• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.681-687
• /
• 2010

In this paper, an implementation of force control for a slave mobile robot in tele-operation environment is presented. A mobile robot is built to have a force control capability with a force sensor and tested for force tracking control performances. Both position and contact force are regulated by a PID based hybrid control method and the impedance force control method. To minimize accumulated errors due to the adaptive impedance force control method, the novel force control method with a weighted function is proposed. Experimental studies of regulating contact forces for different control algorithms are tested and their performances are compared.

• 제어로봇시스템학회논문지
• /
• 제11권4호
• /
• pp.337-343
• /
• 2005

In this paper, experimental studies of force control of the crack tracking robot are presented. The crack tracking robot should maintain constant contact with the road to perform cleaning process of the crack effectively. Regulating desired force on the road requires a sophisticated force control algorithm. Here, two main force control algorithms such as the impedance force control and the explicit force control are used. Performances of two force control algorithms are compared.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.85.1-85
• /
• 2002

In this paper, a control strategy of position and force is proposed based on a switching algorithm. The main focus is the control of position and force in the same direction. The switching algorithm based on a fuzzy algorithm determines the weighting value of force control. First, the force control is dominant. If the position gets closer to the desire position, the weighting value of force control is closer to zero. The proposed algorithm is shown to be satisfactory to position and force control and the weighting factor is quite successful by simulation examples.

• 대한임베디드공학회논문지
• /
• 제6권5호
• /
• pp.303-309
• /
• 2011

In this paper, an intelligent force control technique is applied to an autonomous helicopter. Although most research on the autonomous helicopter system is about navigation and control, force control of an autonomous helicopter system is quite new and not presented yet. After controlling the position of the helicopter by the LQR method, force control is applied. The adaptive impedance force control algorithm is introduced and tested to regulate the desired force under unknown location and stiffness of the environment. To compensate for uncertainty from outer disturbance, a neural network is added to form an intelligent force control framework. Simulation studies show that the proposed force control algorithm works well.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.9-20
• /
• 1998

In recent manufacturing process, the increase of productivity has been attempted by reducing machining time with the increase of cutting force. However, the excessive increase of cutting force can cause tool breakage and have a bad effect on both manufacturing machine and workpiece. Thus, it is necessary to estimate and control the cutting force in real time during the process. In this study, use of disturbance observer is proposed for the indirect cutting force estimation. The estimated cutting force is used for the real-time control of feedrate, making the actual cutting force follow the reference force command. Since the suggested method does not need an expensive sensor like a dynamometer, the method is expected to be used practically. Since the actual cutting force follow the reference force, resulting the reducing of the machining time the increase of productivity are also expected, and the quality of cutting surface has been improved due to the adjusted feedrate. Besides, an actual constant cutting force guarantees the prevention of tool breakage. To show the effectiveness of the suggested cutting force control method, an experimental setup has been made without sensor and applied to several workpieces. Experiments show that the suggested method is effective to cutting force control of a CNC machining center.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.55-60
• /
• 2018

Force-controlled electro-hydrostatic actuators have to exhibit high backdrivability, to quickly compensate for force control errors caused by externally disturbed rod movement. To obtain high backdrivability, the servomotor for driving the hydraulic pump, should rotate exactly to such a revolution to compensate for force control errors, compressing or decompressing cylinder chambers. In this study, we proposed a modified velocity control structure, including a robust internal-loop compensator (RIC)-based velocity controller, for the servomotor to improve backdrivability of a force-controlled EHA. Performance improvement was confirmed experimentally, wherein sinusoidal velocity disturbance was applied to the force-controlled EHA, with constant reference input. Its dynamic force control errors reduced effectively, with the proposed control scheme, compared to test results with a conventional motordriver, for motor velocity control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1124-1127
• /
• 1996

Asymmetric cylinders are usually used as an actuator of active suspensions. Since the force is influenced not only by the control but by the road roughness, force control is needed to track the desired force. But the conventional error feedback control treats the valve-cylinder dynamics at its operating point and many use the symmetric model which differ in all respects. We adopt an asymmetric cylinder model and apply a feedback linearization method for the force control to compensate both the valve nonlinearities and the effects of the road roughness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.308-310
• /
• 1994

Position control for robot manipulator may not suffice when any contacts are made between the end-effector and various environments. Therefore interaction forces must be controlled in tasks performed by robot manipulator. In general, there are two types of force control for robot manipulator. One is a stiffness control and the other is a hybrid position/force control. Stiffness control is that environment can be modeled as a spring and utilizes the desired normal force to determine the desired normal position. Hybrid position/force control, however, can be used for robot manipulator to track position and force trajectories simultaneously. This paper will compare the result of the hybrid position/force control method with that of the stiffness control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.140-144
• /
• 1990

On force control of robot, the transient response of the force is as important as the steady state value. We analyze the force for an 1 d.o.f. model. Based on the analysis, we finds out a desirable condition of the control system parameters for stability of the force. We propose a force rate feedback control for implementation. Through experiments we shows that the force can be controlled stably for an arbitrary environment.

• 항공우주기술
• /
• 제12권1호
• /
• pp.54-63
• /
• 2013

항공기의 자세제어를 담당하는 각각의 비행 조종면에 중복안정성 등의 이유로 여러 개의 작동기를 연결하여 사용하고 있다. 다중 작동기들이 동시에 정확하게 같은 위치로 이동하지 않으면 비행조종면에 변형이 발생한다. 그 결과 변형된 조종면이 원래 상태로 복원하려는 힘에 의해 작동기들 간에 force fighting이 발생한다. 게다가 force fighting은 각 장치들의 초기 허용 오차 등에 의해서도 발생한다. 다중 작동기간의 force fighting 현상은 제어정밀도에 영향을 미치고 피로파괴의 원인이 되어 작동기와 비행조종면의 수명을 단축할 수도 있다. 본 논문에서는 두 개의 서보작동기를 사용하는 시스템의 force fighting을 감소하기 위하여 힘되먹임제어를 사용하는 제어기를 설계하였다.