device, blue and red light emitting device with good color stability has been successfully obtained. A Color control layer (CCL), which emits green light through the energy transfer from the emission layers, has been introduced into the blue and red light emitting device for RGB white OLED. The RGB white OLED showed the current efficiency of 13 cd/A and the CIE coordinates of (0.33, 0.38) at $1000\;cd/m^2$. The device exhibited very stable spectrum with respect to operating current density and the CIE coordinates varied from (0.34, 0.38) to (0.31, 0.37) for $100-22000\;cd/m^2$.

• Journal of Power Electronics
• /
• v.11 no.4
• /
• pp.576-582
• /
• 2011

This paper presents a novel control strategy for selective compensation of power quality (PQ) problems, depending upon the limited rating of voltage source inverters (VSIs), through a unified power quality conditioner (UPQC) in a three-phase four-wire distribution system. The UPQC is realized by the integration of series and shunt active power filters (APFs) sharing a common dc bus capacitor. The shunt APF is realized using a three-phase, four-leg voltage source inverter (VSI), while a three-leg VSI is employed for the series APF of the three-phase four-wire UPQC. The proposed control scheme for the shunt APF, decomposes the load current into harmonic components generated by consumer and distorted utility. In addition to this, the positive and negative sequence fundamental frequency active components, the reactive components and harmonic components of load currents are decomposed in synchronous reference frame (SRF). The control scheme of the shunt APF performs with priority based schemes, which respects the limited rating of the VSI. For voltage harmonic mitigation, a control scheme based on SRF theory is employed for the series APF of the UPQC. The performance of the proposed control scheme of the UPQC is validated through simulations using MATLAB software with its Simulink and Power System Block set toolboxes.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.286-291
• /
• 1991

This paper discusses sliding made control of robot manipurators assuming that nonlinear terms, which are inertia term, Coriolis force term and centrifugal taffn, are external disturbances. We obtained the unknown parameter of its linear terms by Signal Compression Method. We propose a new control input algorithm to decrease chattering in the application of sliding mode control of manipulator whose nonlinear components are regarded as disturbances. In this experiments, we used DSP(Digital Signal Processor) controller to suppress chattering by obtaining a quick switching speed.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.970-973
• /
• 2012

In this letter, we report on the development progress of a pressure control organic vapor deposition (PCOVD) technology used to design and build a large area deposition system. We also investigate the growth characteristics of a pentacene thin film by PCOVD. Using the PCOVD method, the mobility and on/off current ratio of an organic thin-film transistor (OTFT) on a plastic substrate are $0.1cm^2/Vs$ and $10^6$, respectively. The developed OTFT can be applied to a flexible display on a plastic substrate.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.405-415
• /
• 2016

This paper presents a model predictive control for shunt active power filters in synchronous reference frame using space vector pulse-width modulation (SVPWM). The three phase load currents are transformed into synchronous rotating reference frame in order to reduce the order of the control system. The proposed current controller calculates reference current command for harmonic current components in synchronous frame. The fundamental load current components are transformed into dc components revealing only the harmonics. The predictive current controller will add robustness and fast compensation to generate commands to the SVPWM which minimizes switching frequency while maintaining fast harmonic compensation. By using the model predictive control, the optimal switching state to be applied to the next sampling time is selected. The filter current contains only the harmonic components, which are the reference compensating currents. In this method the supply current will be equal to the fundamental component of load current and a part of the current at fundamental frequency for losses of the inverter. Mathematical analysis and the feasibility of the suggested approach are verified through simulation results under steady state and transient conditions for non-linear load. The effectiveness of the proposed controller is confirmed through experimental validation.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.709-716
• /
• 2009

In this paper, we propose a novel reconfigurable processor using dynamically partitioned single-instruction multiple-data (DP-SIMD) which is able to process multimedia data. The SIMD processor and parallel SIMD (P-SIMD) processor, which is composed of a number of SIMD processors, are usually used these days. But these processors are inefficient because all processing units (PUs) should process the same operations all the time. Moreover, the PUs can process different operations only when every SIMD group operation is predefined. We propose a processor control method which can partition parallel processors into multiple SIMD-based processors dynamically to enhance efficiency. For performance evaluation of the proposed method, we carried out the inverse transform, inverse quantization, and motion compensation operations of H.264 using processors based on SIMD, P-SIMD, and DP-SIMD. Experimental results show that the DP-SIMD control method is more efficient than SIMD and P-SIMD control methods by about 15% and 14%, respectively.