• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.990-994
• /
• 2000

The design of LAI(Local Area Identifier), the first paging area for searching the mobile terminal has a close relation with the performance of paging channel in CDMA cellular network. This paper discusses the performance of the forward channel of IS-95 CDMA standard, known as the paging through the related messages such as call control message, channel assignment message. Modeling and simulation work were conducted to quantify the performance of paging channel in terms of traffic handling capacity and blocking levels. This result serves as illustrative guidelines for the proper engineering of common control channel, which has a major impact on the overall performance of cellular network.

• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.51-62
• /
• 2012

The exponential growth in wireless services has resulted in an overly crowded spectrum. The current state of spectrum allocation indicates that most usable frequencies have already been occupied. This makes one pessimistic about the feasibility of integrating emerging wireless services such as large-scale sensor networks into the existing communication infrastructure. Cognitive radio is an emerging dynamic spectrum access technology that can be used for flexibly and efficiently achieving open spectrum sharing. Cognitive radio is an intelligent wireless communication system that is aware of its radio environment and that is capable of adapting its operation to statistical variations of the radio frequency. In ad hoc cognitive radio networks, a common control channel (CCC) is usually used for supporting transmission coordination and spectrum-related information exchange. Determining a CCC in distributed networks is a challenging research issue because the spectrum availability at each ad hoc node is quite different and dynamic due to the interference between and coexistence of primary users. In this paper, we propose a novel CCC selection protocol that is implemented in a distributed way according to the appearance patterns of primary systems and connectivity among nodes. The proposed protocol minimizes the possibility of CCC disruption by primary user activities and maximizes node connectivity when the control channel is set up. It also facilitates adaptive recovery of the control channel when the primary user is detected on that channel.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06d
• /
• pp.187-189
• /
• 2012

The medium access control (MAC) protocol is designed only for single channel in the IEEE 802.11 standard. That means the throughput of the network is limited by the bandwidth of the single channel. The multiple channels can be exploited to get more concurrent transmission. In this paper, we propose a novel Multi-channel MAC that utilizes the channel more efficiently than other Multi-channel MAC protocols.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.355-362
• /
• 2009

In real-time communication services, delay constraints are among the most important QoS (Quality of Service) factors. In particular, it is difficult to guarantee the delay requirement over wireless channels, since they exhibit dynamic time-varying behavior and even severe burst-errors during periods of deep fading. Channel throughput may be increased, but at the cost of the additional delays when ARQ (Automatic Repeat Request) schemes are used. For real-time communication services, it is very essential to predict data deliverability. This paper derives the delay distribution and the successful delivery probability within a given delay budget using a priori channel model and a posteriori information from the perspective of queueing theory. The Gilbert-Elliot burst-noise channel is employed as an a Priori channel model, where a two-state Markov-modulated Bernoulli process $(MMBP_2)$ is used. for a posteriori information, the channel parameters, the queue-length and the initial channel state are assumed to be given. The numerical derivation is verified and analyzed via Monte Carlo simulations. This numerical derivation is then applied to a rate control scheme for real-time video transmission, where an optimal encoding rate is determined based on the future channel capacity and the distortion of the reconstructed pictures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.77-78
• /
• 2009

We report numerical simulations to investigate of the dependence of the on/off current ratio and channel charge distributions in silicon nanowire (SiNW) field-effect transistors (FETs) on the channel width and thicknesses. In order to investigate the transport behavior in devices with different channel geometries, we have performed detailed two-dimensional simulations of SiNWFETs and control FETs with a fixed channel length L of 10um, but varying the channel width W from 5nm to 5um, and thickness t from 10nm to 30nm. We have shown that $Q_{ON}/Q_{OFF}$ drastically decreases (from ${\sim}2.9{\times}10^4$ to ${\sim}9.8{\times}10^3$) as the channel thickness increases (from 10nm to 30nm). As a result of the simulation using a quantum model, even higher charge density in the bottom of SiNW channel was observed than that in the bottom of control channel.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.185-193
• /
• 2007

This paper evaluates the performance combining space-time transmit diversity (STTD) and an efficient channel estimator (ECE) for wideband code division multiple access (WCDMA) systems in various mobile channels. Using decision variable (DV), we also derive the analytic bit error rate (BER) and mean square error (MSE) for WCDMA applying ECE for STTD schemes. The simulation results show that the ECE performance is superior to the previous works in [1] as because we use additional pilot diversity which is so called secondary common control physical channel (S-CCPCH). The performance in case of the channel estimator using only one-channel or two-channel is worse than that of an ECE as about the maximum 4 dB at BER 1.0E-3 satisfying voice service over Rician fading channel. Our results show that, even with ICE, an ECE algorithm are effective in improving the output SNR and significantly reduce the error floor. In addition, the simulation results investigated in this paper also reveal that WCDMA combining an ECE and the STTD scheme could provide appreciable performance improvements in Rayleigh fading channel.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.9
• /
• pp.728-731
• /
• 2009

We report numerical simulations to investigate of the dependendce of the on/off current ratio and channel charge distributions in silicon nanowire (SiNW) field-effect transistors (FETs) on the channel width and thicknesses. In order to investigate the transport behavior in devices with different channel geometries, we have performed detailed two-dimensional simulations of SiNWFETs and control FETs with a fixed channel length L of $10\;{\mu}m$, but varying the channel width W from 5 nm to $5\;{\mu}m$, and thickness t from 10 nm to 30 nm. We have show that $Q_{ON}/Q_{OFF}$ drastically decreases (from $^{\sim}2.9{\times}10^4$ to $^{\sim}9.8{\times}10^3$) as the channel thickness increases (from 10 nm to 30 nm). As a result of the simulation using a quantum model, even higher charge density in the bottom of SiNW channel was observed then in the bottom of control channel.

• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.140-149
• /
• 2010

Green communication is a new paradigm of designing the communication system which considers not only the processing performance but also the energy efficiency. Power control management is one of the approaches in green communication to reduce the power consumption in distributed communication system. In this paper, we propose improved power control schemes for mobile satellite systems with ancillary terrestrial components (ATCs). In order to increase system capacity and reduce the transmitting power of the user's equipment, we propose an efficient channel estimation method consisting of a modified open-loop power control (OLPC) and closed-loop power control (CLPC). The OLPC works well if the forward and reverse links are perfectly correlated. The CLPC is sensitive to round-trip delay and, therefore, it is not effective in a mobile satellite system. In order to solve the above problem, we added monitoring equipment to both the OLPC and CLPC to use information about transmitting power that has not yet been received by the receiver over the satellite/ATC channel. Moreover, we adapted an efficient pilot diversity of both OLPC and CLPC in order to get a better signal to interference plus noise ratio estimation of the received signal.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.3
• /
• pp.1-11
• /
• 1991

As increasing needs of marine transportation , world merchant fleet and ship's size were enlarged and it caused frequent disasters in human lives and natural environment. By the reason of the above, they started to establish the Vessel Traffic System (VTS) at the European coast in 1960' and most of advanced contries established and managed it to prevent the sea traffic accidents in these days. The concept of traffic control at sea can be divided into three types. First, the initial gathering of informations about ship's identity and movement etc.. Second, monitoring of the traffic flow and amendment of instructions. Third , organization and direction of ships by allocating routes and speeds. Where the goal of traffic control is safety of traffics and developing effectiveness of navigation channel, if traffic volume is less tan channel capacity then the above first or second level of control would be sufficient but if it is bigger than that , more positive policy of control should be adopted as same as third type of the above. In this paper where the strategy of VTS is focused on the control of traffic density to be spread equality, as possible , all over the navigation channels and also improvement of effectiveness , it suggests algorithm to assign the vessels to the channels with balanced traffic density , and other algorithms using D.P. to sequence the vessels assigned to one channel in optimum order which decreases the mean waiting time in sense of channel effectiveness with numerical examples.

• Annual Conference of KIPS
• /
• 2014.04a
• /
• pp.206-209
• /
• 2014

Control message exchange is major job for cognitive radio to exist and use spectrum opportunistically. For this control message exchange they need a common control channel (CCC). Once this channel is affected by a primary user, communication stops until new CCC is setup. This takes substantial time and if they could not get free channel, this halt continues for long time. To prevent such cease of communication, we propose a combination of two networks, namely WLAN and UWB, to let the communication continue. In our proposed idea if the CCC of a certain CR in WLAN is affected, the CR changes its network from WLAN to UWB and keeps the communication because UWB cannot be affected by PU. In the proposed idea every cognitive radio has two transceivers; one for the overlay network (WLAN) and another UWB network. If a primary user is detected in the spectrum of a cognitive radio, it continues exchanging control messages under the UWB network and in parallel negotiates for a new CCC using the WLAN network. This idea solves the communication interruption until new CCC is setup.